Piston ultrasonic inspection device <manual>
The finished pistons are subject to inspection! If the type of work changes, it is necessary to change the setup to a dedicated jig.
The "Piston Ultrasonic Inspection Device <Manual>" is a device used to check for the presence or absence of wear ring delamination in pistons. By rotating the piston, it is possible to inspect the measurement points all around. The operator sets the piston on the inspection table and presses the start button to begin the inspection, after which the operator removes the workpiece once the inspection is complete. 【Device Specifications (Partial)】 ■ Equipment Size (Mechanical Part): 750 × Height 2230 × Depth 1100 mm (including transport gantry) ■ Test Material - Finished piston (with wear ring cast in) - Assumed: φ70–100 mm - Material: Cast aluminum *For more details, please refer to the PDF document or feel free to contact us.
basic information
【Other Equipment Specifications】 ■Mechanism Section - Power Supply: AC380V/50Hz Three-phase - Cycle Time: 10.5 seconds or less - Testing Water: Mainly water mixed with cutting oil or water-soluble rust preventive oil ■Measurement Section - Ultrasonic Testing Device (Manufactured by us) - Measurable Channels: 10CH - Probe Specifications: 10MHz 1.0PF type, through-type probe - Sensitivity: 0–80dB - Judgment Level Adjustment Range: 3 gates - Monitor: Touch panel type *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
