Environmental impact of cooler boxes (cooler boxes)

Significantly higher insulation performance than a standard styrofoam box! It can be reused for a long time.

last updated Dec 03, 2021

Development of drug-resistant rubber: Small DC diaphragm pump (micro pump)

Development of rubber with increased durability for ink! Development of chemical-resistant rubber for reagents and cleaning agents for use in medical device analytical equipment.

last updated Nov 22, 2021

Small DC centrifugal pump (micro pump) with magnetic coupling system.

For liquids with a flow rate of 3.0L/min or more, and 3.7L/min or more! No shaft seal is required, eliminating concerns about liquid leakage.

last updated Nov 19, 2021

Food Sanitation Law Compliant Small DC Centrifugal Pump (Micro Pump) for Liquids

By eliminating the axis part, it maintains a consistently clean discharge! It complies with food sanitation laws.

last updated Nov 19, 2021

Spray Use Small DC Diaphragm Pump (Micro Pump) Type R27

Capable of gas-liquid mixed operation! It features a compact size with high vacuum, high pressure, and low noise.

last updated Nov 19, 2021

Small DC diaphragm pump capable of gas-liquid mixed operation for spraying hypochlorous acid water.

Hypochlorous acid water can be used! The rubber parts are mainly made of EPDM.

last updated Nov 19, 2021

Small DC centrifugal pump (micro pump) for liquids HQ characteristic diagram

Achieves a long lifespan and tough specifications that easily surpass a total endurance time of 250 hours! Realized compact, lightweight, and cost-effective design.

last updated Nov 19, 2021

Lightweight water-washable partition (aluminum frame) rigid urethane

Made of rigid polyurethane, lightweight! It can be wiped clean with a disinfectant spray, keeping it hygienic.

last updated Nov 19, 2021

Infection control washable partition (aluminum frame)

Ideal for infection control! A partition with a resin board surface and an aluminum frame.

last updated Nov 19, 2021

Water-washable partition (aluminum frame) hard polyurethane

You can splash water on it and wash it thoroughly! Made of PP, it can also be wiped and used when dirt or moisture adheres to it.

last updated Nov 19, 2021

Wipeable with disinfectant spray partition (aluminum frame)

For vaccination sites! As a measure against virus droplets, it can be washed thoroughly with water.

last updated Nov 19, 2021

Small DC pump (micro pump compact size for gas and liquid)

45 million delivery records! We also offer products that comply with the Food Sanitation Act.

last updated Nov 19, 2021

Precision molding (injection) dimensional tolerance 0.005mm (up to 0.1 micron unit)

Injection molding machines range from 50t to 230t! Facilities for constant temperature and humidity environments aimed at precision molding, along with clean spaces to prevent foreign material adhesion.

last updated Nov 19, 2021

Injection molded air conditioner outdoor unit molded product

The materials used are resin, engineering plastics, and general-purpose plastics! We turn ideas into "forms" with technology.

last updated Nov 19, 2021

Proposal for a COOL delivery box that maintains a temperature below 30°C for 10 hours.

Specifications can be changed, such as adjusting the thickness of the urethane, to match the required insulation performance! There is no need for costly mold investments.

last updated Nov 19, 2021

Insulated tank for beverage dispensers, rigid polyurethane foam.

Less likely to experience performance degradation due to the risk of peeling and prevention of condensation! Approximately 30% higher performance insulation material compared to conventional expanded PS.

last updated Nov 19, 2021

Custom-made type cargo COOL container with VIP insulation board.

Top-class insulation performance in the industry! There are benefits to reducing the amount of electricity needed to cool the container.

last updated Nov 19, 2021

Inline equipment assembly (clean room) disposable type

Consistent operations in a clean room (Class 10000)! We are committed to delivering high-quality products.

last updated Nov 19, 2021

Equipment Clean Room Small DC Pump (Micro Pump)

Depending on the quality level, assembly can be accommodated on a Class 10000 and Class 100000 line (approximately 600m2)!

last updated Nov 19, 2021

Basic Knowledge of Molding Machines: Differences Between Horizontal and Vertical Injection Molding Machines

Basic knowledge of molding machines! We will introduce the differences between horizontal and vertical injection molding machines.

last updated Nov 11, 2021

Factory DX transformation Tablet introduction Molding results (for each molding machine)

Transforming paper newspapers into tablets! Grasp achievements in real-time and check progress on a web screen!

last updated Nov 12, 2021

Basic Knowledge of Rigid Urethane: Water Absorption Comparison Experiment

We conducted a comparison experiment on the water absorption properties of rigid urethane! Our company turns ideas into "form" through technology.

last updated Nov 11, 2021

Basic Knowledge of Rigid Urethane (Cyclopentane) Chemical Resistance

For industries such as building materials and medical devices! Rigid urethane has excellent chemical resistance.

last updated Nov 11, 2021

Examples of self-adhesion of rigid urethane with various materials.

It is possible to create a strongly bonded insulation layer on the object through direct foaming without using adhesive!

last updated Nov 04, 2021

Basic Knowledge of Thermal Conductivity Thermal Conductivity Table Rigid Polyurethane, etc.

We will introduce the basic knowledge of thermal conductivity, starting with the characteristics of our materials!

last updated Nov 04, 2021

Basic Knowledge of Small DC Diaphragm Pumps (Micro Pumps)

Usable for gases and liquids! Introducing the basics of small DC diaphragm pumps.

last updated Nov 04, 2021

Lightweighting Hard polyurethane molding (thinning) / Injection molding (metal replacement with resin)

The resinization of metal parts has the environmental benefit of being an alternative to finite metal resources!

last updated Feb 28, 2022

50 years of polyurethane foam molding technology

We will make various proposals utilizing the lightweight, thermal insulation, vibration damping, and soundproofing properties of polyurethane foam materials!

last updated May 17, 2024

Basic Knowledge of Injection Molding

Introducing the basic knowledge of injection molding suitable for mass production of products with complex shapes!

last updated Nov 04, 2021

Design of molds

By designing with consideration of material characteristics and molding conditions in advance, we aim to shorten the lead time for mold design!

last updated Nov 04, 2021