10% rail wear compatible! Long stroke type rail clamp
Rail wear up to 10% (up to a maximum of 12mm) is supported! Can be used for preventing crane runaway. A wide lineup with maximum gripping force from 20 to 120 tons.
The "Rail Clamper" is a safety device that directly secures the rails to prevent outdoor cranes from derailing in strong winds. <Features> ■ Supports rail wear up to 12mm Conventional rail clampers could only accommodate rail side wear of up to 2mm. The long-stroke type can now support rail side wear of up to 12mm (Note 1). Note 1: This applies when the shoe is new. If the shoe wears 1mm on one side, it can accommodate rail wear of up to 10mm. ■ Follows the undulations of the rail in all directions Lateral undulation of the rail: ±30mm Vertical undulation of the rail: ±25mm It can follow within the above ranges. ■ Remote status confirmation via various switches You can remotely check the status of the rail clamper using detection switches for release and temperature switches for hydraulic oil. ■ Compact design with integrated hydraulic unit The hydraulic unit is installed in the main body of the rail clamper, so no separate power source is required. It is also possible to place the hydraulic unit separately if needed. *For more details, please refer to the PDF document or feel free to contact us.
basic information
For more details, please refer to the PDF document or feel free to contact us.
Price range
Delivery Time
Applications/Examples of results
For more details, please refer to the PDF document or feel free to contact us.
