Corrosion-resistant gas fluorine coating agent "PCH Series" aerosol
If you are troubled by the sulfide and discoloration of silver plating and silver wiring on electronic substrates and LEDs, please consider our "high sulfur resistance fluorine coating agent."
The fluorine coating with sulfur resistance prevents sulfide formation on silver wiring and silver plating. Additionally, it uses a special solvent that is classified as a non-hazardous material under the Fire Service Act. Compared to typical organic solvent-based coatings... - Fast drying at room temperature (approximately 5 to 10 minutes) - Low toxicity (compared to toluene and xylene) 【Features】 ■ Forms a strong fluorine coating that dries at room temperature ■ Exhibits excellent adhesion to various substrates ■ Can be applied by dipping, spraying, or dispensing ■ Transparent coating does not reduce light transmittance ■ PFOA compliant, not subject to PRTR It has already been adopted by many assembly manufacturers.
basic information
【General Characteristics】 ■Adhesion (Cross-Cut Method) ・Glass: 100/100 ・ABS: 100/100 ・SUS: 100/100 ・Copper: 100/100 ・PMMA: 100/100 ■Tensile Test ・Tensile Strength: 0.9MPa ・Elongation: 360% ・Young's Modulus: 10MPa ■Surface Resistivity: 9.3E+15Ω ■Volume Resistivity: 1.5E+15Ω・cm ■Dielectric Constant: 1.31 ■Moisture Permeability: 280g/m2･24Hr *For detailed information, please request from "Contact Us."
Price range
Delivery Time
Model number/Brand name
AegisCoat PCH-029
Applications/Examples of results
【Usage】 ■Prevention of sulfide formation on LED silver-plated parts ■Moisture and drip protection for LED elements and substrates ■Corrosion gas countermeasures for electronic substrates *For detailed information, please request through "Contact Us."
