サンツール 本社 Official site

This document introduces case studies of problem-solving related to the "dispenser coating equipment" that we handle.

■Achievements - Copier parts manufacturing - Flexible packaging - Prototype machine

This document introduces case studies where the "Foam Melt Device" handled by our company was implemented to solve challenges.

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters depending on the application ■Pump Capacity Selectable from 1cc to 40cc/rev depending on the application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on the installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Unit Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control

A simple and multifunctional small dispenser that allows for the replacement of the head to change various application patterns.

**Features** - Various coatings can be applied by changing the head. - Simple mechanism and maintenance-free. - Enhanced convenience with a wide range of options. - Also prepared for reactive hot melt (DP300P). - Compatible with adhesives from high viscosity to low viscosity. - Commonly used for bonding and filling small boxes. - Systems can also be manufactured for integration with robots. - Weight: 3KG (DP300) *For more details, please download the PDF or feel free to contact us.*

The SA series uses individual temperature controllers! Each point's temperature management is handled by independent PID control temperature controllers.

【Lineup】 ■SA10 ■SA30 ■SA45 ■SA60 ■SA75 ■SA120

This is a compact type melter with a tank capacity of 15/L to 120/L, designed to be smaller compared to conventional tanks!

【Lineup】 ■CV15 ■CV45 ■CV80 ■CV120

The control for the control panel-equipped melter "VH Series (Touch Panel Type)" uses a touch panel system! It reduces current consumption at the start of heating.

【Lineup】 ■VH10 ■VH30 ■VH45 ■VH60 ■VH75 ■VH120 *For more details, please refer to the PDF document or feel free to contact us.

Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.

A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.

A simple and multifunctional small dispenser that allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings can be applied by changing the head - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Also available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300)

Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings can be applied by changing the head - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Also available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300)

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! New adhesive (coating agent).

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control