The product page for 【Suntool】 has been newly added with the case study "Hot melt adhesion of paper to display panels"!

サンツール本社

This is an introduction page for the case study of our curtain spray coating equipment. 【Installed System】 Complete curtain spray coating equipment *Maximum coating width of curtain nozzle: 1230mm 【Features】 ■Compatible with adhesives ranging from high viscosity to low viscosity ■Utilizes the cohesive force and viscosity of hot melt (adhesive) to discharge fine fibers, enabling uniform thin film coating *For more details, please download the PDF or feel free to contact us.

Date and time
Capital
Entry fee

Related product information

Non-contact uniform application of hot melt in fibrous form achieved [Curtain Spray]
It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

【Other Features】 ■ Consistent production at our own factory ■ Pre-shipment testing conducted in-house ■ Designed to meet customer specifications ■ Support until the customer begins use *For more details, please refer to the PDF document or feel free to contact us.
Introduction of case studies on solving issues with curtain spray application devices.
This document presents case studies of solutions to challenges related to the "Curtain Spray Coating Device" manufactured and sold by our company.

【Applications/Examples of Achievements】 1. Textile-related (Polyurethane foam/surface material, reactive hot melt) ■ Conventional method: Frame lamination method Concerns about dioxin generation due to work ■ Effects: 1. No dioxin generation 2. Ensures breathability 3. Good texture 2. Building material panel-related (Foamed core material/decorative paper, synthetic rubber-based hot melt) ■ Conventional method: Roll coater application ■ Effects: 1. Reduction in application amount (30g/m² → 15g/m²) 2. Improvement in surface properties 3. Daily necessities-related (Bedding, polyurethane foam/surface material, reactive hot melt) ■ Conventional method: Solvent-based polyurethane adhesive ■ Effects: 1. Solvent-free (dichloromethane) 2. Improved production efficiency (1 night curing → handling after 1 hour)
Spray application of hot melt in fibrous form 【Curtain Spray】
Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

【Variations】 ■Continuous Coating ■Intermittent Coating ■Stripe ■Thin Film Adhesion *For more details, please download the PDF or feel free to contact us.
Hot melt sprayed in fibrous form 【Curtain Spray】
Utilizing the adhesive power (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray coat in a single application over a wide area!

【Variations】 ■Continuous Coating ■Intermittent Coating ■Stripe ■Thin Film Adhesion *For more details, please download the PDF or feel free to contact us.
[Sample available for sending] Can be applied in a fibrous manner without contact [Curtain Spray]
It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and allows for thin application as well!

【Other Features】 ■ Consistent production at our own factory ■ Pre-shipment testing conducted in-house ■ Designed to meet customer specifications ■ Support until the customer starts using the product *For more details, please refer to the PDF document or feel free to contact us.