多田プラスチック工業 Official site

A new product of the highly acclaimed cardboard cooler box! In addition to outstanding cooling performance, assembly has been simplified! Would you like to achieve eco-friendly and low-cost logistics?

【Specifications】 ■15L Type - Internal dimensions: 250mm (H) × 250mm (W) × 250mm (D) - External dimensions: 300mm (H) × 300mm (W) × 300mm (D) ■36L Type - Internal dimensions: 330mm (H) × 330mm (W) × 330mm (D) - External dimensions: 380mm (H) × 380mm (W) × 380mm (D) *For more details, please refer to the PDF document or feel free to contact us.

R37 type liquid R37_0002A! The rubber parts are mainly made of EPDM.

【Other Specifications】 ■Purpose: Liquid transfer ■Rated Voltage: DC12V ■Flow Rate: 1.1L/min or more ■Current Consumption: 330mA or less when open ■Operating Temperature: 5℃ to 50℃ ■Storage Temperature Range: -10℃ to 50℃ ■Durability: Over 300H ■Operating Noise: 55dB or less ■Body Weight: 110g ■Food Sanitation Act: Compliant *For more details, please refer to the PDF document or feel free to contact us.

Achieving the transportation of large volumes of gas compared to our conventional pumps.

【Other Specifications】 ■ Applicable Fluid: Air ■ Application: Suction / Pressurization ■ Rated Voltage: DC6V ■ Flow Rate: 3.0L/min or more ■ Current Consumption: *When open, 1,000mA or less ■ Vacuum Level: -55kPa or less ■ Maximum Pressure: 80kPa or more ■ Operating Temperature Range: 5°C to 50°C ■ Storage Temperature Range: -10°C to 50°C ■ Durability: (Note 1) 200H or more ■ Operating Noise: 65dB or less ■ Body Weight: 110g *For more details, please refer to the PDF document or feel free to contact us.

For liquids with a flow rate of 3.0L/min or more, and 3.7L/min or more! No shaft seal is required, eliminating concerns about liquid leakage.

【Specifications】 ■CP16P7K12000 　・Rated Voltage: DC12V 　・Flow Rate: 3.7L/min or more 　・Current Consumption: 300mA or less when open 　・Durability Time: 200H or more 　・Operating Environment Range: 5℃ to 50℃ 　・Storage Environment Range: -5℃ to 60℃ 　・Operating Noise: 50dB or less 　・Body Weight: 85g 　・Food Sanitation Act: Compliant ※Durability Test: 10 seconds ON - 2 seconds OFF, total energization time when measuring lift height of 200mm ■CP16B7B24100 　・Rated Voltage: DC24V 　・Flow Rate: 3.0L/min or more 　・Current Consumption: 200mA or less when open 　・Durability Time: 1000H or more 　・Operating Environment Range: 5℃ to 50℃ 　・Storage Environment Range: -10℃ to 50℃ 　・Operating Noise: 50dB or less 　・Body Weight: 60g 　・Food Sanitation Act: Compliant ※Durability Test: 60 seconds ON - 2 seconds OFF, total energization time when measuring lift height of 200mm ※For more details, please refer to the PDF document or feel free to contact us.

By eliminating the axis part, it maintains a consistently clean discharge! It complies with food sanitation laws.

【Specifications】 ■CP16P7K12000 　・Rated Voltage: DC12V 　・Flow Rate: 3.7L/min or more 　・Current Consumption: 300mA or less when open 　・Durability Time: 200H or more 　・Operating Environment Range: 5℃ to 50℃ 　・Storage Environment Range: -5℃ to 60℃ 　・Operating Noise: 50dB or less 　・Body Weight: 85g 　・Food Sanitation Act: Compliant ※Durability Test: 10 seconds ON - 2 seconds OFF, total energization time when measuring lift height of 200mm ■CP16B7B24100 　・Rated Voltage: DC24V 　・Flow Rate: 3.0L/min or more 　・Current Consumption: 200mA or less when open 　・Durability Time: 1000H or more 　・Operating Environment Range: 5℃ to 50℃ 　・Storage Environment Range: -10℃ to 50℃ 　・Operating Noise: 50dB or less 　・Body Weight: 60g 　・Food Sanitation Act: Compliant ※Durability Test: 60 seconds ON - 2 seconds OFF, total energization time when measuring lift height of 200mm ※For more details, please refer to the PDF document or feel free to contact us.

Developing pumps in-house! We respond to various requests with high customization capabilities!

【Lineup】 ■AP-01 ■AP-01BL *For more details, please refer to the PDF document or feel free to contact us.

Automotive parts and robot parts precision injection molding (dimensional tolerance 0.005mm metal alternative)

System 1. Equipment for Constant Temperature and Humidity Environment Aimed at Expanding Precision Molding We create a clean space to prevent foreign matter adhesion. Injection molding machines: 50t to 230t Dimensional tolerance: 0.005mm (up to 0.1 micron level) 2. Quality System IoT implementation in the factory, injection molding tablet management With the tablet, you can check the development status in real-time from anywhere as long as there is an internet connection. 3. Precision Molding Machines Essential for Improving the Quality of Precision Injection Molding We address this with equipment including mold temperature management and sensors. Example) Automation of inspection - In-mold pressure sensors Monitors in-mold pressure waveforms and determines defects in real-time. In case of defects, automatic external discharge (line out) occurs.

Acquired certification in September 2017! Supporting widespread use with injection molding technology refined over more than 70 years.

For more details, please refer to the PDF document or feel free to contact us.