Plimix Co., Ltd., a manufacturer of high-speed stirrers (headquartered in Awaji City, Hyogo Prefecture), will hold the 22nd Mixing Technology Seminar, Mixing Vision 2020, online on Tuesday, November 10th. The presentations will consist of three sessions (90 minutes each). We will announce the presentation titles! ▼▼━━━━━━ ■ Ion Conduction in Porous Materials ～ How does the electrolyte in electrochemical devices differ from conventional (bulk) electrolytes? ～ Professor Minoru Mizuhata, Kobe University ■ Evaluation of Aggregation and Dispersion of Microparticles and Nanoparticles Using Solubility Parameters (HSP Values) ～ HSP control technology for microparticle surfaces through the application of Hansen solubility spheres ～ Professor Hideki Yamamoto, Kansai University ■ New Challenges for Better "Mixing" of Food ～ Performance evaluation, scale-up, and optimization of equipment and operating conditions using CAE ～ Professor Tetsu Kamiya, Meiji Co., Ltd. ━━━━━━▲▲ * Seminar information will be delivered promptly through our company newsletter. Please take this opportunity to register. (Please enter "Newsletter Request" in the inquiry form below.)

On November 10 (Tuesday), Primes Co., Ltd., a manufacturer of high-speed stirrers based in Awaji City, Hyogo Prefecture, will hold the 22nd Mixing Technology Seminar, Mixing Vision 2020, online. The presentations are scheduled for three sessions (90 minutes each). We will announce the speakers! ▼▼━━━━━━ Professor Hideki Yamamoto, Ph.D. (Engineering) Director of Kansai University, Dean of the Graduate School of Science and Engineering, and Professor in the Department of Environmental Urban Engineering ● Area of expertise: Fundamentals of Hansen solubility parameters, aggregation of fine particles, and dispersion evaluation Dr. Tetsu Kamiya, Ph.D. (Engineering) Head of Research Strategy Group, Research Strategy Department, Research Headquarters, Meiji Co., Ltd. ● Area of expertise: Chemical engineering / CFD simulation / stirring, dispersion, mixing Professor Minoru Mizuhata, Ph.D. (Science) Department of Applied Chemistry, Graduate School of Engineering, Kobe University ● Area of expertise: Fuel cells, inorganic materials chemistry, electrochemistry ━━━━━━▲▲ *Seminar information will be delivered promptly via our newsletter. Please take this opportunity to register. (Please enter "Newsletter request" in the inquiry form below.)

Plimix Co., Ltd., a manufacturer of high-speed mixers based in Awaji City, Hyogo Prefecture, will hold the 22nd Mixing Technology Seminar, Mixing Vision 2020, on November 10 (Tuesday). Due to the unpredictable situation surrounding the COVID-19 pandemic, the method of holding the seminar will be announced next month, and we appreciate your understanding. The technical presentations are scheduled for three sessions (90 minutes each). We are currently inviting speakers who have interesting insights into mixing technology. Stay tuned! ~What is Mixing Vision?~ Mixing Vision is a technical seminar where we invite individuals involved in research and production at companies, as well as university professors who are well-versed in mixing technology, to present their research findings and theories on mixing. *Please note that this seminar is limited to our customers. We kindly ask competitors from the same industry to refrain from applying. *Seminar information will be delivered promptly via our newsletter. We encourage you to register for this opportunity. (Please enter "Newsletter Request" in the inquiry form below.)

Plimix Co., Ltd., a manufacturer of high-speed mixers based in Awaji City, Hyogo Prefecture, is currently exhibiting at the FOOMA JAPAN 2020 (International Food Industry Exhibition) online exhibition. Plimix's mixers contribute to the production of a variety of products, including raw material processing, dressings, and flour pastes. At the online exhibition, we are showcasing various mixing devices that we recommend (emulsification, dispersion, dissolution, heat exchange, kneading, etc.). Please take a look at the online exhibition, which is not restricted by time or location, and feel free to contact us if you have any products of interest. We also welcome inquiries about the Plimixology Challenge, where we conduct tests and analyses using actual customer samples. ■ FOOMA JAPAN 2020 Online Exhibition June 23, 2020 (Tuesday) to August 31, 2020 (Monday) http://www.foomajapan.jp

Since our founding in 1927, we have provided optimal solutions to meet our customers' needs as a leading company in high-speed mixers. As globalization progresses, the business environment is undergoing significant changes. In order for our company to develop alongside our customers' unwavering trust, we must establish a robust management foundation that is resilient to challenges and continuously create cutting-edge mixing technologies driven by an unrelenting spirit of inquiry. To fulfill this mission, we will leverage the core technologies, engineering capabilities, and business know-how that combine technology and maintenance held by the Tsukishima Kikai Group, of which we are a member. We will propose solutions that utilize the group's comprehensive strengths and create innovative products. Additionally, we will strengthen our management foundation while expanding our reach into the markets that the Tsukishima Kikai Group operates in. In order to meet your expectations and trust, we will continue our relentless efforts to respond to the expectations of our customers and society. We kindly ask for your continued support. Primix Corporation President and CEO Jun Kawasaki

FOOMA JAPAN 2020 Osaka (International Food Industry Exhibition) was canceled due to the impact of the novel coronavirus, but the "FOOMA JAPAN 2020 WEB Exhibition" will be held on the official website (http://www.foomajapan.jp) from June 23 (Tuesday) to August 31 (Monday). Primix's mixers contribute to the production of a variety of products, including raw material processing, dressings, and flour pastes. You can find product information on multi-axis dispersion and kneading devices such as CombiMix® that can be widely used for emulsification, powder dispersion, dissolution, heat exchange, and kneading, as well as Leviastear® suitable for dissolving thickeners, CIP-compatible dissolving tank mixers, and the new product Telecorta. We invite everyone who was planning to visit our booth at the exhibition, as well as those who do not often have the opportunity to attend exhibitions, to join us at the FOOMA JAPAN 2020 WEB Exhibition (http://www.foomajapan.jp). We look forward to your visit.

Plimix Co., Ltd., a manufacturer of high-speed mixers (headquartered in Awaji City, Hyogo Prefecture), will start anew as a 100% subsidiary of Tsukishima Kikai Co., Ltd. (Tokyo Stock Exchange First Section: 6332) as of May 15. Additionally, we would like to inform you that the new executive structure has been decided as follows during the extraordinary shareholders' meeting and board of directors meeting held on the same day. ■ New Executive Structure ■ Chairman of the Board: Takashi Furuichi (New Appointment) President and CEO: Atsushi Kawasaki (New Appointment) Senior Managing Director, Head of Marketing Division: Yasuko Nagai Managing Director: Yoshiyuki Okumura Director, Head of Production Division and Head of Service Division: Haruo Shibuya Director, Head of Technology Division: Shigehiro Nitta Director, Head of Customer Relations Division: Koji Nakagawa Outside Director: Hiroyuki Yokomaku (New Appointment) Outside Auditor: Yoichi Fujita (New Appointment)

On March 1st, Primix Co., Ltd. (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), a manufacturer of high-speed stirrers, was featured in the "Oshiete! Hyogo" segment of the San TV program "Hyogo Hasshin!" "Hyogo Hasshin!" is a public information program for the residents of Hyogo Prefecture that airs every Sunday morning. This time, with a focus on employment in Hyogo, reporter Cinderella Express, Hiroka Watanabe, introduced Primix in a fun way. The on-air footage is available on San TV's official YouTube channel. Please take a look! ▼ San TV Official YouTube Channel 2020.3.1 "Hyogo Hasshin!" Oshiete! Hyogo Employment in Hyogo (The latter part of the video features the introduction of Arima Country Club) https://youtu.be/mynM7nUFK5w ▼ Hyogo Hasshin! Official Website http://sun-tv.co.jp/hyogo_hasshin

The Hyogo information program "Hyogo Hasshin!" broadcast on Sun TV every Sunday morning will feature Primix Co., Ltd. (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), a manufacturer of high-speed stirrers. The program's segment "Oshiete! Hyogo" will introduce the headquarters/factory located on Awaji Island. The reporter will be Hiroka Watanabe from Cinderella Express. Although it can only be viewed by residents of Hyogo Prefecture and some areas of Kansai, we encourage those interested to watch. ■ Broadcast Date and Time: March 1 (Sunday) from 8:30 AM to 9:00 AM (Rebroadcast: March 2 (Monday) from 6:00 PM to 6:30 PM) *Please note that the program may change without notice. ▼ Hyogo Hasshin! Official Website http://sun-tv.co.jp/hyogo_hasshin

Plimix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the 11th [International] Secondary Battery Expo (Battery Japan) held at Tokyo Big Sight, Aomi Exhibition Hall from February 26 to 28, 2020. We will showcase peripheral equipment related to improving the quality of slurries, focusing on our Filmix® dispersion devices for electrode materials used in lithium-ion batteries, fuel cells, and all-solid-state batteries. Additionally, we will introduce our efforts in high-capacity electrode materials at the Electrode Plate Manufacturing Technology Research Institute and hold product technology seminars. We invite you to visit our booth for solutions to challenges in electrode plate manufacturing. We look forward to your visit. <11th [International] Secondary Battery Expo> Dates: February 26 (Wednesday) to 28 (Friday), 2020 Hours: 10:00 AM to 6:00 PM (Final day ends at 5:00 PM) Venue: Tokyo Big Sight, Aomi Exhibition Hall [Booth No. A18-42] Organizer: Reed Exhibitions Japan Co., Ltd. *An invitation ticket is required to enter the exhibition venue. If you would like an invitation ticket, please let us know the number you need via the contact form below. We look forward to your visit.

Plimix Co., Ltd., a manufacturer of high-speed mixers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the 11th [International] Secondary Battery Expo (Battery Japan) held at Tokyo Big Sight Aomi Exhibition Hall from February 26 to 28, 2020. We will showcase peripheral equipment related to the improvement of slurry quality, focusing on our Filmix® electrode material dispersion device for lithium-ion batteries, fuel cells, and all-solid-state batteries. We will also introduce our efforts in high-capacity electrode materials at the Electrode Plate Manufacturing Technology Research Institute and hold product technology seminars. Please visit our booth for solutions to challenges in electrode plate manufacturing. We look forward to seeing you there. <11th [International] Secondary Battery Expo> Dates: February 26 (Wednesday) – 28 (Friday), 2020 Hours: 10:00 AM – 6:00 PM *Final day ends at 5:00 PM Venue: Tokyo Big Sight Aomi Exhibition Hall [Booth No. A18-42] Organizer: Reed Exhibitions Japan Ltd. *An invitation ticket is required to enter the exhibition venue. If you would like an invitation ticket, please let us know the number you need using the contact form below. We look forward to your visit.

We sincerely apologize for the inconvenience, but we will be closing for winter holidays on the following dates. We appreciate your understanding. ■ Closure Period: December 28, 2019 (Saturday) to January 5, 2020 (Sunday) Thank you very much for your support this year. In 2019, we completed our second factory and have been promoting activities to improve production efficiency. Additionally, our design department is working on improving drawing management. We will continue to strive to enhance our manufacturing processes to deliver "safety and trust" to our customers, and we appreciate your continued patronage.

This is a notice about an article published by Primix Corporation, a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoshi Furuichi). Our article has been featured on Nikkei BP's special content site, Nikkei xTECH Special. Titled "As Primix Moves to Awaji Island Ahead of Its 90th Anniversary, What Are the Secrets Behind Its Corporate Strategy, Production Technology, and Strengths?", the article introduces our stirring technology as well as our headquarters facilities and work environment. We invite you to read it. ■ Production Technology Responding to the Growing Demand for Batteries - Primix Corporation https://special.nikkeibp.co.jp/atcl/NXT/19/primix1216/

PRIMIX Co., Ltd. (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), a manufacturer of high-speed stirrers, will exhibit at the 4th Advanced Ceramics Exhibition (showcasing everything from raw materials to manufacturing equipment) to be held at Makuhari Messe from December 4 to 6, 2019. We will showcase the continuous dispersion process "CDM Process" using Filmix® and the Hibis Dispermix, which can perform everything from solid mixing to dilution in a single machine for ceramic material dispersion processes. We look forward to your visit. <4th Advanced Ceramics Exhibition [Tokyo Exhibition]> Dates: December 4 (Wednesday) - 6 (Friday), 2019 Hours: 10:00 AM - 6:00 PM (Ends at 5:00 PM on the final day) Venue: Makuhari Messe Organizer: Reed Exhibitions Japan Ltd. ■PRIMIX Booth: 23-1 (Hall 4) *An invitation ticket is required to enter the exhibition venue. If you would like an invitation ticket, please let us know the number you need via the contact form below. We look forward to your visit.

Plimix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Takashi Furuichi), will hold the 21st Mixing Technology Seminar, Mixing Vision 2019, on November 21 (Thursday) at THE GRAND HALL in Shinagawa, Tokyo. We are currently accepting final applications. Please note that registration will close once we reach capacity, so we encourage those interested to apply as soon as possible. ▼▼━━━━━━━━━ Lecture Titles ━━━━━━━━━▲▲ ● Copper nanoparticle systems and their dispersion stabilization for low-temperature sintering 【Speaker】Professor Tetsu Yonezawa, Graduate School of Engineering, Hokkaido University ● Basics and practical aspects of slurry evaluation after grinding, emulsification, and kneading - Learning points in manufacturing from comparisons 【Speaker】Dr. Shinichi Takeda, President, Takeda Colloid Tech Consulting Co., Ltd. ● Application of water-based binders to composite electrodes for lithium-ion batteries 【Speaker】Professor Tatsuhiro Horiba, Research Promotion Organization, Tokyo University of Science

Plimix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will hold the 21st Mixing Technology Seminar, Mixing Vision 2019, on November 21 (Thursday) at THE GRAND HALL in Shinagawa, Tokyo. We are currently accepting final applications. Please note that registration will close once we reach capacity, so we encourage those interested to apply as soon as possible. ▼▼━━━━━━━━━ Lecture Titles ━━━━━━━━━▲▲ ● Copper nanoparticle systems and their dispersion stabilization for low-temperature sintering 【Speaker】Professor Tetsu Yonezawa, Graduate School of Engineering, Hokkaido University ● Fundamentals and practical aspects of slurry evaluation after grinding, emulsification, and kneading – Key points in manufacturing learned from comparisons 【Speaker】Dr. Shinichi Takeda, President, Takeda Colloid Tech Consulting Co., Ltd. ● Application of water-based binders to lithium-ion battery composite electrodes 【Speaker】Professor Tatsuhiro Horiba, Research Promotion Organization, Tokyo University of Science

Prymix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will hold the 21st Mixing Technology Seminar, Mixing Vision 2019, on November 21 (Thursday) at THE GRAND HALL in Shinagawa, Tokyo. Mixing Vision is a technical seminar that invites individuals involved in research and production at companies, as well as university professors who are well-versed in mixing technology, to present research findings and give presentations on mixing theory. For more details, please visit the Prymix website. ▼▼━━━━━━━━━ Lecture Titles ━━━━━━━━━▲▲ ● Copper nanoparticle systems for low-temperature sintering and their dispersion stabilization [Speaker] Professor Tetsu Yonezawa, Graduate School of Engineering, Hokkaido University ● Fundamentals and practical aspects of slurry evaluation after grinding, emulsification, and kneading - Learning points in manufacturing from comparisons [Speaker] Dr. Shinichi Takeda, President of Takeda Colloid Tech Consulting Co., Ltd. ● Application of water-based binders to composite electrodes for lithium-ion batteries [Speaker] Professor Tatsuwo Horiba, Institute for Research Promotion, Tokyo University of Science

The homepage of the Kanagawa Prefectural Kawasaki Library features a section called "Amazing Company Histories," which introduces unique company histories. The 90th anniversary company history of Primix Corporation (Headquarters: Awaji City, Hyogo Prefecture, President: Naoshi Koichi), a manufacturer of high-speed stirrers, has been published there. Kanagawa Prefectural Kawasaki Library Homepage "Amazing Company Histories" 'Primix Corporation 90th Anniversary Company History' Primix Corporation 2017 https://www.klnet.pref.kanagawa.jp/kawasaki/sugo_shashi/sugo_shashi_12.htm#114 *For information on the theme and background of the 'Primix Corporation 90th Anniversary Company History,' please refer to the following. Company Newsletter Shinko - Friendship - June 2017 Issue About the 90th Anniversary History http://www.primix.jp/news/shinko/201706_02.html

On September 9, the Kansai edition of the Nikkei Evening News featured an article about Plaimix Co., Ltd. (Headquarters: Awaji City, Hyogo Prefecture; President: Hisashi Furuichi) in the column "Kansai Timeline: Working." The article introduced the company's relocation of its headquarters from Osaka to Awaji Island and discussed the workplace environment at the Awaji headquarters/factory. *This article can also be read on the electronic version of the Nikkei. 2019/9/9 Nikkei Electronic Edition "Headquarters Relocation from Osaka to Awaji Island: Plaimix" https://www.nikkei.com/article/DGXMZO49508890W9A900C1AA1P00/

On November 21 (Thursday), Primix Corporation, a manufacturer of high-speed stirrers (headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will hold the 21st Mixing Technology Seminar, Mixing Vision 2019, at THE GRAND HALL in Shinagawa, Tokyo. Mixing Vision is a technical seminar where experts in mixing technology, including those involved in research and production in companies and university professors, are invited to present research results and theoretical presentations on mixing. For more details, please visit the Primix website. ▼▼━━━━━━━━━ Lecture Titles ━━━━━━━━━▲▲ ● Copper nanoparticle systems for low-temperature sintering and their dispersion stabilization [Speaker] Professor Tetsu Yonezawa, Graduate School of Engineering, Hokkaido University ● Fundamentals and practical aspects of slurry evaluation after grinding, emulsification, and kneading – Learning points in manufacturing from comparisons [Speaker] Dr. Shinichi Takeda, President, Takeda Colloid Tech Consulting Co., Ltd. ● Application of water-based binders to composite electrodes for lithium-ion batteries [Speaker] Professor Tatsuwo Horiba, Institute for Research Promotion, Tokyo University of Science

Prymix Co., Ltd., a manufacturer of high-speed mixers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoshi Furuichi), will hold the 21st Mixing Technology Seminar, Mixing Vision 2019, on November 21 (Thursday) at THE GRAND HALL in Shinagawa, Tokyo. Mixing Vision is a technical seminar that invites individuals involved in research and production at companies, as well as university professors who are well-versed in mixing technology, to present research results and theories related to mixing. This seminar, which started in 1975 under the name Mixing Salon, has been held biennially but has become an annual event since last year. Details about the program and registration methods will be provided soon on the Prymix website and other platforms. *Please note that this seminar has a limited capacity and requires complete reservations. *This seminar is exclusively for our customers. We kindly ask competitors from other companies to refrain from applying.

PRIMIX Corporation, a manufacturer of high-speed mixers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at "FOOMA JAPAN 2019 International Food Industry Exhibition" held at Tokyo Big Sight from July 9 to 12. We will showcase various mixers including the CombiMix®. The seminar, which is free to attend, requires prior registration, so please register through the official website. We look forward to your visit. <FOOMA JAPAN 2019> Dates: July 9 (Tuesday) - 12 (Friday), 2019 Time: 10:00 AM - 5:00 PM ■PRIMIX Booth: Tokyo Big Sight, West Hall, West 2L-24 ◎Exhibitor Presentation Seminar *Prior registration required July 12 (Friday) 1:45 PM - 2:30 PM, Conference Building 6th Floor, Room 607 "Examples of Dissolving Thickeners Using High-Speed Mixers" ▼Pre-registration page for the seminar▼ https://www.foomajapan.jp/contact/registration/exhibitor_presen.php?semi=27

PRIMIX Corporation, a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the 21st INTERPHEX JAPAN held at Tokyo Big Sight from July 3 to 5, 2019. In addition to showcasing manufacturing equipment for pharmaceuticals and cosmetics (emulsifiers, dispersers, kneaders, etc.), we will also hold free technical seminars. We look forward to your visit. <21st INTERPHEX JAPAN> Dates: July 3 (Wednesday) - 5 (Friday), 2019 Hours: 10:00 AM - 6:00 PM (Final day ends at 5:00 PM) ■PRIMIX Booth: Tokyo Big Sight South Hall S4-4 ◎ Product and Technology Seminars by Exhibitors July 5 (Friday) 1:40 PM - 2:40 PM, South Hall 2nd Floor S-1 "Selection of High-Speed Stirrer for Fine Particle Dispersion" We will introduce equipment selection in high-speed stirring technology, focusing on application examples for improving functionality such as dissolution and dispersion. Instructor: Chihiro Asano, Emulsification and Dispersion Technology Research Institute (R) *No prior registration required, please come directly to the venue.

PRIMIX Corporation, a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the "21st INTERPHEX JAPAN" and "FOOMA JAPAN 2019 International Food Industry Exhibition" held at Tokyo Big Sight in July, for two consecutive weeks. We look forward to your visit. <21st INTERPHEX JAPAN> Dates: July 3 (Wednesday) - 5 (Friday), 2019 Hours: 10:00 AM - 6:00 PM *Last day ends at 5:00 PM ■PRIMIX Booth: Tokyo Big Sight South Hall S4-4 ◎Product and Technology Seminar by Exhibitors July 5 (Friday) 1:40 PM - 2:40 PM, South Hall 2nd Floor S-1 "Selection of High-Speed Stirrer for Fine Particle Dispersion" <FOOMA JAPAN 2019> Dates: July 9 (Tuesday) - 12 (Friday), 2019 Hours: 10:00 AM - 5:00 PM ■PRIMIX Booth: Tokyo Big Sight West Hall West 2L-24 ◎Exhibitor Presentation Seminar *Pre-registration required July 12 (Friday) 1:45 PM - 2:30 PM, Conference Building 6th Floor Room 607 "Case Study of Thickener Dissolution Using High-Speed Stirrer"

Plimix Co., Ltd., a manufacturer of high-speed mixers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), has completed the construction of its second factory, which has been underway since the end of last year to accommodate the recent increase in orders. The completion ceremony was held on May 24, attended by guests including Awaji City Mayor Kado, construction-related personnel, and company representatives, who prayed for the safety and development of the new factory. With the completion of the second factory, the assembly area for mixers has doubled, improving the workability for assembling large machines. We aim to strengthen our integrated production system at the headquarters/factory, reduce delivery times, and further enhance quality. ■Overview of the Second Factory Location: 1-38 Yumebutai, Awaji City, Hyogo Prefecture Structure: Single-story frame membrane structure Area: Total floor area of 1,206.49 square meters

Primix Co., Ltd., a manufacturer of high-speed mixers (headquartered in Awaji City, Hyogo Prefecture, President: Hisashi Furuichi), is currently constructing a second factory, as we have announced since last year. The construction of the second factory (factory expansion) will nearly double our current production capacity, and we will also review our business processes, including layout changes in the existing factory, to improve productivity. ▼ Primix Company Newsletter shinko ~Friendship~ December 2018 Issue Groundbreaking Ceremony for the Second Factory http://www.primix.jp/news/shinko/201812_01.html

At the China International Beauty Expo 2019, Primix Shanghai was awarded for its contributions to the Chinese beauty industry. Starting tomorrow, we will be exhibiting at the 9th Cosmetics Industry Technology Expo CITE JAPAN 2019. We look forward to welcoming everyone from the beauty cosmetics industry. <CITE JAPAN 2019 Overview> Dates: May 15 (Wednesday) - 17 (Friday), 2019 Hours: 10:00 AM - 5:00 PM *Final day ends at 4:00 PM Venue: Pacifico Yokohama Organizer: Japan Cosmetic Ingredients Association ■PRIMIX Booth: D23-10 ▼Exhibitor Technical Presentation▼ Date and Time: May 16 (Thursday) 11:35 AM - 12:05 PM Location: Exhibition Hall 2nd Floor Annex Hall F "New Developments in High-Speed Mixers - Proposals for Cosmetic Applications"

PRIMIX Co., Ltd., a manufacturer of high-speed mixers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoshi Furuichi), will exhibit at the 9th Cosmetics Industry Technology Exhibition (CITE JAPAN 2019) to be held at Pacifico Yokohama from May 15 to 17, 2019. PRIMIX's cosmetic manufacturing machines (emulsifiers, dispersers, kneaders, etc.) have a proven track record in the cosmetics industry. At our booth, we will showcase stirring machines ideal for cosmetic research and development and production, including the vacuum emulsification device/system Clearstar(R), which allows for automatic cleaning, and Filmix(R), which enables particle design down to the nanoscale. We look forward to your visit. <CITE JAPAN 2019 Overview> Dates: May 15 (Wednesday) - 17 (Friday), 2019 Hours: 10:00 AM - 5:00 PM (last day ends at 4:00 PM) Venue: Pacifico Yokohama Organizer: Japan Cosmetic Ingredients Association ■PRIMIX Booth: D23-10 ▼Exhibitor Technical Presentation▼ Date and Time: May 16 (Thursday) 11:35 AM - 12:05 PM Location: Exhibition Hall 2nd Floor Annex Hall F "New Developments in High-Speed Mixers - Proposals for Cosmetic Applications"

Primix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the 10th International Secondary Battery Expo (commonly known as Battery Japan) held at Tokyo Big Sight from February 27 to March 1. We will also hold a free seminar on dispersion technology at the venue. We look forward to welcoming everyone involved in the manufacturing and research and development of secondary batteries. ◇ Product and Technology Seminar by Exhibitors [Free Admission] Date and Time: February 27, 2019 (Wednesday) 13:40 - 14:40 Speakers: Tsukasa Ohata and Takayuki Wani from Primix Battery Device Division PEACE Presentation Content: ■ Introduction of new CDM electrode slurry process for LIB and dispersion technology for all-solid electrolytes and catalyst inks ● Part 1) Cost reduction of LIB electrode slurry for automotive applications using the NEW-CDM process and improved Filmix® for electrolyte dispersion technology for all-solid batteries ● Part 2) Latest examples of ink dispersion adjustment technology for PEFC electrodes ◇ International Secondary Battery Expo PRIMIX Booth: West Hall 1, 1st Floor W6-18 *An invitation ticket is required to enter the exhibition venue. If you would like an invitation ticket, please let us know the number of tickets you need using the contact form below. We look forward to your visit.

Primix Co., Ltd., a manufacturer of high-speed stirrers (Headquarters: Awaji City, Hyogo Prefecture, President: Naoki Furuichi), will exhibit at the 10th International Secondary Battery Expo (commonly known as Battery Japan) to be held at Tokyo Big Sight from February 27 to March 1. We will also hold a free seminar on dispersion technology at the venue. We look forward to welcoming everyone involved in the manufacturing and research and development of secondary batteries. ◇ Product and Technology Seminar by Exhibitors [Free Admission] Date and Time: February 27, 2019 (Wednesday) 13:40–14:40 Speakers: Tsukasa Ohata and Takayuki Wani from Primix Battery Device Division PEACE Presentation Content: ■ Introduction of new CDM electrode slurry process for LIB and dispersion technology for all-solid electrolytes and catalyst inks ● Part 1) Low-cost NEW-CDM process for vehicle LIB electrode slurry and dispersion technology for all-solid battery electrolytes using improved Filmix(R) ● Part 2) Latest examples of ink dispersion adjustment technology for PEFC electrodes ◇ International Secondary Battery Expo PRIMIX Booth: West Hall 1, 1st Floor W6-18 *An invitation ticket is required to enter the exhibition venue. If you would like an invitation ticket, please let us know the number of tickets you need via the contact form below. We look forward to your visit.