Are you properly implementing safety measures for the working environment, such as electricity, gas, proximity detection and speed monitoring, and heatstroke? Accident prevention and safety measures in the workplace cannot be overlooked in any setting. This document introduces four common risks in the manufacturing industry and equipment that can help with safety measures. It also includes information on "heatstroke," which requires attention during the upcoming season. Please use this to review your workplace environment. [Contents] ■ Risks lurking in workplaces dealing with electricity and the importance of quantifying electricity ■ Risks in workplaces where gas is generated and methods to detect danger early ■ Accident risks from contact, being caught, collisions, and ways to proceed safely with work ■ The danger of heatstroke that can occur indoors and the heat index you should know ■ Introduction of measuring instruments necessary for each safety measure For more details, please obtain the materials from the "Related Catalog" below.

Free comprehensive catalog of infrastructure maintenance and management-related equipment and measurement equipment rentals! It includes many items such as industrial endoscopes, ultrasonic thickness gauges, and flaw detectors under "non-destructive testing equipment," as well as rebar inspection devices and concrete hammers under "concrete structure diagnostic equipment." [Featured Products] [Non-Destructive Testing Equipment] - Industrial Endoscope - Ultrasonic Thickness Gauge - Flaw Detector [Concrete Structure Diagnostic Equipment] - Rebar Inspection Device For more details, please obtain the materials from the "Related Catalog" below.

The portable welding inspection system 'Wiki-Scan (SERVO-ROBOT Inc)' is a welding quality management system that ensures the reliability of the welding process and accurately inspects the pre-weld joint preparation and the weld bead. It proposes to eliminate unnecessary inspection actions, avoid unnecessary repairs, and reduce excessive welding, thereby shortening inspection time and cutting costs. Additionally, it enables efficient data management and quality control. 【Features】 ■ Accurately measures from leg length to undercut ■ Automatically compares with set tolerances and provides feedback ■ Accurately measures root spacing, gaps, misalignment, and bevel angles ■ Pre-weld joint inspection is also possible ■ NETIS registration number: CB-130003-VE *For more details, please refer to the catalog below. Feel free to contact us with any inquiries.

The portable welding inspection system 'Wiki-Scan (SERVO-ROBOT Inc)' ensures the reliability of the welding process and accurately inspects the pre-weld joint preparation and the weld bead as part of a welding quality management system. It proposes eliminating unnecessary inspection actions, unnecessary repairs, and excessive welding, thereby reducing inspection time and costs. Additionally, it enables efficient data management and quality control. 【Features】 ■ Accurately measures from leg length to undercut ■ Automatically compares with set tolerances and provides feedback ■ Accurately measures root spacing, gaps, misalignment, and bevel angles ■ Pre-weld joint inspection is also possible ■ NETIS registration number: CB-130003-VE *For more details, please refer to the catalog below. Feel free to contact us with any inquiries.

Real-time monitoring of tide levels and water levels at remote locations!! This system uses a wireless modem to transmit tide level data measured at the measurement station to confirmation locations such as workboats and offices, enabling real-time monitoring of tide levels. As we enter the rainy season and early summer, this is a product we are currently receiving many inquiries about. For more details, please refer to the free "related catalog" below. *Feel free to contact us with any inquiries.

The component analysis meter is a non-destructive testing device that detects and analyzes specific components contained in a subject. Its compact body is designed with ease of use in mind, and it excels in analysis speed and display functionality. It is available in a series tailored to various subjects, from soil to metals. 【Types】 Soil Metal Alloy / Precious Metal 【Examples of Use】 PMI (Material verification of plant equipment) Identification of steel types in recycled metals Quality control before product shipment or upon material receipt, etc. For more details, you can obtain documents from the "Related Links" below.

There are many opportunities to use industrial endoscopes (fiber scopes) for inspections and diagnostics inside pipes and equipment. In recent years, a variety of high-performance models have emerged to meet demand, but have you ever wondered, "Which one fits our needs...?" This document provides basic knowledge about industrial endoscopes, recommended models, and includes a quick reference table for camera diameter and cable length to help you easily find the appropriate model. It is an original document packed with our company's know-how that you can only obtain here. For more details, you can download the document from the 'PDF Download' link below. [Document Contents] ■ What is an industrial endoscope? ■ Differences between industrial endoscopes and pipe inspection cameras ■ Introduction of four types of equipment ■ Quick reference table for camera diameter and cable length *We have also started handling the new equipment 'Pipe Inspection Camera 3R-FXS07 (100m)'! Please contact us for more details.

"Wiki-Scan" is a welding quality management system that allows for accurate recording simply by holding it over the target area, replacing traditional visual inspection methods. It helps reduce unnecessary repairs and excessive welding, shortens inspection time, and contributes to cost savings. 【Features】 - Capable of accurately measuring from leg length to undercut - Can automatically compare with set tolerance values and provide feedback - Accurately measures root spacing, gaps, misalignment, and bevel angles - Allows for pre-welding groove inspections For more details, please obtain the materials from the "Related Links" below.

It is useful for equipment inspections in factories. Unlike conventional installed flow meters, it is a compact type that is very easy to carry. 【Measurement Targets】 - Liquids containing bubbles - Dirty water, etc. *Liquids without bubbles and clean water (water without any particles mixed in) are not included in the measurement targets. For more details, please visit the site page from the "Related Links" below.

This is an "experiential education" method for on-site safety training using VR. It features 3D visuals that simulate actual work environments. The content not only includes visuals but also conveys sound and vibrations, allowing participants to physically experience and recognize hazards, not just through lectures. [Content Details] *As of December 2021 Circular saw accidents, slate accidents, wire inspections, crane accidents, fall accidents, suspended load operations, gas cutting, public accidents, etc. For more details, please visit the site page from the "Related Links" below.

The yellow body is the trademark. With simple operation buttons, it is capable of measuring straight distance (slope distance), horizontal distance, vertical distance, slope angle, height of the target object, and azimuth angle. 【Main usage examples】 - General construction and electrical work, design, forestry, etc. Measurable distances: - Normal target objects: 0 to 1000.0m (minimum display in 1m increments) - Reflective target objects: 0 to 2000.0m (minimum display in 10cm increments) For more details, please visit the site page from the "Related Links" below.

Weighing capacity (g): 6200 Minimum display (g): 0.01 It also features a piece counting mode. With simple operability, high-precision measurements are possible. In addition, our company offers various models, including those with a minimum display of 0.0001g and those capable of measuring up to 2t. For more details, please visit the site page from the "Related Links" below.

Measuring depth: 2 to 600mm NETIS registration number: CB-160009-VE (as of 2021/11/24) Can be used in any location, whether on walls, floors, or ceilings. By using optional items together, you can further expand the range of applications, such as distinguishing electrical conduits and exploring narrow spaces. 【Examples of use】 - Exploration within concrete (rebar, voids, cracks, etc.) - Building inspections, condition assessments - Electrical conduit exploration (if optional items are included) For more details, please visit the site page from the "Related Links" below.

A wireless type of insulation resistance tester, which is in high demand, has been introduced. By connecting to the dedicated app "GENNECT Cross," data can be transmitted to smartphones and tablets. This significantly improves work efficiency and helps prevent transcription errors and promotes paperless operations. 【Examples of Use Cases】 - Being compact, it can be easily used for measurements in places with frequent movement, such as buildings and factories. For more details, please visit the site page from the "Related Links" below.

This is a newly conceived thermal imaging camera that combines a compact controller like a mobile phone with an angle-free camera head. It can be used in a variety of scenes, such as from above, below, or through gaps. Additionally, it is equipped with user-friendly features like the "Auto Point" function, making it easy for first-time users of thermal imaging cameras to set up and operate. For more details, please visit the site page from the "Related Links" below.

No installation required! Detection range from 0.3m to a maximum of 50m! Just point the camera at the target, and even at a distance of several tens of meters, it can accurately detect compressed air leaks. 【Main usage sites】 Can be used even in noisy manufacturing factories◎ It is effective for regular inspections of pipelines. There is also an introductory video, so please check the URL below for more details.

The maximum measurement depth is approximately 600mm! While inheriting the functions of conventional products, it has become simpler and more functional. It is effective for internal inspection of concrete structures (such as rebar and void locations). Its handy size makes it convenient to carry. For more details, please visit the site page from the "Related Links" below.

It is a gas detector (alarm) capable of detecting 4 components. It can simultaneously measure oxygen, combustible gases (methane), hydrogen sulfide, and carbon monoxide. It is used for safety confirmation on-site in places such as sewage treatment plants, cleaning factories, and various underground operations. For more details, please see the URL below.

One device can measure 13 water quality parameters. It is also highly durable and performs well in various environments. Measurement items: pH, ORP, DO, conductivity, conductivity (25°C converted value)*, salinity*, total dissolved solids (TDS)*, resistivity*, seawater density*, total suspended solids (TSS)*, temperature, turbidity, atmospheric pressure, water depth. For more details, please see the URL below.

What are the revised standard values for dust measurement? We have summarized the points clearly, including the amendments to the "Guidelines for Dust Control in Tunnel and Other Construction Works" revised in April 2021, measurement procedures, and compliant dust measuring devices. For more details, please visit the site page at the URL below.

A 5G analyzer that can complete all necessary equipment with just this one device using GPS and other technologies! It supports a wide range of frequency bands, so please consider it as a go-to device in times of need! For more details, visit the rental site.