Cross-flow flat membrane testing device 'SEPA CF II'
Supports various membrane types with a small amount of samples. Achieves tests close to actual machines using a cross-flow method!
The "SEPA CF II" is a cross-flow flat membrane testing device that can conduct tests with a small amount of sample liquid. It comes with a variety of flat membranes and spacers, allowing for the testing of RO membranes, NF membranes, UF membranes, and MF membranes under various operating conditions from low to high pressure. With simple operation, it can obtain data useful for scale-up. It is available as a unit and can accommodate specification changes such as piping materials. 【Features】 ■ Contributes to simplifying work and reducing costs ■ Suitable for small starts due to lower initial costs ■ Immediate evaluation and experimentation possible with unit provision ■ Usable with flat membranes of 19cm x 14cm (effective membrane area of 140cm²) ■ Active in research and development departments for chemicals, food, pharmaceuticals, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.
basic information
【Used in such examinations】 ◎ RO Desalination of brine, seawater desalination, removal of silica, concentration of soft drinks, concentration of raw milk, etc. ◎ NF Purification of sugars, concentration of sugars, purification of dyes, separation of amino acids, wastewater treatment in paper manufacturing and spinning industries, etc. ◎ UF Removal of pigments, recovery of paints, purification of gelatin and enzymes, removal of dyes, oil-water separation, concentration of raw milk, etc. ◎ MF Pretreatment for RO/NF, purification of enzymes, fractionation of proteins, etc. *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Price range
Delivery Time
Applications/Examples of results
*For more details, please refer to the materials. Feel free to contact us as well.*
Detailed information
catalog（1）
Download All Catalogs
News about this product（2）
-
For the production of original equipment without waste! Featured flexible pipe system for assembly.
When introducing equipment, especially for small items in factories, there are not many sites that consider custom-made solutions from the outset. Concerns regarding cost and delivery time are significant, and when developing and designing a product, the cost per unit inevitably becomes higher than that of standard products. Nevertheless, there are several advantages to creating custom-made equipment, such as: - Optimization of operational efficiency - Ensuring durability and longevity through appropriate material selection - Improved safety through customization ★ We are currently offering a collection of sample works! Jaloc has a proven track record of delivering custom-made carts, chutes, and racks using original pipe and joint parts in response to such requests for many years. With the motto "Turning your ideas into shape," we welcome consultations from the conceptual stage. Even if you cannot draw plans, our staff can create drawings based on your images or rough sketches and provide proposals, so please feel free to contact us.
-
Case Study 2 of the Pipe Joint System "NICO" Utilization within JALOC Company
Introducing the second installment of a series showcasing how the pipe joint system "NICO," which allows for the free assembly of various improvement tools, is utilized within JALOC! (You can check the first installment via the "Related Links" below.) This time, we are introducing a stand for a cutting machine. It is a machine that cuts multiple stacked sheets of paper electrically, but it is so heavy that it requires 2 to 3 people to lift, and its large size makes it difficult to find a place for it. To improve this, we created this stand. Considering room rearrangements, we equipped it with casters that have stoppers so that it can be moved by one person. The stand part uses 12mm thick particle board to ensure stable placement on flat surfaces. It has a three-tier structure to accommodate other items, and we reinforced it by distributing more pipes to ensure it can safely hold the heavy cutting machine. We look forward to sharing the next case study with you! On our online store, we feature a column showcasing the two new employees at JALOC as they go through the process of conceptualizing and assembling NICO items. Please take a look!
-
[Online Store] Product Column "NICO Production Experience 1: From Concept to Pochi Drawing Creation" Updated
We have updated the product column page on the JALOC online store. The "NICO Series," a pipe joint system that allows you to freely assemble "Kaizen" tools useful in various manufacturing sites, is reported by two new employees of JALOC who experienced the process from concept to completion and improvement, titled "NICO Manufacturing Experience." This is the first installment, covering the concept to the creation of the punch drawing. We believe it will be helpful for customers considering purchasing the NICO Series, so please take a look.
-
We will be exhibiting at JIMTOF2024. We look forward to your visit!
We are pleased to announce that our company will be exhibiting at the 【JIMTOF2024 32nd Japan International Machine Tool Fair】! We look forward to welcoming you to our booth, which we have focused on designing more than ever before. ~ Exhibits (planned) ~ ・HydraCell pumps by Wanner Engineering 【Model G10】 【Model G03】 【Replacement parts kit】 【Various relief valves】 Below are the details of the exhibition. ■ Dates: November 5 (Tuesday) to November 10 (Sunday), 2024, 9:00 AM to 5:00 PM * The opening hours may vary by exhibition hall. * The closing time on the final day is different. ■ Venue: Tokyo Big Sight (Tokyo International Exhibition Center) ■ Booth Number: West Hall 4 【W4064】 ■ Admission Fee: Free. Registration required. ■ Note: For more details, please refer to the official JIMTOF2024 website. A booth map is included in the attached file at the bottom of the page. We look forward to seeing you there!
-
We will be exhibiting at Inter Aqua 2024. We look forward to your visit!
We are pleased to announce that our company will be exhibiting at "Inter Aqua 2024"! This time, we will be exhibiting in collaboration with our group company, "Nihon Abco Co., Ltd." The items on display are expected to be the largest selection we have ever showcased at an exhibition. ~ Exhibits (tentative) ~ - Hydra Cell Pump Model G10 by Wanner Engineering - High-pressure pump Model T100 for large flow liquid transfer - Couplings for piping connections - Pressure vessels for spiral membranes - Test machine Model 1812 by Synder - SEPA CF2 flat membrane test machine - Demo unit for UF oil-water separation device Below are the details of the exhibition: - Dates: January 31 (Wednesday) to February 2 (Friday), 2024, from 10:00 AM to 5:00 PM - Venue: Tokyo Big Sight (Tokyo International Exhibition Center) - Booth Number: East Hall 7 [7LL-18] - Admission Fee: Free. Registration required. - Notes: For more details, please refer to the official Inter Aqua 2024 website. A booth map is attached at the bottom of the page. We look forward to seeing you there!
