ラサ工業 Official site

Download PDF Contact Us
  • EVENT

*New Special Price* Connector product for powder and bulk materials 'BFM Fitting'

ラサ工業

ラサ工業

- New Purchase Campaign Now Underway - Shoot piping can be attached and detached without tools. Connection points can be securely sealed, preventing powder leakage and accumulation. 【New Purchase Discount Campaign Now Underway】 This offer is available only to new purchasers, providing a "first-time set discount price"! Additionally, for six months after purchase, a "20-30% discount" will be applied to any additional purchases! Please feel free to contact us for more details. 'BFM Fitting' is a connector product that allows for the attachment and detachment of shoot piping without tools, contributing to the prevention of powder material leakage with its high sealing capability. It demonstrates excellent sealing performance even under high-pressure conditions of 60 kPa, and its superior material strength makes it resistant to tearing and detachment.

Related product information

  • *New Special Price* Connector Product for Powder and Granular Materials 'BFM Fitting'

    - New Purchase Campaign Ongoing - The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation.

    【System of the Product】 ◎ Consists of two spigots (or flanges) welded to the piping and a snap-fit flexible connector. ◎ The stainless steel spigot comes with a 52mm long "tail" that can be cut to fit existing piping. ◎ The lengths of the pipe and spigot can be adjusted to fit within the installation gap. ◎ The installation gap is always slightly smaller than the actual length of the connector, making it easy to replace or move the connector. *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

  • Transparent connector with electrostatic discharge protection specifications 'Seeflex 040AS'

    This is a specification made of transparent thermoplastic polyurethane, suitable for use in environments where static electricity is a concern.

    【Material Properties (Partial)】 ■Surface Finish: Matte/Matte ■Hardness (Shore A): 90 ■Thickness (+/-10%): 0.9mm/1/32inch ■Tensile Strength (MPa): 37 ■Usable Temperature Range 　・-25 to 95℃ 　・-13 to 203°F ■Maximum Instantaneous Use Temperature: 100℃/212°F *For more details, please refer to the PDF document or feel free to contact us.

  • Powder and bulk material connector product 'BFM Fitting' <Demo units available for loan>

    The shoot piping can be attached and detached without tools. It seals the connection points securely, preventing powder leakage and accumulation. A product introduction video is currently available.

    【System of the Product】 ◎ Consists of two spigots (or flanges) welded to the piping and a snap-fit flexible connector. ◎ The stainless steel spigot comes with a 52mm "tail" that can be cut to fit existing piping. ◎ The lengths of the pipe and spigot can be adjusted to fit within the installation gap. ◎ The installation gap is always slightly smaller than the actual length of the connector, making it easy to replace or relocate the connector. *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

  • No powder leakage, no powder accumulation - "BFM(R) Bag Loader for FIBC"

    This is a bag loader for filling bulk bags that can be used regardless of the presence of an inner liner.

    【Material Properties (Excerpt)】 ■Surface Finish: Gloss/Gloss ■Usable Temperature Range: -25 to 110℃ ■Hardness (Shore A): 90 ■Tensile Strength (MPa): 40 ■Permissible Elongation (%): 593 ■Permeability: 0 *For more details, please refer to the PDF document or feel free to contact us.

  • "Blanking Caps" that prevent contamination and foreign matter intrusion.

    The cap is made of high-durability transparent thermoplastic polyurethane, preventing contamination and foreign matter intrusion.

    【Material Properties】 ■Surface Finish: Gloss/Gloss ■Hardness (Shore A): 90 ■Thickness: 0.9mm/1/32 inch ■Usable Temperature Range 　・-25 to 110℃ 　・-13 to 230°F ■Maximum Instantaneous Use Temperature: 120℃/248°F ■Breathability: 0 *For more details, please refer to the PDF document or feel free to contact us.

  • Lightweight transparent thin connector 'Seeflex 020E'

    Made of lightweight transparent thermoplastic polyurethane, it is ideal for equipment such as measuring instruments.

    【Material Properties (Partial)】 ■Surface Finish: Gloss/Gloss ■Hardness (Shore A): 90 ■Thickness (+/-10%): 0.35mm/1/64inch ■Tensile Strength (MPa): 78 ■Usable Temperature Range 　・25 to 80℃ 　・-13 to 176°F ■Maximum Instantaneous Use Temperature: 100℃/212°F *For more details, please refer to the PDF document or feel free to contact us.

  • FM1 Breather, a component suitable for air bleeding in intake and exhaust systems.

    These are exhaust and intake parts made of 100% polyester felt suitable for breathable applications.

    【Material Characteristics (Partial)】 ■ Fiber: Made of polyester, multi-fiber needle felt ■ Composition/Finish: Heat set finish, surface baked super glaze ■ Color: White ■ Thickness: 1.7mm/1/16 inch ■ Maximum usable temperature: 130℃/266°F ■ Instant maximum usable temperature: 150℃/302°F *For more details, please refer to the PDF document or feel free to contact us.

  • Connector 'LM3' designed for sub-zero temperature environments.

    It is made of woven fabric material that is optimal for use in low-temperature environments down to -70°C.

    【Material Characteristics (Part)】 ■Fiber: 100% Polypropylene ■Color: White ■Composition/Finish: Multi-fiber twill fabric, heat set finish ■Usable Temperature Range 　・-70 to 94℃ 　・-94 to 201°F ■Instant Maximum Usage Temperature: 107℃/225°F *For more details, please refer to the PDF document or feel free to contact us.

  • Transparent 'Seeflex 060ES' with enhanced positive pressure durability.

    This is a strong pressure-resistant specification with a polyester lining inserted into transparent thermoplastic polyurethane.

    【Material Properties (Part)】 ■Base Material: Thermoplastic Polyurethane Compound ■Lining: Polyester ■Thickness (+/-10%): 1.3mm/3/64" ■Tensile Strength (MPa): 47 ■Tear Strength (MPa): 111 ■Maximum Usable Temperature: 120℃/248°F *For more details, please refer to the PDF document or feel free to contact us.

  • Eliminate powder leakage and powder accumulation. Standard 'Seeflex 040E'.

    It is a flexible connector made of transparent thermoplastic polyurethane, designed for CIP cleaning.

    【Material Properties (Partial)】 ■Surface Finish: Gloss/Gloss ■Hardness (Shore A): 90 ■Thickness (+/-10%): 0.9mm/1/32 inch ■Tensile Strength (MPa): 40 ■Usable Temperature Range 　・-25 to 110℃ 　・-13 to 230°F ■Maximum Instantaneous Use Temperature: 120℃/248°F *For more details, please refer to the PDF document or feel free to contact us.

  • Connector 'LM4' designed for high-temperature environments.

    It is made of woven fabric material suitable for use in high-temperature environments up to 130℃.

    【Material Characteristics (Partial)】 ■Fiber: 100% Polyester ■Color: White ■Composition/Finish: Multi-fiber plain weave fabric, glossy finish ■Weight: 393g/m2 11.6oz/yd2 ■Maximum Usable Temperature: 130℃/266°F ■Instant Maximum Usable Temperature: 150℃/302°F *For more details, please refer to the PDF document or feel free to contact us.

  • PTFE connector with visible interior【Teflex NP Opaque】

    Maintains high flexibility down to -73℃ (-99°F)! Designed to dissipate static charges.

    【Material Properties (Partial)】 ■Fiber: Pure PTFE (Teflon) ■Color: Translucent white ■Composition/Finish: Multi-layer film ■Weight: 458g/m2 13.5oz/yd2 ■Thickness: 0.23mm/1/64" ■Usable Temperature Range 　・-73 to 300℃ 　・-99 to 572°F ■Maximum Instantaneous Use Temperature: 316℃/600°F *For more details, please refer to the PDF document or feel free to contact us.

  • "Teflex NP Black" with wide temperature range resistance and high corrosion resistance.

    Compliant with FDA and EU standards! Can be used without being affected by corrosive and acidic products.

    【Material Properties (Part)】 ■Fiber: Pure PTFE (Teflon) ■Color: Black ■Composition/Finish: Film Coated ■Weight: 459g/m2 13.5oz/yd2 ■Thickness: 0.23mm/1/64" ■Usable Temperature Range 　・-73 to 300℃ 　・-99 to 572°F *For more details, please refer to the PDF document or feel free to contact us.

Return to news list