シルサーム・ジャパン Official site

Siltherm Japan exhibited at "Thermotech 2026," held from September 9 to 11, 2026, and conducted a demonstration comparing the insulation performance of a conventional furnace and a Siltherm furnace. With the same outer diameter and insulation thickness of 50mm, only the insulation material was changed to compare the furnace surface temperature and cumulative power consumption. Measurements taken over two days at 600°C showed that the Sltherm furnace reduced cumulative power consumption by approximately 51-53% compared to the conventional furnace, and the maximum surface temperature of the furnace was also reduced from about 93°C to about 48°C. Furthermore, comparisons were made under 700°C conditions, where a larger difference was observed in this demonstration scenario. *The values mentioned are the measurement results under the conditions of this demonstration and may vary depending on usage conditions. Please feel free to consult us regarding insulation improvements, energy saving, and surface temperature reduction for industrial furnaces and heating equipment.

Silsarm Japan will exhibit at "Thermotech 2026," which will be held at Tokyo Big Sight from September 9 (Wednesday) to September 11 (Friday), 2026. At the venue, we will showcase an electric furnace using high-performance insulation material "Silsarm" alongside a standard insulated electric furnace, demonstrating the differences in surface temperature and cumulative power consumption in real-time. In preliminary tests, we have confirmed a reduction in power consumption of over 20% and a clear decrease in surface temperature in the Siltherm furnace. On the day of the event, we will also use thermography to visually demonstrate the differences in insulation performance. ■ Event Dates: September 9 (Wednesday) to September 11 (Friday), 2026 ■ Venue: Tokyo Big Sight, South Hall ■ Booth: Hall S2 P012 We invite you to visit our booth.

We have developed the thinnest 1.2mm thin fire-resistant insulation material for lithium-ion batteries. Its excellent "insulation performance" facilitates heat management within the battery pack, while its "fire resistance" suppresses the spread of flames during thermal runaway, and its "thinness" enhances energy density. Please see the detailed specifications below. https://premium.ipros.jp/siltherm/product/detail/2000905324/?hub=168

Thank you very much for your continued support. We are pleased to announce that our company will be exhibiting at the "International Logistics Comprehensive Exhibition 2023." At our booth, we will introduce Silsaam insulation materials based on the themes listed below. Event Dates: September 13 (Wednesday) to September 15 (Friday), 2023 Venue: Tokyo Big Sight, West Hall Booth: AT-07 (just down the stairs) Exhibition Content: "Silsaam Vacuum Insulation Material" - [Medical, Leisure, Cold Chain] Extended cooling time and improved loading efficiency! "Silsaam-Silshin" - [EV Vehicle, Emergency] Prevention of thermal runaway and improvement of energy density! "Silsaam Insulation Material" - [Heat Resistance 1000°C] Low thermal conductivity insulation material for fuel cost reduction! "Silsaam Fireproof Material" - [Instant 1600°C Heat Resistance] Excellent fireproof material that is thin and lightweight. We apologize for the inconvenience during your busy schedule, but we would be delighted if you could stop by our booth when you visit. ↓↓↓ Visitor registration can be done here ↓↓↓ https://www.logistech-online.com/jp/registration.php?exhibitor=EX000067

We have published energy-saving proposals aimed at achieving carbon neutrality. Please consider them as a way to reduce soaring fuel costs. *For more details, please check the "Related Product Information" below.*