星和電機 Official site

This single unit provides reliable lighting for both normal and emergency situations! It is a waterproof emergency lighting fixture with an IP55 protection rating, suitable for outdoor use.

<Features> 1. Contributes to the full LED lighting conversion in industrial areas! This single unit provides reliable lighting for both normal and emergency situations. 2. Brightness assurance through light distribution control allows for a reduction in the number of units installed! In particular, the installation spacing during emergency lighting can be wider than that of existing light sources. 3. The lamp monitor allows you to check the charging status. (Green: Normal, Off: Abnormal) 4. Battery replacement can be done while the fixture is installed. During battery replacement, simply open the battery compartment and remove the connector and screws for easy and quick work. (The lifespan of the rechargeable battery is approximately 4 to 6 years.) 5. The rechargeable battery uses environmentally friendly nickel-hydride batteries. 6. A wide variety of installation options are available. (A total of 160 models) 7. Achieves industry-leading efficiency. In waterproof emergency lighting fixtures, it achieves an industry-leading specific energy consumption efficiency of 142.3 lm/W (VYAA4601). 8. Reliable durability. The cover of the light source section is made of highly impact-resistant polycarbonate resin. It does not easily break compared to fluorescent lamps when subjected to unexpected external impacts. 9. Outdoor specification! Complies with protection grade IP55, allowing safe use even in harsh environments where water and dust are present.

The first in the domestic industry: Emergency LED lighting equipment that can be used in explosion-proof areas. Certified by the Industrial Safety and Technology Association, approved by the Minister of Land, Infrastructure, Transport and Tourism, displaying the JIL mark.

<Features> 1. Achieving all-LED lighting in explosion-proof areas Until now, LED fixtures that could be used in explosion-proof areas were limited to general lighting, and emergency lighting had to use different light sources such as incandescent or fluorescent lamps. With the long-lasting explosion-proof emergency LED fixtures, the need to separately stock replacement lamps for emergency lighting has been almost eliminated, making maintenance management easier. 2. Possible reduction in the number of installed fixtures compared to conventional emergency incandescent lamps The brightness during emergency lighting is approximately four times greater than that of conventional explosion-proof emergency incandescent fixtures (considering maintenance factor), and it is possible to reduce the number of installed fixtures by up to half while ensuring the necessary brightness of 2 lx during evacuation. 3. Charging status can be checked with a lamp monitor Equipped with an environmentally friendly nickel-metal hydride battery. When surrounding lighting fixtures are in regular operation, the lamp monitor (green) of the emergency lighting fixture lights up, indicating a normal charging status. It features a reassuring design that is easy to understand at a glance. 4. Easy battery replacement while the fixture is installed The lifespan of the built-in rechargeable battery is 4 to 6 years. During replacement, the battery compartment can be opened, and by removing the connector and screws, the battery can be easily replaced in a short time.

Contributing to the all-LED lighting in industrial areas! Launching fluorescent lamp alternatives equipped with LED emergency light units and sealed emergency LED lighting fixtures.

<Features> 1. Contributes to the full LED lighting in industrial areas! This unit provides reliable lighting for both normal and emergency situations. 2. Brightness assurance through light distribution control allows for a reduction in the number of installations! Especially during emergency lighting, the installation spacing can be wider than that of existing light sources. 3. The lamp monitor allows you to check the charging status. (Green: Normal, Off: Abnormal) 4. Battery replacement can be done while the fixture is installed. During battery replacement, the battery compartment can be opened, and by removing the connector and screws, the work can be done easily and quickly. (The lifespan of the rechargeable battery is approximately 4 to 6 years.) 5. The rechargeable battery uses environmentally friendly nickel-hydride batteries. 6. A wide variety of mounting options are available. (Total of 20 models) 7. Outdoor specification! Complies with protection rating IP55, allowing safe use even in harsh environments with water and dust. 8. The light source during normal operation is a straight tube LED lamp, which can be replaced. 9. The glass cylinder protects the straight tube LED lamp from dirt, corrosion, and external impacts.