Tunnel LED Basic Lighting Side Wall Mount (BL) Type
LED tunnel lighting (with initial luminous flux correction function) conforms to the LED road and tunnel lighting introduction guidelines (draft) and improves the fixture luminous flux.
The tunnel lighting from Hoshi and Denki adopts long-lasting, high-efficiency white LEDs as the light source, and by incorporating an initial luminous flux correction function, it achieves low maintenance and energy-saving capabilities. ○ It can reduce power consumption and CO2 emissions. ○ Maintenance work that requires traffic regulation can be minimized. It can reduce maintenance work that involves traffic regulation, such as lamp replacement. 1. Long lifespan: 20 years, with only one replacement of the LED and control device; lifespan of 90,000 hours. The LED module has a long lifespan of 90,000 hours, providing over 10 years of maintenance-free operation with 24-hour daily lighting. By coordinating the lifespan of the LED module and control device, only one replacement of both will be needed during 20 years of operation. 2. Lineup: Two types of light distribution and four types of light source capacity. With two types of light distribution and four types of light source capacity, it accommodates a wide range of design speed conditions (40–80 km/h). ■ Ceiling-mounted wide span (CL) …… Two types: LED 50W, 80W ■ Side wall-mounted wide span (BL) …… Four types: LED 40W, 50W, 80W, 100W 3. Supports special dimming: Two-stage dimming capability.
basic information
By adopting a 65% dimming capability, brightness can be reduced even under conditions where dimming was previously impossible, achieving energy savings. ○ Initial luminous flux correction function (our unique feature) The initial luminous flux correction uses a brightness sensor. It corrects the initial excess luminous flux while also compensating (suppressing) fluctuations in luminous flux at low temperatures, further enhancing energy savings. ○ Standard equipped luminous flux decrease alarm function (our unique feature) The initial luminous flux correction unit is equipped with an alarm lamp, which flashes (red high-brightness LED) when the luminous flux (maintenance rate) of the LED module falls below 80%. The alarm function allows for easy identification of the timing for replacing the LED module, improving maintainability and safety. Model: KWLED05005BL-SS-V2 - Luminous flux: 4,720 (lm) - Apparent power (maximum): 48 (VA) - Effective power (average): 41 (W) Model: KWLED10010BL-SS-V2 - Luminous flux: 9,440 (lm) - Apparent power (maximum): 96 (VA) - Effective power (average): 84 (W) Correlated color temperature: 5,000K Average color rendering index: Ra 65 Input voltage: AC 100V to AC 240V
Price range
Delivery Time
Model number/Brand name
KWLED10010BL-SS-V2
Applications/Examples of results
We are being adopted for tunnels on highways and general roads.
Detailed information
Related Videos
catalog（5）
Download All Catalogs
News about this product（2）
-
Lightweight, compact LED tunnel lighting from Seiwa Electric.
Lightweight and compact LED tunnel lighting from Seiwa Electric TALEDA Series NETIS (New Technology Information System) Registration Number TH-150008-A Comparison of Fixture Weight ○ Our LED tunnel lighting Conventional Type 13.8Kg → Approximately 57% weight reduction New Type 6.0Kg Installation work for tunnel lighting fixtures has been challenging until now, but this product is lightweight at approximately 6.0Kg, allowing it to be lifted with one hand. This reduces labor in construction work and shortens installation time, leading to a reduction in installation construction duration. Additionally, by being lightweight and compact, it reduces the load on civil engineering structures. Once installed, the LED tunnel lighting is intended for long-term use. By choosing a product that is even slightly lighter, we contribute to reducing the load on civil engineering structures within tunnels. The product lineup includes basic lighting type, basic lighting with pro-beam distribution type, and entrance lighting. Adoption for newly constructed tunnels, including highways and general roads, as well as replacement of existing tunnel lighting, is progressing. We hope you will consider it.
-
Star and Electric Tunnel Lighting
Tunnel Lighting by Hoshi and Denki Complies with the LED Road and Tunnel Lighting Introduction Guidelines (Draft) LED Basic Lighting Fixtures (with Initial Luminous Flux Correction Function) Six Features of the KWLED Series 1. Long Lifespan: 20 years, with only one replacement of LED and control device; lifespan of 90,000 hours. The LED module has a long lifespan of 90,000 hours, allowing for over 10 years of maintenance-free operation with 24-hour daily lighting. 2. Lineup: Two types of light distribution and four types of light source capacities. With two types of light distribution and four types of light source capacities, it can accommodate a wide range of design speed conditions (40-80 km/h). ■ Ceiling Mount Wide Span (CL) … Two types: LED 50W, 80W ■ Side Wall Mount Wide Span (BL) … Four types: LED 40W, 50W, 80W, 100W 3. Supports Special Dimming: A function made possible by LED; two-step dimming available. By adopting 65% dimming, brightness can be reduced even under conditions where dimming was previously impossible, achieving energy savings. 4. Initial Luminous Flux Correction Function: Our unique feature. 5. Standard Equipped with Luminous Flux Decrease Alarm Function: Our unique feature. 6. Modularization of Component Parts.
