Achieving 'lightweight' by mixing nitrogen with thermoplastic resin.

The foam applicator contributes to new productivity! The newly designed circulation system stabilizes the foam expansion ratio!

【Features】 ■ Mix nitrogen gas with hot melt adhesive to transform it into foam! ■ The bubbles are independent cells, resulting in low water absorption and improved impact resistance. ■ By entering the desired foaming ratio, anyone can create foam (no complicated operations required). ■ Unique design by Suntool allows switching between foamed and non-foamed states. ■ Newly designed circulation system stabilizes the foaming ratio. ■ In addition to beads, surface coating is also possible, diversifying applications. ■ By foaming the hot melt, it can be applied with less hot melt. ■ Reduces the cost of the hot melt adhesive used. ■ Compatible with adhesives ranging from high viscosity to low viscosity. *For more details, please download the PDF or feel free to contact us. 【Applications/Examples of Achievements】 ■ Building materials ■ Filling for home appliances ■ Sealing ■ Filters ■ Container gaskets

Foam Melt Introduction Page

basic information

【Specifications】 ■Tank Capacity Selectable from 3 to 120 liters depending on the application ■Pump Capacity Selectable from 1cc to 40cc/rev depending on the application ■Hose Selectable from inner diameter φ13 x 1 to 10m depending on the installation location ■Gun Head For beads (various orifice diameters) and for coating (maximum coating width 1000mm) ■Operating Temperature Room temperature to 200℃ ■Foaming Ratio 1.0 to 6.0 times (Note: There are limitations due to hot melt.) ■N2 Gas Generation Device Optional ■Control Panel Functions System temperature control Pump rotation control N2 gas control