ONOSOKKI Official site

Familiar to the hand and easy to use design! Equipped with a memory function convenient for checking measurement results.

【Other Features (HT-5500)】 ■ Contact and non-contact measurement compatible ■ Capable of displaying maximum and minimum values during measurement ■ Equipped with memory function ■ Large LCD with backlight *For more details, please refer to the PDF document or feel free to contact us.

Non-contact detection of manufacturing line speeds and speed variations! High-sensitivity, high-response laser in-plane velocimeter.

【Other Features】 ■ No need for laser protection glasses, regulations, or management for laser-controlled areas ■ The detection area can be clearly identified, making positioning and verification quick and easy ■ Detection by laser light eliminates the occurrence of defects such as scratches, wrinkles, and deformations caused by rubbing ■ Simultaneous confirmation of the target and operating conditions is possible ■ Equipped with a large LED display that offers excellent visibility *For more details, please refer to the PDF document or feel free to contact us.

Further high precision and efficiency in quality inspection of semiconductors, EVs, and secondary batteries.

- High precision and high response ─ Measurement accuracy ±0.05 to 0.12 %FS (depending on sensor combination), calculation cycle 10 ms - New features added ─ Temperature measurement and correction function, Ethernet communication (optional) - Improved operability ─ Easy-to-read and user-friendly touch panel display

Achieving high sensitivity and stable measurement - Flagship model of GPS speedometer.

- Measurement range/accuracy: 0.1 to 500.0 km/h / within ±0.1 km/h (when horizontal speed is 30 km/h or more, with more than 7 satellites, and no multipath) - Accuracy: When using built-in IMU or external IMU: ±0.1% When using external high-precision IMU: ±0.05% (when straight distance is 300 m, horizontal speed is 30 km/h or more, with more than 7 satellites, and no multipath)

Accurate detection of even the slightest changes - Flanged high-rigidity torque detector -

Rated torque: 5,000 N·m Rated sensitivity (zero to rated torque): 5,000 Hz Non-linearity including hysteresis: ±0.05 % FS or less, ±0.02 % FS or less (option TQ-0435) Rated rotational speed: 8,000 r/min

Expand 'hakaru' to measure the torque of various products.

- Rated torque: RH-1105 10 N·m, RH-1205 20 N·m - Rated rotational speed (standard): 16,000 r/min - Rated rotational speed (optional RH-0502 during dynamic balance adjustment): 20,000 r/min

A detector optimal for measuring rotational speed. Detection distance from the gear expanded up to a maximum of 3 mm.

MP-9810 (Basic Type): 0 Hz to 20 kHz, signal cable and extension cable sold separately MP-9830 (High-Speed Type): 0 Hz to 100 kHz, signal cable and extension cable sold separately

A new standard for tachometers that integrates four models.

TM-4100 Series Basic 1ch Input TM-4200 Series 2ch Input Rotation Speed Difference / Speed Ratio TM-4300 Series Accumulating / Adding and Subtracting Counter (Reversible Counter) TM-4400 Series Passage Time / Passage Speed

Tangled cables and no worries about installation location: simultaneous wireless measurement of temperature and voltage.

Communication standard: 2.4 GHz wireless communication (proprietary method) Communication distance: Up to 30 m (provided there are no obstacles or radio noise and it is stationary) Supported thermocouples: K, T, J (conductor diameter 0.4 to 0.8 mm / 24 to 20 AWG)

Easy-to-read large color LCD! Compact size for easy handling and user-friendly high-performance sound level meter.

【Other Features】 ■ Equipped with a home key ■ Japanese language switch display ■ Convenient capture function for screen shots ■ Power supply via USB - enables long-duration measurements ■ Wind screen correction function ■ External power ON/OFF function - suitable for embedded use *For more details, please refer to the PDF document or feel free to contact us.

For noise reduction measures in EVs and home appliances. A low-noise measurement solution that accurately captures subtle sounds in the 10 dB range (A-weighted), which is difficult to measure with standard microphones.

【Product Specifications Overview】 ■ Overwhelming Low Noise Performance Achieves a self-noise level of 4.5 dB (typical value). It accurately captures low noise levels around 10 dB (A-weighted) that would typically be buried in noise with conventional microphones. ■ Simple System Configuration (CCLD Method) Adopts a constant current drive (CCLD) method. It can be directly connected to the analyzer with just one BNC cable, without the need for external amplifiers or dedicated power supplies. This simplifies the measurement system and reduces costs. ■ Automation of Settings (TEDS Compatible) With the TEDS function, individual information such as sensitivity is automatically read just by connecting the device. This eliminates the hassle of manual input and setting errors, significantly shortening preparation time for measurements. ■ High Mobility and Versatility When combined with battery-powered devices like the DS-5000, it enables laboratory-quality field measurements even in vehicle interiors or outdoor environments where securing power is challenging.

An analysis system that allows acoustic vibration analysis to be performed "anywhere, anytime, easily."

1. Maximum number of input channels: 40 kHz system: 48 ch, 100 kHz system: 4 ch 2. Maximum number of input/output units: 40 kHz system: 8 units, 100 kHz system: 3 units 3. Application software - FFT analysis function - Tracking analysis function - Octave analysis function - Sound quality evaluation function - Acoustic power level measurement - External control function, etc.

A portable FFT analyzer with innovative features and a tough body.

Input Channels: CF-9200A: 2 channels / CF-9400A: 4 channels Frequency Range: 100 mHz to 100 kHz

No more tedious calibration work with TEDS support! Measurement microphones MI series.

【Specifications】 ■Response Type: Free Field Type ■Sensitivity (1 kHz): -26.0± 1.5 dB re.1 V/Pa (50 mV/Pa) ■Frequency Range (1 kHz Reference): 1 Hz to 20 kHz (±2 dB) ■Maximum Sound Pressure Level (250 Hz, Total Harmonic Distortion 3%): 135 dB or more ■Self-Noise Level: Frequency Weighting Characteristic A: 14.0 dB (Typical Value) 　　　　　　　　　Frequency Weighting Characteristic Z: 34.3 dB (Typical Value) ■Static Pressure Characteristic (250 Hz): -0.013 dB/kPa ■Temperature Characteristic (250 Hz): +0.005 dB/K ■Humidity Characteristic (250 Hz): -0.0004 dB/% ■Long-term Stability: 0.03 dB/year or less (under standard environmental conditions) 　　　　　　　0.30 dB/year or less (80 ℃, 23% RH) ■Operating Temperature Range: -30 to +80 ℃ ■Weight: Approximately 41 g *For more details, please refer to the PDF document or feel free to contact us.

Pursuing the precision of acoustic measurement. The MI series measurement microphones from Ono Sokki achieve both high sensitivity and wide bandwidth.

【MI-1271】 This is a precision-grade 1/2 inch back electret microphone. By adopting a laser-welded fixation method for the titanium diaphragm, it achieves extremely high stability. Additionally, it features a wide temperature and humidity range (-30 °C to 80 °C / 0 to 90 %RH) and a broad frequency range (1 Hz to 20 kHz), making it a high-performance microphone capable of meeting various applications such as environmental noise measurement in high temperature and humidity environments, measurement of ultra-low frequency sounds (up to 20 Hz), and sound measurement during cold start tests of automobiles. 【MI-3170】 This is a preamplifier for 1/2 inch back electret condenser microphones, which can be used in combination with the MI-1271 microphone. With the adoption of the CCLD (constant current drive) method and BNC connector, it can be directly connected to many CCLD-compatible amplifiers and analysis equipment. When combined with the MI-1271, it covers the measurement range of ultra-low frequencies starting from 1 Hz and achieves a wide operating temperature range (-30 °C to 80 °C). *For more details, please refer to the PDF document or feel free to contact us.*

It is ideal for vibration measurement on-site.

Measurement items: acceleration, velocity, displacement (can be measured simultaneously)

Achieving high-precision vibration monitoring at production equipment maintenance sites at low cost.

【Features of VC-3200】 ■ Capable of power average calculation and its determination ■ Capable of measuring mechanical vibrations of rotating and reciprocating motion machines ■ Equipped with memory function *For more details, please refer to the PDF document or feel free to contact us.

A non-contact laser Doppler vibrometer that pursues ease of use by confirming the laser irradiation position with an internal camera.

【Other Features】 ■ Easy-to-handle compact and lightweight sensor ■ Easy to store and move ■ Powerful solution with optional measurements *For more details, please refer to the PDF document or feel free to contact us.

Due to its small size and lightweight, it can be easily attached to the measurement target and is easy to handle!

【Lineup (Partial)】 ■NP-2106 ■NP-2506 ■NP-2110 ■NP-2910 ■NP-2810 *For more details, please refer to the PDF document or feel free to contact us.

Wide dynamic range, capable of measuring from minute accelerations! Built-in preamplifier.

【Other Features】 ■ Strong mechanical strength, recommended for measuring high acceleration and impact acceleration ■ Capable of measuring waveforms containing wideband frequency components without distortion ■ The detector itself has a built-in preamplifier, allowing for direct connection to our FFT analyzers and other analysis equipment (Direct connection to older FFT analyzers and other analysis equipment may not be possible) 【Lineup (Partial)】 ■ NP-3560B ■ NP-3572/3574 ■ NP-3211 * For more details, please refer to the PDF document or feel free to contact us.