All products and services
61～90 item / All 164 items
-
Sarafine [Case Study for a Certain Dairy Manufacturer | Beverage Factory]
For mold and bacteria prevention. Disinfection power greater than sodium hypochlorite solution at a cost of 1/200 of alcohol.
last updated
-
Medication pump "Gas Lockless Sodium Hypochlorite Injection DCLPW・CLPW"
A dedicated machine for injecting sodium hypochlorite with peace of mind. It features an inline automatic air release mechanism and a double block with an air block mechanism!
last updated
-
The rental plan for the lab-use non-pulsating pump "SubscrQ Pump" is now available!
Since its release, the Q Pump, widely adopted for research and development purposes, has launched a "subscription service"!
last updated
-
Slurry Pump "Resin Acid-Resistant Centrifugal Pump MUNSCH"
For the transfer of highly acidic liquids in chemical and steelmaking plants, and for hydrogen production. Acid-resistant slurry pump 'MUNSCH' that is stronger than metal.
last updated
-
Carbon Dioxide pH Neutralization Device "Clean, Safe & Easy to Handle! NAC"
Clean, safe, and easy to handle! Takumina's carbon dioxide pH neutralization device 'NAC'.
last updated
-
[Case Study] Solving the Problem of Frequent Impeller Replacement
Introduction of a case where the pump efficiency is good, and cavitation due to turbulence is less likely to occur!
last updated
-
[Case Study] Achieving significant improvement in the quality of thin film coating and a substantial reduction in wastewater volume.
A uniform coating can now be achieved! Introducing case studies from material manufacturers.
last updated
-
[Example] Continuous spectral measurement for long durations, which was not possible with a syringe pump, is now achievable.
One pump that meets various conditions! Introducing a case study adopted by a private university!
last updated
-
[Case Study] Easy and Accurate Micro Dropping in Synthesis Experiments
We will introduce examples that solve issues such as "syringes are made of glass, making them fragile and difficult to handle."
last updated
-
[Case Study] Improving Workability and Coating Quality for Small-Volume Painting
Measurement and control using flow meters is now possible! We introduce case studies from contract processing manufacturers.
last updated
-
[Case Study] Space-saving Neutralization Treatment of High-Temperature Boiler Drainage
We respond to requests such as wanting to fully entrust to a company with know-how! Here we introduce a case study from a chemical manufacturer.
last updated
-
[Case Study] Continuous Mixing and Coating of Sheet Material Coating Liquid
Improved coating precision and enhanced yield! Introducing case studies from material manufacturers.
last updated
-
[Case Study] Reducing Maintenance Load for High-Temperature Hydrofluoric Acid Transfer Pumps
Troubles such as liquid leakage have been resolved! Introducing a case study from a steel manufacturer.
last updated
-
[Case Study] Supporting Addition, Mixing, and Filtration in the Beer Production Process
We respond to requests such as 'I want to add the specified amount accurately!' Here are examples from sake manufacturers.
last updated
-
[Case Study] Stable Generation of Weakly Acidic Hypochlorous Acid for Thorough Disinfection Throughout the Factory
Solving concerns about maintenance and after-sales service! Introducing case studies of weakly acidic hypochlorous acid water generation devices.
last updated
-
[Case Study] Transporting the flammable chemical butyllithium under high pressure
We have become able to transport liquids safely without leakage! Here is an introduction to a case where we were adopted by a national university.
last updated
-
[Case Study] Improving Quality and Cleanability in the Pigment Dispersion Process
Introduction of a case where high-viscosity liquids were delivered with high precision without a drop in flow rate!
last updated
-
[Case Study] Flow-Proportional Injection in Ballast Water Treatment Systems
Solving the request to inject chemicals into seawater with a ballast water treatment system installed on ships! Introducing case studies from water treatment equipment manufacturers.
last updated
-
[Case Study] Achieving reduced high-pressure injection time and extended lifespan for filter presses.
Solving the issue of pump wear caused by particles in the liquid, which required frequent parts replacement! Introduction of a delivery case.
last updated
-
[Case] Improving the yield of the spray drying process and sharpening the particle size distribution.
Introduction of examples that solved issues such as "the particle size distribution is broad"!
last updated
-
[Case Study] Halving the Electricity Costs of Electrolyte Circulation Pumps
Solving the problem of poor energy efficiency and high electricity costs! Introducing a case study from an aluminum processing manufacturer.
last updated
-
[Case Study] Accurate Management of Residual Chlorine Concentration in Rinsing Water for Bottles
Solving issues such as the inability to accurately measure chlorine concentration! Introducing a case study from a beverage manufacturer.
last updated
-
[Case Study] Balancing Stable Operations During Normal Times and Measures Against Sudden Heavy Rainfall
No stroke length control! Introduction of a case where gas lock no longer occurs even in low flow ranges.
last updated
-
[Case Study] Supporting Long-term Experiments of Over One Month for Culture Medium Injection into Columns
Easy changes to flow rates and calibration operations! Introduction of cases adopted by national universities.
last updated
-
[Case Study] Sharpening Particle Size Distribution through Dispersion Process with Bead Mill
We will introduce a case where the bias of beads can be suppressed, resulting in a sharp particle size distribution!
last updated
-
[Case Study] Safe Long-Distance Transport of Concentrated Sulfuric Acid (98%)
Solving issues such as 'damage caused by corrosion from sulfuric acid without realizing it'! Introducing a case study from a steel manufacturer.
last updated
-
[Case Study] Inline neutralization treatment of 500 tons of rainwater per hour.
We have resolved the request to reuse rainwater on the premises! Here is a case study from a steel manufacturer.
last updated
-
[Case Study] Solving Wear from High-Concentration Slurry and Improving Coating Precision
To solve the challenge of needing to send liquid at a constant flow rate to achieve a uniform coating surface! Here is a case study from an electronic components manufacturer.
last updated
-
[Case Study] Circulation of 75% sulfuric acid at high temperature for an extended period at a constant flow rate.
We have resolved the request to circulate sulfuric acid in the experimental line of the research institute! Here is a case study from a chemical plant manufacturer.
last updated
-
[Case Study] Transferring solvent-based slurry at a flow rate of 50 liters per minute and measuring the flow rate.
We have resolved the request to transfer organic solvents containing micro-particles of a few microns! Here is a case study from a petrochemical manufacturer.
last updated
