I tried changing the layer pitch to challenge myself to reduce the printing time!
[Mitarepo] I want to create 3D printed models as quickly as possible! I challenged myself to shorten the printing time of FDM prints! | System Create
"Mitarepo" is a series that introduces what can be done using various products with the concept of "I tried doing this!" From the wide range of product categories handled by System Create, we deliver useful information each time. In Vol. 56, we challenged ourselves to see how much we could reduce the printing time by changing the layer height for different parts of the model. While utilizing FDM 3D printers, "Everyone must have thought at least once, 'I want to reduce the printing time for 3D printing!'" However, the methods to shorten printing time are limited, and achieving this without compromising quality is quite challenging. This time, we attempted to see how much we could reduce printing time by using the "Anisoprint Composer," which allows for the use of multiple layer heights depending on the part being printed. We will explain the results of our actual printing, along with the printing conditions and photos, to see if we can reduce printing time while maintaining quality. *You can download the materials from the button below.
basic information
■What I tried ■When creating everything with a 0.2mm pitch ■Set the outer perimeter to 0.2mm and the infill section to a 0.4mm pitch ■Very effective for large models and shapes with many supports!
Price range
Delivery Time
Applications/Examples of results
I would be grateful if you could read this as a hint for those who are considering utilizing 3D printers widely.
