レックス Official site

***Features*** - Measurement (General): It can display and record GPS data and depth sounder data, making it useful for tasks such as depth measurement, positioning, and flagging. - Measurement (Survey Line): Used during depth measurement tasks along planned survey lines. Pre-registered survey lines are displayed on the screen, allowing for efficient work by navigating the survey vessel along the displayed survey line. - Reverse Shooting (Guidance): The relative position to a target point, for which coordinates have been pre-registered, is displayed on the screen. By following the screen's instructions while operating the vessel, you can reach the target point. - Record Reproduction: Past recorded data can be graphically displayed just like at the time of measurement. Additionally, in this mode, it is possible to change the display method for antenna height and depth sounder data. - GPS Automatic Setting (Base Station / Mobile Station): GPS settings for use during surveying can be configured from a computer. It is not necessary to have a dedicated controller or program, nor is it required to have extensive knowledge of GPS. - Survey Line Registration: Data for planned survey lines can be registered using X and Y coordinates, and the survey line can be displayed on the screen. It is also possible to swap the starting and ending points. - Reverse Shooting Point Registration: Registers the X and Y coordinates of the reverse shooting point.

***Features*** - Measurement (General): It can display and record GPS data and depth sounder data, making it useful for tasks such as depth measurement, positioning, and flag placement. - Measurement (Survey Line): Used during depth measurement tasks along planned survey lines. Pre-registered survey lines are displayed on the screen, allowing for efficient operations by navigating the survey vessel along the displayed survey line. - Reverse Targeting (Guidance): The relative position to a target point with pre-registered coordinates is displayed on the screen, enabling the operator to reach the target point by following the screen instructions. - Record Reproduction: Past recorded data can be graphically displayed as it was at the time of measurement. Additionally, this mode allows for changes to the display method of antenna height and depth sounder data. - GPS Auto Configuration (Base Station / Mobile Station): The GPS settings used during surveying can be configured from a computer. It is not necessary to have a dedicated controller or program, nor is it required to be knowledgeable about GPS. - Survey Line Registration: Data for planned survey lines can be registered using X and Y coordinates, and the survey line can be displayed on the screen. It is also possible to swap the starting and ending points. - Reverse Target Point Registration: The X and Y coordinates of the reverse target point can be registered.

The rental period varies depending on the equipment used. We will prepare a quotation after listening to your requests.

If you would like instruction on-site, we will arrange a schedule with our staff and provide instruction on your preferred date.

Rex

March 2010 Iwaki Construction Co., Ltd. No. 6-2 for Umidori March 2010 Paul Corporation Shonai Branch March 2010 Machida Construction Co., Ltd. Setouchi Sales Office February 2010 Seibu Gijutsu Co., Ltd. March 2010 Machida Construction Co., Ltd. Setouchi Sales Office February 2010 Toyo Co., Ltd. Order No. 011081 Goyo & Rinkai Nissan Construction Joint Venture February 2010 Iwaki Construction Co., Ltd. Construction No. 63-3 and No. 63-5 at Ukou January 2010 Sendai Engineering Consultant Co., Ltd. January 2010 Nissoku Co., Ltd. Seibu Gijutsu Co., Ltd. December 2009 Graphic Co., Ltd. For Nagano Prefecture, Sendai November 2009 Tack Consultant Co., Ltd. November 2009 Iwaki Construction Co., Ltd. Oura Worksite November 2009 Kanai Measurement Co., Ltd. Joetsu Store