サンツール 本社 Official site

Introducing Toyo Chem Co., Ltd.'s new product! PUR adhesive!

【Coating Patterns】 - Curtain Spray - Slot Coating - Bead/Dot Application - Foam Application - Spiral Application - Dispenser Coating Device/DP Series *For more details, please refer to the related links or feel free to contact us.

It enables uniform application without seams or unevenness on wide materials that are difficult to spray coat using conventional methods, and it also allows for thin coatings!

【Other Features】 ■ Consistent production at our own factory ■ Pre-shipment testing conducted in-house ■ Designed to meet customer specifications ■ Support until the customer begins use *For more details, please refer to the PDF document or feel free to contact us.

Utilizing the adhesive force (viscosity) of hot melt to extrude fine fibers and uniformly apply them in a non-woven fabric form! It is also possible to spray apply it as a single unit over a wide area!

【Variations】 ■Continuous Coating ■Intermittent Coating ■Stripe ■Thin Film Adhesion *For more details, please download the PDF or feel free to contact us.

Achieve stable precision coating! Line drawing and dot placement pattern formation nozzle.

【Features】 ■ Ideal for line drawing (bead) and dot patterns ■ Capable of multi-line intermittent coating ■ Achieves stable application ■ Coats uniformly and beautifully ■ Reduces product waste ■ Increases productivity ■ Cost-effective *For more details, please download the PDF or feel free to contact us.

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! New adhesive (coating agent).

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control

A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.

Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.

A stable coating method that can be applied non-contact when you want to apply a thin and wide layer for product bonding! Regardless of low or high speed, it achieves minimal splatter and beautiful uniform coating!

【Features of the 2nd Air Nozzle】 ■ Stable pattern with guide air ■ Maintenance significantly reduced due to protection of the nozzle with clean air, preventing foreign matter adhesion ■ Spiral coating of high-viscosity hot melt, which was difficult with conventional methods, is now possible

This document introduces case studies of problem-solving related to the "dispenser coating equipment" that we handle.

■Achievements - Copier parts manufacturing - Flexible packaging - Prototype machine

Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings can be applied by changing the head - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Also available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300)

There are methods for applying with tension between rolls and on-roll application, allowing for continuous/intermittent (partial application) depending on the purpose!

【Features】 ■ Coater head for contact-type application ■ The application pattern can be set arbitrarily based on the shim pattern. ■ Compatible with adhesives from high viscosity to low viscosity ■ Capable of high-speed intermittent adhesion ■ Beautiful coating with thin film adhesion ■ Prevents rolling during coating, and includes measures against clumping of hot melt adhesives (using hot air). *For more details, please download the PDF or feel free to contact us.