All products and services
121～150 item / All 434 items
-
High rigidity and high strength roof rail gas-assisted molding PA66GF
Increased rigidity, improved flatness, improved shrinkage, and consideration for weight reduction! Achieving high-level dimensional accuracy that was previously difficult.
last updated
-
Engineering plastic (precision molding) dimensional tolerance 0.005mm (0.1 micron unit)
The precision is less than 1/1000mm! It is suitable for industries such as batteries, automobiles (mass production), and medical devices.
last updated
-
Rubber alternative injection molding TPE (thermoplastic elastomer)
It is possible to shape it into a form close to the finished product all at once without mixing or measuring! Elasticity can be achieved without vulcanization.
last updated
-
Delivery box for cool delivery developed by our company.
No need for high-cost mold investments! It can also accommodate specifications for security locks and anti-theft chains.
last updated
-
Resistance to in-person receipt as an infection prevention measure: Proposal for a cool delivery box.
The retention time below 30°C in the delivery box is long! This promotes the reduction of redelivery and encourages the use of drop-off delivery.
last updated
-
Proposal for Cool Delivery Boxes for the Spread of Online Shopping
It is also compatible with the specifications of anti-theft locks and theft prevention chains! It maintains a temperature below 30°C for up to 10 hours.
last updated
-
Proposal for Cool Delivery Boxes for CO2 Reduction in Global Warming
Assistance with insulation for maintaining low temperatures in delivery boxes! Specifications can be modified according to the required insulation performance.
last updated
-
Equipment Measuring Instrument/Test Equipment Oscilloscope
Transform ideas into 'form' with technology! Observe changes in electrical signals of a small DC pump using an oscilloscope.
last updated
-
Quality Assurance Equipment Bath Lid Bathtub Laboratory
Accurate bending performance tests are possible! Tests (such as heat resistance tests) can be conducted simultaneously on four units above the bathtub.
last updated
-
(Social) Product Safety Association (SG Mark) Factory Registration Type Certification Bath Lid
Successfully developed a "deformable insulated bath cover" tailored to the curved shape of the bathtub! We are working on research and development for further improvements.
last updated
-
Insulated bath cover (with handle)
Selling high-insulation lids, with cumulative shipments surpassing 600,000 units (1.2 million pieces)! Awarded the Energy Conservation Grand Prize in 2004.
last updated
-
Non-Freon insulation foam thermal conductivity initial value 0.021 W/mk
We use materials with an ozone depletion potential of zero and an extremely low global warming potential!
last updated
-
Rigid urethane molding window frame filling
Fill the window frame! It suppresses condensation in the window frame area and keeps the window side always clean.
last updated
-
Wine cellar door hard urethane molding
Block outside temperatures and maintain a constant temperature inside! Our company turns ideas into "form" with technology.
last updated
-
Medical reagent refrigerator cabinet and door
Insulation for laboratory refrigerators! Using high-performance polyurethane with excellent insulation properties, it is approximately 30% more efficient compared to standard expanded PS!
last updated
-
Rigid urethane molded commercial refrigerator condenser container
Insulation of the condenser for commercial refrigerators! Approximately 30% more efficient compared to standard foam PS (0.034 W/mk).
last updated
-
Hard polyurethane molding vending machine HOT/COLD partition board
While maintaining insulation, we also secure the capacity inside the vending machine! Our company turns ideas into "form" with technology.
last updated
-
Rigid urethane molding, gas venting optimization, composite integral molding with different materials.
Gas release optimization! We have refined composite molding with different materials cultivated over more than 40 years of history.
last updated
-
Insulated material for air cargo refrigerated carts, Alpolic sandwich panel.
Injecting urethane between the Alpolic panels! It can be integrally molded with the panels for high performance.
last updated
-
Hard polyurethane molding commercial coffee server cooling tank insulation material
The thermal conductivity is an initial value of 0.021 W/mk! Using materials with a zero ozone depletion potential and an extremely low global warming potential!
last updated
-
Insulated cold tank for office coffee servers made of rigid polyurethane foam.
Response with blow-molded products + rigid foam urethane assemblies! Using materials with extremely low global warming potential.
last updated
-
Rigid urethane molded insulation tank for drink dispensers
Compared to general expanded PS (0.034W/mk), it has about 30% higher performance! It is compatible with blow-molded products and rigid foam urethane assemblies.
last updated
-
Hard polyurethane molded insulation tank for cup vending machines
Using the self-adhesive power of urethane! There are no gaps between the resin tank and the urethane, preventing peeling and condensation.
last updated
-
Rigid urethane molding insulation material for gas water heater storage tanks.
Insulation of the outer circumference and top surface of the storage tank! Non-combustible paper is used for the surface material, providing flame resistance.
last updated
-
Rigid polyurethane molding beer server cooling tank insulation material
Uses high-performance urethane with excellent thermal insulation properties! It has features that are less likely to degrade in performance.
last updated
-
Non-combustible paper molded with rigid urethane for irregularly shaped foam products, insulation material for water heater storage tanks.
Non-combustible paper used for irregular foam products! Achieving space-saving compared to conventional glass wool.
last updated
-
Insulation material for hot water storage tanks made of rigid polyurethane for Enecut.
Insulation of the outer circumference and top surface of the hot water tank! A polyurethane that conforms to the shape of the tank using non-combustible paper for the surface material.
last updated
-
Cold storage tank for beverage dispensers for family restaurants.
Insulation material, rigid polyurethane molding! We can accommodate with blow-molded products + rigid foam polyurethane assemblies.
last updated
-
Insulated tank for beverage server, rigid polyurethane foam.
A cooling tank made from materials with an ozone depletion potential of zero and an extremely low global warming potential!
last updated
-
Insulation material for cold storage tanks of beverage servers for fast food, made of rigid polyurethane molding.
There are no gaps between the resin tank and the urethane, making it less likely to peel off and preventing condensation, which helps maintain performance!
last updated
