Ultrasonic Testing Device for Cylinder Block Bore for the Manufacturing Industry
Achieving precise and speedy inspection of cylinder block bores through 360-degree ultrasonic testing with 4-axis drive.
The "Cylinder Block Bore Ultrasonic Testing Device" is an automatic ultrasonic testing device for inspecting the cylinder block bore (the delamination of the copper and steel joint). It consists of an inspection section (ultrasonic testing section, mechanism section) and a water drainage section. The ultrasonic testing section is composed of an ultrasonic tester and a data processing computer, allowing for the setting of testing conditions, monitoring and saving results, and reading data. After fully submerging the workpiece in water for ultrasonic scanning in the mechanism section, the workpiece is automatically transported to the water drainage area, where air blow is applied from the top, bottom, and sides. 【Inspection Specifications】 ■ Ultrasonic testing is performed sequentially within each bore. ■ The ultrasonic beam is reflected at a 90° angle using a mirror mechanism attached to the tip of the probe to inspect the inner surface of the bore. ■ The ultrasonic probe mechanism rotates and moves up and down to inspect the front surface of the inner side of the bore. *For more details, please refer to the PDF document or feel free to contact us.
basic information
【Main Inspection Specifications (Partial)】 ■ Equipment Size - Inspection Section: Width 1620mm × Depth 1911mm × Height 2614mm - Water Drain Section: Width 1650mm × Depth 1360mm × Height 1795mm ■ Water Tank Size - Inspection Section: Width 1300mm × Depth 770mm × Height 500mm - Water Drain Section: Width 480mm × Depth 340mm × Height 150mm ■ Ultrasonic Probe: 10MHz PF1.5 (1Ch/Frequency Range: 1MHz to 15MHz/Sensitivity: 0 to 80dB) ■ Power Source/Air Pressure: Supply Voltage AC200V 3-phase/0.4Mpa or more ■ Cycle Time: Total 375 seconds (approximately 6 minutes 15 seconds) to 305 seconds (approximately 5 minutes) *Bore Diameter: Φ33.5 to Φ17 *For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
catalog（2）
Download All Catalogs
Recommended products
Distributors
Since our establishment, we have specialized in products for non-destructive testing. Among them, our "Piston Wear Ring Joint Inspection Device," which inspects the quality of automotive pistons, has a proven track record with some of the world's leading piston manufacturers and boasts top-level delivery achievements in the Asian region. We are able to handle everything from the design and manufacturing to programming of non-destructive testing equipment in-house, allowing us to produce original inspection devices tailored to our customers' needs. Our after-sales maintenance is also thorough, ensuring long-lasting use.