Serial Bluetooth conversion master side connection DTE side
RS-BT62M RS-232C Bluetooth Serial Conversion Unit Master Mode Type DTE Side Mounted
This product is a serial conversion adapter that can connect to devices with RS-232C host ports (DTE side), such as PLCs from various manufacturers and the WD PRO from Patlite, enabling wireless communication via Bluetooth. It is equipped with a female terminal, allowing direct connection to host ports with male connectors. The locking mechanism is compatible with both the screw side and the post side. Communication is possible with Bluetooth-compatible barcode readers or serial devices connected to the RS-BT62 (sold separately) on the other side. Please also refer to the set product 【RS-BT62CR】, which includes the RS-BT62M (this product) and the RS-BT62 (device side). The power supply can be provided by the AC adapter (included as standard) or can be received from the serial device side via the D-SUB9 pin. Additionally, when powered by the AC adapter, power output (5V) is available from the D-SUB9 pin, which can be used as the power supply for the serial device side.
basic information
■Bluetooth Version 4.2 compliant with BR/EDR. Supports Class 2. Communication is possible at a distance of approximately 10 meters. ■Supports serial communication speeds from 1200 bps to 230,400 bps. Data length supports 7/8 bits. Flow control is compatible with CTS/RTS control. ■The power supply for this product can be obtained via an AC adapter (included as standard) or through the D-Sub 9-pin connector (5V to 12V). *The previous model 'REX-BT60' only supports 5V. ■Additionally, when powered by the AC adapter, it can supply power to external devices via the D-Sub 9-pin connector (5V). ■Equipped with a D-Sub 9-pin female connector and screw lock fixing hardware. ■Unit size is approximately 73.8mm x 35mm x 16mm, weighing about 28g (main unit only), featuring a compact design. Only has a built-in antenna. ■Signals DTR/DSR/CDC/RI are not supported. Serial devices such as modems that use these signals cannot be used. ■The Bluetooth device address to connect to can be set and saved in this product. When powered on, it will automatically connect if the other device is active.
Price information
Standard price: ¥29,800 (excluding tax)
Price range
P2
Delivery Time
P3
Applications/Examples of results
This is a serial conversion adapter that connects to devices with an RS-232C host port (DTE side), such as an RS-232C interface added to a PLC or a Patlite WD PRO, and converts the signal to Bluetooth. It is equipped with a female terminal, allowing direct connection to a host port with a male connector. The locking mechanism is compatible with both the screw side and the post side. On the other side, it can communicate with Bluetooth-compatible barcode readers or serial devices connected with RS-BT62 (sold separately). The Bluetooth address of the counterpart can be registered. When this product is powered on, it searches for the registered Bluetooth devices. The power supply can be provided by an AC adapter (included as standard), or it can also be supplied from the serial device side via the D-SUB9 pin. Additionally, when powered by the AC adapter, power output (5V) is available from the D-SUB9 pin, which can be used as a power supply for the serial device side.
