[New Catalog Release] The English version of the coating equipment "Tank List" catalog has been newly released!

サンツール本社

This is the English version of our company's tank lineup chart. Please take a moment to read it. *For detailed product specifications, please check the product page or feel free to contact us.*

Date and time
Capital
Entry fee

Related product information

Easily adjust the foaming ratio of hot melt! 【Foaming Melt】
The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control
Individual Temperature Control Type Melter [SA Series]
The SA series uses individual temperature controllers! Each point's temperature management is handled by independent PID control temperature controllers.

【Lineup】 ■SA10 ■SA30 ■SA45 ■SA60 ■SA75 ■SA120
Compact design with a reduced size! 【CV Series】
This is a compact type melter with a tank capacity of 15/L to 120/L, designed to be smaller compared to conventional tanks!

【Lineup】 ■CV15 ■CV45 ■CV80 ■CV120
Demo units available for loan! Dispenser coating device [DP Series]
A simple and multifunctional small dispenser that allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings can be applied by changing the head - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Also available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300)
Aluminum cartridge can 300cc
Lightweight and compatible with all hot melt adhesives! Cartridge can for handguns.

【Features】 ■ With plunger and end cap ■ Lightweight ■ Temperature range: 50℃ to 130℃ ■ Cartridge type *For more details, please download the PDF or feel free to contact us.
[Sample available for sending] A melter that allows for easy control of the foaming ratio!
A touch panel type that allows control of the foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.
Easily controllable foam expansion ratio! Foam-compatible type melter.
Touch panel type that allows control of foaming ratio! Discharge in solid state is also possible.

【Lineup】 ■CF08 ■CF30 ■CF60 ■CF120 *For more details, please refer to the PDF document or feel free to contact us.
Dispenser Coating Device [DP Series]
Simple and multifunctional, the small dispenser allows for the replacement of the head to change various application patterns.

【Features】 - Various coatings can be applied by changing the head - Simple mechanism for easy maintenance - Enhanced convenience with a wide range of options - Also available for reactive hot melt (DP300P) - Compatible with adhesives from high viscosity to low viscosity - Commonly used for bonding and filling small boxes - Systems can also be manufactured for integration with robots - Weight: 3KG (DP300)
Reduce current consumption at the start of heating with a two-stage heating method! Control panel with melter.
The control for the control panel-equipped melter "VH Series (Touch Panel Type)" uses a touch panel system! It reduces current consumption at the start of heating.

【Lineup】 ■VH10 ■VH30 ■VH45 ■VH60 ■VH75 ■VH120 *For more details, please refer to the PDF document or feel free to contact us.
Aluminum cartridge can 1000cc
Lightweight and compatible with all hot melt adhesives! Cartridge can for dispensers.

【Features】 ■ With plunger and end cap ■ Lightweight ■ Temperature range: 50℃ to 150℃ ■ Cartridge type *For more details, please download the PDF or feel free to contact us.
Dispenser Coating Device [DP Series]
A simple and multifunctional small dispenser that allows for the replacement of the head to change various application patterns.

**Features** - Various coatings can be applied by changing the head. - Simple mechanism and maintenance-free. - Enhanced convenience with a wide range of options. - Also prepared for reactive hot melt (DP300P). - Compatible with adhesives from high viscosity to low viscosity. - Commonly used for bonding and filling small boxes. - Systems can also be manufactured for integration with robots. - Weight: 3KG (DP300) *For more details, please download the PDF or feel free to contact us.*
Easily adjust the foaming ratio of hot melt! 【Foaming Melt】
The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio! New adhesive (coating agent).

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters according to application ■Pump Capacity Selectable from 1cc to 40cc/rev according to application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control