サンギョウサプライ Official site

The magnet rod (magnet bar) contains a high-strength permanent magnet, allowing for the removal of impurities without the need for a power source. It is a magnet designed to remove fine iron powder and metal fragments (magnetic materials) from materials in manufacturing environments. The rectangular magnet rod (magnet bar) has a shape that makes it less likely for materials to accumulate compared to round rods, so when materials tend to accumulate with round magnet bars, it may be changed to a rectangular shape to reduce accumulation. The rectangular magnet bar (magnet rod) can: - Strongly attract and remove fine iron powder with a maximum surface magnetic flux density of 300mT to 1,000mT. - Be manufactured in lengths from 70mm to 2,500mm in 1mm increments. - Have end processing options including no holes at both ends, tapping on one side or both ends, with tap sizes of M5, M6, M8, M10, M12, and adjustable tap depths. - Be recommended for use at temperatures below 80°C. - Have an exterior made of stainless steel SUS304. - Have handles, grips, eye bolts, and fittings attached. - Be assembled into a lattice-type magnet using multiple rods, not just individual rectangular rods. We can provide magnet rods that cater to various customer needs. Please feel free to contact us.

The magnet rod (magnet bar) contains a high-strength permanent magnet, allowing for the removal of impurities without the need for a power source. It is a magnet designed to remove fine iron powder and metal fragments (magnetic materials) from materials in manufacturing sites. The rectangular magnet rod (magnet bar) has a shape that makes it less likely for materials to accumulate compared to a round rod, so when materials tend to accumulate with the round magnet bar, it may be changed to the less accumulative rectangular shape. The rectangular magnet bar (magnet rod) can: - Strongly attract and remove fine iron powder with a maximum surface magnetic flux density of 300mT to 1,000mT. - Be manufactured in lengths from 70mm to 2,500mm in 1mm increments. - Have processing on both ends, including no holes, single-side or both-end tapping, with options for M5, M6, M8, M10, M12, and adjustable tap depth. - Be used at a recommended temperature of 80°C or lower. - Have an exterior made of SUS304 stainless steel. - Have handles, grips, eye bolts, and fittings attached. - Be assembled into a lattice-type magnet using multiple rods, not just individual rectangular rods. We can provide magnet rods that cater to various customer needs. Please feel free to contact us.

P1

P3

Magnet rods (magnet bars) are equipped with high-power permanent magnets, allowing for the removal of impurities without the need for a power source. These magnets are designed to remove fine iron powder and metal fragments (magnetic materials) from materials in manufacturing environments. The rectangular shape of the magnet rod (magnet bar) is less likely to cause material accumulation compared to round rods, so when materials tend to accumulate with round magnet bars, it may be changed to the less accumulative rectangular type. Rectangular magnet bars (magnet rods) can: - Strongly attract and remove fine iron powder with a maximum surface magnetic flux density of 300mT to 1,000mT. - Be manufactured in lengths ranging from 70mm to 2,500mm in 1mm increments. - Have end processing options including no holes at both ends, tapping on one side or both ends, with tap sizes of M5, M6, M8, M10, M12, and adjustable tap depth. - Be recommended for use at temperatures below 80°C. - Feature an exterior made of stainless steel SUS304. - Allow for the attachment of handles, grips, eye bolts, and fittings. - Be assembled into a lattice-type magnet using multiple rods, not just individual rectangular rods. We can provide magnet rods that cater to various customer needs. Please feel free to contact us.