SHOEI MFG.CO.,LTD. Japanese Headquarters Official site

Introducing the latest lineup of hydrogen gas burners and low-carbon equipment! 【Thermal Technology 2024】 (October 10-11, Grand Front Osaka)

【New Development! Hydrogen Gas Burner Lineup】 ◇ Hydrogen Gas Burner for High-Temperature Furnaces (EIS-H2) ◇ Hydrogen Combustion Package Burner (BJ-H2) ◇ Hydrogen Combustion Recuperative Burner (STBW-H2) ◇ Hydrogen Combustion Single-End Radiant Tube Burner (TRFH-H2) ◇ Hydrogen Gas Burner for Hot Air Generators 【Low Carbon Coating Equipment】 Hot Air Generator ◇ Electric Hot Air Generator (AH-E) ◇ Hydrogen Combustion Hot Air Generator (AH-H2) Curing Oven ◇ Electric Hot Air Generator (AH-E) ◇ Hydrogen Combustion Hot Air Generator (AH-H2) ◇ Electric Infrared Heater (Development of hydrogen combustion type is also underway) Deodorization Equipment / Environmental Equipment / VOC Treatment Equipment ◇ Electric Thermal Storage Deodorization Equipment (e-RTO) ◇ Electric Catalytic Deodorization Equipment (e-CT) (Development of hydrogen combustion type is also underway) 【Hydrogen Combustion Aluminum Melting Holding Furnace】 Model: SMH-150H2 Melting Capacity: 150kg/h Melting Burner: Hydrogen Combustion Burner 116kW×1 unit Holding Heater: Immersion Type Electric Heater 9kW×2 units Fuel Used: Hydrogen (City Gas 13A and Propane Gas are also possible.)

Experience the forefront of decarbonization technology, including hydrogen combustion gas burners. Test information is updated daily!

[Test Furnace and Equipment] - Aluminum melting holding furnace (Oxide suppression SMH type) - Painting drying furnace + painting booth (Quick curing oven QCO) - High-temperature test furnace - Open combustion furnace - Direct combustion deodorization device (Mobile demonstration unit) - Combustion equipment for original mixed burner - Radiant tube burner test furnace - Duct combustion burner test device ■ Fuel Supply 13A (45 MJ/㎥): 2.0 to 20 kPa supply Max. 200 ㎥ N/h LPG (100 MJ/㎥): 2.8 to 70 kPa supply Max. 50 ㎥ N/h Hydrogen (12.8 MJ/㎥): Up to 10 kPa supply ■ Test Power Supply Equipment Max. 150 kVA, 200V (Please consult for other voltages, etc.) (Temporary installation of generators with different voltages or frequencies depending on the experimental content) For inquiries regarding testing of combustion equipment and industrial furnaces or the use of demonstration units, please contact us through this page. Shoei Manufacturing Co., Ltd. Thermal Technology Research Institute (within Horyuji Center) Tel. 0743-57-2244 Fax. 0743-57-5711 520 Kasame, Ando-cho, Ikoma-gun, Nara Prefecture 639-1065

Introducing the forefront of development! Hydrogen combustion without carbon dioxide emissions! SHOEI is advancing the hydrogen compatibility of its proven in-house burners.

◇ Hydrogen Gas Burner for High-Temperature Furnaces 【Model】 (Rated Combustion Capacity) EIS-50H2 (58kW) EIS-100H2 (116kW) EIS-200H2 (233kW) 【Applicable Furnaces】 Heat Treatment Furnaces, Melting Furnaces, Holding Furnaces, Heating Furnaces, Plating Furnaces, Hot Air Generators, Drying Furnaces, Deodorizing Devices ◇ Hydrogen Combustion Package Burner 【Model】 (Rated Combustion Capacity) BJ-300H2 (290kW) 【Applicable Furnaces】 Hot Air Generators, Drying Furnaces, Heat Treatment Furnaces, Deodorizing Devices, Heating Furnaces ◇ Hydrogen Combustion Recuperative Burner 【Model】 (Rated Combustion Capacity) STBW-H2 (116kW) 【Applicable Furnaces】 Aluminum Melting Furnaces, Holding Furnaces, Preheating Furnaces, Heat Treatment Furnaces ◇ Hydrogen Combustion Single-End Radiant Tube Burner 【Model】 (Rated Combustion Capacity) TRFH-100A-H2 (12.8kW) 【Applicable Furnaces】 Carburizing Furnaces, Quenching Furnaces, Firing Furnaces, Baking Furnaces, Slow Cooling Furnaces, Nitriding Furnaces, Annealing Furnaces, Tempering Furnaces ◇ Hydrogen Combustion Duct Burner 【Model】 (Rated Combustion Capacity) SDC-10H2 (116kW) SDC-20H2 (233kW) SDC-30H2 (349kW) 【Applicable Furnaces】 Hot Air Generators, Drying Furnaces

In the face of uncertainty regarding future energy supply, we are advancing efforts towards high-efficiency "electrification" and "hybridization" based on gas combustion furnaces.

【Electric Heating Devices】 □ Electric Hot Air Generator (AH-E) 　　Maximum outlet temperature of 250℃. Compatible with replacement from our gas type. □ Electric Infrared Heater (FW Heater) 　　Heater surface temperature up to 800℃, uniformly heating a wide area. □ Electric Heater Type Aluminum Melting Holding Furnace (SEUD) 　　Holding capacity ranges from 500kg to 2000kg. □ Electric Curing Furnace (Curing furnace after resin impregnation treatment of glass tubes for batteries) 　　Improvements in productivity and energy savings achieved through uniform heating and heat exhaust utilization. □ Electric Cure Furnace / Vulcanization Furnace (Heat treatment device for thermosetting and thermoplastic resins) 　　Proposing suitable heating control and transport control. 【Hybrid Heating Devices】 □ Hybrid Aluminum Heat Treatment Furnace 　“High-temperature heating zone with gas burner” 　“Low-temperature heating zone with space-saving, environmentally friendly electric type” □ Hybrid Heating Furnace 　“Heat source for work heating treatment is electric heater” 　“Heat source for deodorization of volatile components is gas burner” □ Hybrid Aluminum Handheld Melting Holding Furnace 【Test Furnace】 　Melting aluminum with “hydrogen burner” 　Holding molten metal with “electric heater” in a practical test furnace.

At Seiei Manufacturing, we are proposing low-carbon painting drying ovens to respond to a decarbonized society.

Our company, the Thermal Technology Research Institute, has prepared a painting drying test furnace (QCO) equipped with a painting booth. You can test a heat source suitable for your work in an environment close to that of an actual furnace. Additionally, you can observe the combustion of a hydrogen gas burner, so please feel free to contact us.

Successful stable combustion of ammonia combustion. Introducing a heat recovery burner with built-in heat exchanger! Contributing to decarbonization and low carbonization in high-temperature fields.

[Under Development] Model: STBW-NH3 Output: 50kW Fuel Gas: Dedicated to ammonia, dedicated to city gas (13A) Ammonia-city gas co-firing

With a wealth of achievements both domestically and internationally! Achieving high decomposition rates and energy efficiency! We propose suitable environmental equipment for our customers.

**EOCS-US Series (Sterilization Gas Removal Device)** Standard EOG removal rate: Harmless up to a concentration of less than 1 ppm Processing capacity: 100–5000 L/min Processing temperature: 280–350℃ (automatic control) Processing method: Direct combustion type with gas burner + catalytic type Heat source: Gas type (electric type series also available) **CH Series (Direct Combustion Deodorization Device)** Standard VOC removal efficiency: Expected value of over 99% Maximum heat recovery rate: 50% + α (via secondary heat exchanger) Processing capacity: Up to 300 N㎥/min A movable demo unit that can be transported to your factory is available. Testing using actual odors is possible. **R-RTO Series (Rotary Heat Storage Deodorization Device)** Standard VOC removal efficiency: Expected value of over 98% Maximum heat recovery rate: 97% Processing capacity: Up to 1,700 N㎥/min **CT Series (Catalytic Deodorization Device)** Standard VOC removal efficiency: Expected value of over 99% Maximum heat recovery rate: 50% + α (via secondary heat exchanger) Processing capacity: Up to 300 N㎥/min We can design according to your usage conditions, so please feel free to contact us.

A test furnace based on actual equipment that uses a hydrogen burner for melting and an electric heater for holding. It is possible to conduct thorough tests for decarbonization in aluminum casting sites together with our customers!

～Equipment Overview～ Test Furnace: Aluminum Handheld Melting Holding Furnace (Oxide Suppression Structure) Model: SMH-150H2 Melting Capacity: 150kg/h Holding Capacity: Holding Chamber 800kg/ch *Actual effective capacity during continuous melting with a specific gravity of 2.4 Melting Temperature: 660–680℃ Control Accuracy: ±5℃ ～Heat Source Configuration～ Melting Burner: Hydrogen Combustion Burner 116kW × 1 unit Holding Heater: Immersion Type Electric Heater 9kW × 2 units Fuel Used: Hydrogen (City Gas 13A and Propane Gas are also possible.) Power Supply: Power 200V/60Hz, Control 100V