ソマックス Official site

Cleaning of die-cast molds and large mold temperature control and cooling pipes is now possible with SkatS!

The mold temperature control piping cleaning machine "Scat" is suitable for companies that have the following needs: - Companies considering the automation of mold maintenance - Companies wanting to resolve labor shortages - Companies aiming to reduce molding defects - Companies looking to improve the quality of molded products - Companies wanting to easily carry out maintenance of mold temperature control piping

Numerous cases are presented where the flow rate of mold cooling water increased fourfold and the surface temperature was restored to -11°C, dramatically improving the cleaning process!

The mold temperature control piping cleaning machine "Water Reamer" is suitable for companies that have the following needs: - Companies considering the automation of mold maintenance - Companies wanting to resolve labor shortages - Companies aiming to reduce molding defects - Companies looking to improve the quality of molded products - Companies wanting to easily perform maintenance on mold temperature control piping.

A new habit before storing molds!

The concept of "preventive maintenance." Mold temperature control piping cleaning machine "Water Reamer."

Remove and prevent rust accumulated in the mold temperature control piping and cooling pipes to improve cooling efficiency!

The rust removal machine "Water Reamer" for mold temperature control piping is suitable for companies that have the following needs: - Companies that want to reduce molding defects - Companies that want to improve the quality of molded products - Companies that want to easily carry out maintenance on mold temperature control piping.

Dirt that causes shine. With the mold cleaning machine "Kuripika Ace," it can be perfectly removed without any damage!

Cleans and removes mold dirt without damage. - Want to reduce the cost and effort of re-texturing - Want to bring mold maintenance in-house This product is suitable for such companies.

The mold cleaning machine Kripika Ace is effective for removing contaminants like PPS and POM, as well as for eliminating the sticking of release agents!

It cleans and removes dirt from molds that cause poor molding in a short time. This product is suitable for companies that want to improve the quality of mold cleaning while reducing the frequency of cleaning.

Perfectly remove dirt from delicate molds coated with nickel plating using the optical component mold cleaning machine 'Cripika Ace OPT'!

Removes dirt from molds that cause poor molding. Suitable for optical component molds such as light guide plate molds and lens molds. This product is ideal for companies that want to improve the quality of mold cleaning while reducing the frequency of cleaning.

Explaining the know-how of mold maintenance through "manga"! Offering all 10 series for free!

Common mold maintenance issues explained in the manga: - There is a shine on the textured surface of the molded product... - Defective molded products have been produced... - I wonder if the efficiency of maintenance work can be improved... - Maintenance for such small holes seems impossible... - Brass powder is sticking to the molded products... - There are inconsistencies in the molded products... - The percentage of defective products has been increasing... - Using organic solvents for maintenance incurs disposal costs... - Maintenance takes too much time... - How can we train trainees from overseas... *This guide is full of know-how to solve these issues! Please view the PDF data from the download for the "Mold Maintenance Explained in Manga Series."

I have summarized common mistakes in mold cleaning and surprising facts that even the person in charge may not know.

【Contents of Each Brochure】 ■ Is it okay to electrolyze that cleaning solution!? ■ Does that frequency (ultrasound) damage the mold!? ■ The definitive guide to transmittance and brightness recovery! ■ Has the molding shot cycle become longer than when it was new? ■ A dedicated cleaning machine for mold cooling pipes that protects the molding machine: Water Reamer ■ Manifold ■ Crisis management for organic solvents you should know ■ Brass brushes are dangerous! ■ The lifespan of textured molds can be extended! ■ Do you know the secret of textured molding? And more.

The "CPV" type has been introduced in the "Kuripika Ace" series of mold cleaning machines! In addition to the cleaning power of the "CPIII" series, it also supports diversity!

This product quickly cleans and removes dirt from molds that are difficult to remove by hand. It is suitable for companies that want to improve the quality of mold cleaning while reducing the frequency of cleaning. 【Cleaning Examples】 Gas burn on molds Resin stains such as PPS and POM Adhesion of rubber and release agents Light rust, etc.

Increase the operating rate of molding machines! Introducing methods and equipment to significantly reduce maintenance time and molding defects.

In addition to the above products, 【Klipika Ace Series Other Features】 ■ Removes dirt without damaging the mold ■ No organic solvents required ■ No harmful gases are generated, safe for the human body ■ Maintenance is standardized regardless of mold shape or operator skill 【Water Reamer Other Features】 ■ Removes scale deposits while simultaneously forming a rust prevention coating ■ Adopts an air blow drying system ■ Completely closed system, preventing the discharge of rust removal liquid *For more details, please refer to the materials. Feel free to contact us as well.

Wash multiple mold parts at once! Safe and secure mold cleaning without using organic solvents! Free comic materials on the dangers of organic solvents.

It cleans and removes mold dirt that is difficult to remove by hand in a short time. This product is suitable for companies that want to improve the quality of mold cleaning while reducing the number of times it is done. 【Cleaning Examples】 Gas burns on molds, resin dirt such as PPS and POM, adhesion of rubber and release agents, rust and light rust, etc.

A welding machine that does not emit ultraviolet rays or fumes, eliminating the need for protective face shields and masks. It also prevents warping and distortion caused by heat!

The mold repair welding machine "Morhei" is an ideal product for customers who want to perform mold repair welding more easily.