All Plug MG Type

Rust-free, rot-free, non-degrading, screw-in plug.

last updated Mar 17, 2022

All Plug SPS Type

When struck, it opens up and firmly secures itself: a driven plug.

last updated Mar 17, 2022

All Plug MILT Type

Corrosion-free resin material. Easy-to-install screw-type plug.

last updated Jul 25, 2023

All Plug Bolt AS Type

A screw-type plug bolt that allows for easy attachment and detachment and can be reworked.

last updated Mar 17, 2022

IT hanger IT/IT-S/ITW-S type

The screw body and roll plate have the same diameter, allowing installation to be performed while the mounting object is in place.

last updated Jul 28, 2023

IT Hanger ITL-W/ITL-M Type

ALC panel penetration plate hanger. Achieves stable holding power.

last updated May 22, 2024

Amela Hanger ITA-V / VS / R / RS Type

The roll plate section has a double structure, demonstrating strong holding power! For installation on extruded cement boards and hollow walls.

last updated Jul 28, 2023

Board fastener B type/BS type

Ceiling, for fixing to hollow wall surfaces / areas requiring corrosion resistance.

last updated Jul 27, 2023

Tomera TM type / Board Tap BT/BTP type

Screw-in installation for fixing to hollow wall surfaces / no pre-drilling required.

last updated Jul 27, 2023

Non-destructive testing machine Techno Tester AT-10DII

A lightweight and compact design that can adapt to various site conditions.

last updated Jul 25, 2023

Non-destructive testing machine Techno Tester AT-30DII

Non-destructive testing machine for tensile tests from fully threaded bolts to deformed steel bars.

last updated Jul 25, 2023

Tensile Testing Machine Techno Tester 'RT Series'

Certified by the Japan Architectural Finishing Society! Tensile tests for adhesion and bonding strength. Simultaneous measurement of load and displacement!

last updated Mar 17, 2022

D Muscle Chuck DCH / Techno Tester Graph・Report

Verification test of irregular-shaped rebar / TechnoTester measurement support software

last updated Jul 25, 2023

Non-destructive simple type tester Techno Tester KT-6

Easy verification, ultra-lightweight. Body weight 1.7 kg, maximum load 6 kN.

last updated May 30, 2018

All Core Drill L150 Series

Achieving lightweight design with a simple structure specialized for drilling performance.

last updated Mar 17, 2022

Also, basic anchor AKG-175.

Ideal for installing solar panels! Fixing equipment frames on concrete flat roofs.

last updated Aug 02, 2016

Direct Earth Method D-Earth Screw

The installation of the solar power generation system is speedy! It's reliable in terms of both environmental impact and strength!

last updated Aug 29, 2024

Sanko Techno "Comprehensive Catalog"

Sankotech's comprehensive catalog. It covers all handled products.

last updated Aug 28, 2020

Also, basic anchor (high strength type) "AKH-190(PV)"

Installation of solar power generation systems in equipment and in heavy snowfall areas is now possible!

last updated Aug 02, 2016

Fastener "CD Stud External Screw / Internal Screw"

We also support CD stud welding robots from various manufacturers.

last updated Mar 31, 2016

Sleeve-driven "Metal Lock Anchor ML-D Type"

Tensile performance that reaches the breaking point of anchor bolts! Ensuring construction quality through visual inspection!

last updated May 30, 2018

Metal Safe Anchor SMS-UN/MS-UND Type

Strong against loosening! 'JCAA certified anchor + U-NUT'

last updated Aug 27, 2020

Wide-bottom type "Metal Undercut Anchor"

Precision expansion and post-installed anchors that allow for extraction!

last updated Mar 31, 2022

Instant Welding Method (for fixing insulation materials) 'Insulweld Pin'

Amazing 1/1,000 second welding! Insulation material fixing pins with minimal heat impact on the base material.

last updated Mar 31, 2016

Roof Bolt High-Performance Type "Ultra Tight"

High fastening performance! The truss-shaped cross legs exert force over a wide area on thin steel plates.

last updated May 30, 2018

One-Sided Bolt "Cross Tight" [High fastening strength with installation on one side only!]

A bolt that achieves high fastening strength with installation from one side has arrived! For areas where the back is not visible... where hands can't reach... and where work time is lengthy... perfect for such applications!

last updated Mar 10, 2025

Non-combustible cement-based injection anchor "Seismic Eco Filler"

A non-combustible, cement-based injection anchor that is strong on wet surfaces has arrived! There is less material dripping even when injecting sideways or upwards!

last updated Jan 25, 2021

Sanko-style one-sided bolt "Stratite SH type"

Minister of Land, Infrastructure, Transport and Tourism certified product! This is a one-sided bolt that can be installed from one side.

last updated May 30, 2018

Field tensile testing machine "Techno Tester"

A field testing machine ideal for confirming tensile loads of post-installed anchors and various bolts. The AT series and RT series are registered products certified by the Ministry of Land, Infrastructure, Transport and Tourism!

last updated Jun 07, 2018

Vacuum Drill Bit "Power Q-Jin Drill"

"Shave and inhale, a dust-free site" ◇◆NETIS Registration Number: KT-230285-A◆◇

last updated Feb 14, 2024