SANKO ELECTRONIC LABORATORY CO.,LTD. Official site

Portable probe-integrated film thickness gauge

For more details, please refer to the PDF document or feel free to contact us.

Probe-integrated model for iron base only.

■Dedicated model for iron base ■Successor to UNIBOY-M *For more details, please refer to the PDF document or feel free to contact us.

Measuring the coating thickness on metal and non-metal substrates.

Measurement Method: Ultrasonic Echo Reflection Method Measurement Range: 10 to 7500μm (when sound speed is 2375m/s) LCD Display: 160×160 pixels, with backlight Minimum Measurement Area: 11mm Minimum Resolution: 0.1μm Measurement Accuracy: ±(1μm + 1% of reading) Additional Features: Memory function, statistical calculation function Measurement Value Memory: Approximately 250,000 points (total) Data Output: IrDA 1.0 (optional: USB, RS-232) Operating Temperature: 5 to 50°C (must not condense) Power Supply: 4 AA batteries Dimensions: Main Unit 89 (W) × 153 (H) × 32 (D) mm Sensor φ25 × 60mm Weight: Main Unit 310g, Sensor 80g

You can easily and quickly check the feasibility of anti-corrosion coatings for bridges, ships, steel towers, plants, etc. (in accordance with JIS Z 0313) PSPC compliant.

- The surface salinity concentration is directly read in three ways: water-soluble salinity concentration display, sodium chloride concentration display, and electrical conductivity display. - By fixing the measurement cell to the measurement target and simply injecting the measurement water (pure water), the surface salinity concentration can be measured. - Unlike the press method, it does not dirty the surface with adhesives (the measurement object is a magnetic flat plate).

Display the quantity of "appearance" quantitatively.

〇 Display Method: 2.4-inch LCD digital QVGA color TFT, 320×240 pixels 〇 Measurement Range: 60°: 0-1000 GU (SG-6), (SG-268); 20°: 0-2000 GU, 85°: 0-160 GU (SG-268) 〇 Measurement Target Dimensions: 60°: 8×16 mm (SG-6), (SG-268); 20°: 10×10 mm, 85°: 4×55 mm (SG-268) 〇 Reproducibility: ±0.2 GU (0–10 GU); ±0.5 GU (10–100 GU); ±0.5 GU (100–2000 GU) 〇 Power Supply: 2 AA batteries (1.5V) (approximately 50,000 measurements possible) USB (connect to PC) 〇 Memory: Up to 2,500 batches, 40,000 reading values 〇 Operating Temperature Range: -10 to 50°C, relative humidity 0 to 85% 〇 Dimensions and Weight: 155 (W) × 68 (H) × 50 (D) mm, 534 g (including batteries) 〇 Accessories: Calibration standard plate, wrist strap, storage case, (for model 268 only; SANKO_LINK software, USB cable)

Coating hardness and adhesion strength evaluation testing device

Load on the coating: 750g Scratch angle: 45 degrees Pencil rotation (notch type): 120 degrees × 3 Dimensions and weight: 120(W) × 120(H) × 100(D) mm, approximately 2kg Accessories: Pencils 9H to 6B, sandpaper #1000, level, parallel jig, dedicated pencil sharpener, storage case