エヌエスティー Official site

Hand-cranked easy MR sensor mounting angle measuring device! No motor drive required. Can be adjusted safely, accurately, and in a short time.

【Measurement Content】Phase difference between the motor and MR sensor, current angle of the MR sensor 【Measurement Accuracy】Within ±1° Repetition accuracy under standard conditions in our standard environment 【Target Motor】Number of poles: 2 to 9 poles 【Induced Voltage】Below 100V Number of poles can be set 【Target MR Sensor】Signal input: 0 to 5V 【Power Supply】Single-phase AC 100V-240V 50/60Hz 【External Dimensions】(mm) W310 × H320 × D120 【Weight】3.5 kg 【Operating Environment】Temperature 0°C to 50°C 【Humidity】15% to 85% 【Accessories】Motor connection cable (clip) MR sensor connection cable (M4 round terminal) Electromagnetic brake connection cable (clip) AC 100V power supply cable

Even without knowledge of resolvers, phase alignment (installation angle adjustment) can be easily done!

【Specifications】 ■Measurement Content 　・Phase difference between motor and resolver 　・Current angle of the resolver ■Measurement Accuracy: Within ±0.1° Repetition accuracy under standard conditions in our standard environment ■Target Motor 　・Number of pole pairs: 2 to 9 pole pairs 　・Induced voltage: 100V or less, pole pair setting possible ■Target Resolver 　・Axis multiplication factor: 1 to 9 times 　・Transformation ratio: 0.14 to 0.66, axis multiplication setting possible ■Power Supply: Single-phase AC 100V-240V, 50/60Hz ■External Dimensions (mm): W310×H320×D120 ■Weight: 3.5kg ■Operating Environment 　・Temperature: 0℃ to 50℃ 　・Humidity: 15% to 85% *For more details, please refer to the catalog or feel free to contact us.