Ultrasonic testing device for BP materials
Evenly arrange 5 ultrasonic probes! By moving in the X-Y axis direction, inspect the entire surface for flaws.
The "Ultrasonic Testing Device for BP Materials" is a device that automatically detects internal defects in BP materials. It automatically inspects the workpiece set by a robot, sends a completion signal to the robot, and the robot then discharges the workpiece. The inspection is carried out automatically according to a pre-set program. Additionally, this device has 5 testing channels. 【Inspection Specifications】 ■ Five ultrasonic probes are evenly arranged, and by moving in the X-Y axis direction, the entire inspection surface is tested. ■ The inspection is conducted while spraying water from the holder of the ultrasonic probes, allowing inspection without submerging the workpiece. ■ The inspection results display the scanned area on the inspection monitor and determine pass or fail based on the criteria. *For more details, please refer to the PDF document or feel free to contact us.
basic information
【Main Equipment Specifications】 ■ Equipment Size: Within Width 1500 × Height 2000 × Depth 1500 mm ■ Mechanism ・Scanning Speed: 600 mm/sec ・Inspection Pitch: Minimum 0.2 mm pitch (freely adjustable from 0.1 to 10 mm) ・Cycle Time: 10 min ・Safety: Area sensors, emergency stop ■ Measurement Section: 5 ultrasonic probes (5 probe cables) ■ Pneumatic/Power Source: Primary air pressure of 0.35 Mpa or more / Power supply AC200V 3-phase 50Hz *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
