Automotive parts
Automotive parts
Introducing automotive parts.
121～150 item / All 234 items
-
Cooling with water Heatstroke prevention Small DC pump
The materials are resin, rubber, and assembled products! They can be used in automobiles (mass production), as well as in office automation equipment and medical devices.
last updated
-
Facial massager for beauty devices, exfoliation suction with DC diaphragm pump.
It has high suction and discharge power, and can achieve both pressurization and depressurization with one unit! It is compatible with both air and liquids.
last updated
-
Suction face massage device for beauty care, diaphragm pump for gas use.
Rubber parts are mainly made of EPDM! They have high suction and discharge power while being compact.
last updated
-
Compressor for beauty devices, airbrush pump for makeup spraying.
For gases! Compact yet possesses high suction and discharge power, achieving both pressurization and depressurization with a single unit.
last updated
-
Small DC diaphragm pump for mist water supply for beauty devices, suitable for liquids.
Self-priming, no priming water needed! A diaphragm pump that can be customized according to your application.
last updated
-
Small DC diaphragm pump for sending beauty serum for facial devices (for gas use)
Powerful performance that achieves high vacuum! A pump with strong suction and discharge capabilities, yet compact in size.
last updated
-
Airbrush for compressor beauty devices, DC diaphragm pump for gas use.
It has high suction and discharge power, and can achieve both pressurization and depressurization with a single unit! We provide a compact and suitable product.
last updated
-
Small DC air pump (for gas and liquid)
Introduction of a compact-sized small DC air pump with high vacuum, high pressure, low noise, and low cost!
last updated
-
Hard polyurethane heat bridge countermeasures
Measures against heat bridges, such as not achieving the original freezing and refrigeration performance! There may be cases where we propose from the design stage.
last updated
-
Structure diagram of a small DC diaphragm pump for gas (pressurization and suction) and for liquid.
Self-priming, no priming water needed! Compact DC diaphragm pump suitable for gases and liquids.
last updated
-
Structure diagram of a small DC centrifugal pump (micro pump) for liquids.
Easily surpassing a total durability time of 250 hours! A compact DC centrifugal pump that achieves lightweight design and low cost.
last updated
-
Performance design of insulation including rigid urethane and VIP (vacuum insulation materials).
Proposal for thermal insulation performance design! Our company turns ideas into "form" with technology.
last updated
-
Basic knowledge of rigid polyurethane (polyol/isocyanate)
The delivery time until production is relatively short, and it is possible to produce small quantities of a wide variety of products! It is lightweight due to the use of foamed resin.
last updated
-
Precision molding, injection molding (lens molding) optical components, dimensional tolerance 0.005mm.
Supports up to 0.1 micron! Injection molding small precision factory (injection molding machine) converted to a clean booth.
last updated
-
Lens molding, automotive parts, camera lens cleaning unit, small DC pump.
Proposal for an automotive camera cleaning unit! Achieving cleaning power through high flow and high pressure.
last updated
-
Sensor and camera lens cleaning unit DC pump, molding and assembly of the housing.
Improved monitor visibility for sensor cleaning and camera lens cleaning! Suitable unit design.
last updated
-
Vehicle-mounted components, sensor cleaning unit, small DC pump, molding and assembly of the housing.
Further reduction of noise and vibration! Can be used for sensor cleaning units in automotive components.
last updated
-
Automotive parts sensor cleaning unit, small DC pump, molding and assembly of the casing.
For the automotive parts sensor cleaning unit! We propose a compact DC pump from the mechanism and structural design.
last updated
-
Construction machinery sensor cleaning unit, small DC pump, molding and assembly of the housing.
For construction machinery sensor cleaning units! Some of the resin molded products, including the casing molding, are produced at our factory.
last updated
-
Small DC pump for tractor sensor cleaning unit - molding and assembly of the housing.
Sensor cleaning unit for tractors! Achieving cleaning power with high flow and high pressure.
last updated
-
Robot sensor cleaning unit, small DC pump, molding and assembly of the housing.
Sensor cleaning unit for robots! The compact DC pump is proposed from the perspective of mechanism and structural design.
last updated
-
Bus sensor cleaning unit, small DC pump, molding and assembly of the housing.
For the bus sensor cleaning unit! Some of the resin molded parts, including the casing molding, are produced at our factory.
last updated
-
Railway sensor cleaning unit, small DC pump, molding and assembly of the housing.
By designing mechanisms and structures in units, we aim for even lower noise and vibration!
last updated
-
Robot sensor cleaning unit / camera lens cleaning unit
Quick response possible! We propose from the mechanism and structural design of small DC pumps.
last updated
-
Bus sensor cleaning unit, camera lens cleaning unit, DC pump.
Some of the resin molded products, including the molding of the casing, are produced at our factory! High flow rate, high pressure, and suitable unit design.
last updated
-
Development of a camera lens cleaning unit for buses
Achieving cleaning power with high flow and high pressure! Monitor visibility is improved.
last updated
-
Proposal for cleaning units for AD/ADAS automotive parts.
Proposal for a unit that designs mechanisms and structures, further reducing noise and vibration! AD/ADAS automotive parts cleaning unit.
last updated
-
Development of a camera lens cleaning unit for railway vehicles.
Improved monitor visibility! We offer unit designs for high flow, high pressure, and optimal suitability.
last updated
-
Possesses a system and proposal capability that can accommodate various product designs.
We also accommodate the customer's requested delivery dates, costs, required quality, and shortened lead times!
last updated
-
Injection Molding (Clean Booth)
Pursuing the enhancement of quality in constant temperature and humidity management! Compatible with injection molding (below 230t) in a clean booth.
last updated
