All products and services
1～30 item / All 76 items
-
Deodorant "Deo Series" [Analyzing the source of odors and coordinating into deodorants]
Overwhelmingly low cost compared to deodorization devices! Reduction of environmental impact through CO2 reduction.
last updated
-
Attention! High-performance liquid absorbent material with a pistogram pattern [Universal type absorbent mat]
Not just for oil! A versatile high-performance liquid absorbent that can also be used for alkaline and acidic liquids! An absorbent mat with a pictogram design to raise awareness.
last updated
-
Water-based oil treatment agent "Oil Mover T"
Oil Mover T is a highly effective oil treatment agent for spilled oil and oil stains.
last updated
-
Adhesion Preventive Agent for Asphalt Plants "Plant Guard T"
Thoroughly pursuing the asphalt adhesion prevention of the plant! Firmly protecting the important plant.
last updated
-
Heat-meltable asphalt sheet "Kurosuke"
It is a heat-meltable asphalt sheet. Since it uses a direct heating method with a gas burner, there is no need for any cumbersome work such as using a melting kettle.
last updated
-
Industrial multipurpose deodorizer "Deo Multi T"
[Environmental Compatibility] Reset strong odors! Achieve a comfortable space with chemical deodorization technology!
last updated
-
[NETIS Registered Product] High-Performance Water-Soluble Asphalt Adhesion Preventive Agent
Prevents asphalt adhesion and protects aggregate quality: the superiority of "Super Earth Guard T"!
last updated
-
Industrial multipurpose deodorants "Deo Clear T" and "Deo Multi T"
Chemically decomposes the source of odors. Safely and effectively removes both acidic and alkaline odors.
last updated
-
Lubri, a pre-agent for pumping fresh concrete.
The amount of waste generated can be reduced by approximately 98%! A pre-agent for pumping fresh concrete that has no time constraints until use.
last updated
-
Resin-made flooring board "W Board"
We offer a rich variety of colors and sizes! Lightweight and easy to transport, our resin mats are lighter than steel plates and rubber mats.
last updated
-
Soil contamination countermeasure material "Magical Fix"
Post-treatment soil can be maintained in a neutral range! A soil contamination countermeasure material with excellent pH buffering capacity.
last updated
-
Polymer cement-based cross-section repair material "Refremolset SP Hyper"
Simple mixing work! Introduction of polymer-cement-based section repair materials with high crack resistance.
last updated
-
Non-shrink polymer cement grout "Reflegrout-P"
Just mix it with water on-site! It shows significantly higher salt resistance compared to concrete structures.
last updated
-
Non-shrink mortar "Reflegrout"
It has good fluidity and can be pumped, making it excellent for use in large cross-sections!
last updated
-
Epoxy resin adhesive for wet concrete surfaces "Refletuff Bond"
For patching old concrete and mortar! Excellent adhesion and workability epoxy resin adhesive.
last updated
-
Concrete curing agent "Sumise S.C."
Smooth trowel finish is possible! It prevents the occurrence of hair cracks due to rapid drying.
last updated
-
High Polymer Polymer Emulsion Sealer "Lion Bond A"
Exhibits excellent bubble suppression effects and improves surface accuracy! The water-reducing effect is significant, and drying shrinkage is reduced.
last updated
-
Concrete substrate primer "Refletreat"
Ideal for primer for cross-section repair materials! It has stable adhesion strength even at low temperatures (5°C).
last updated
-
High-toughness spray-applied polymer cement mortar "Reflemor Set D"
Exhibits stable strength over a long period! Excellent adhesion, allowing integration with existing concrete.
last updated
-
Polymer cement-based spray material "Refre G Shot"
High-performance special powder resin is blended! It has excellent adhesion to existing concrete and ensures integration with the substrate.
last updated
-
Polymer cement-based cross-section repair material "Refremolset SP"
Exhibits stable performance over a long period! Excellent durability and weather resistance.
last updated
-
High durability early strength RC slab surface repair material "Refremolset SP"
Achieves practical strength at an age of 1 to 1.5 days! It has high adhesion and prevents peeling.
last updated
-
High-speed hard fracture repair material "Refremolset M"
Uses high-performance powder polymer! Excellent adhesion to existing concrete, allowing for integration.
last updated
-
Concrete cross-section repair material "NEW Refremol Set"
Finishing materials such as lining can be applied 1 to 2 days after construction! It has low shrinkage and excellent adhesion.
last updated
-
Hollow Filling Material Water-Compatible "Filcon Light Aqua"
Lightweight at a moisture density of about 1.4, designed for a compressive strength of over 3N/mm² suitable for upper subgrade applications!
last updated
-
Semi-flexible pavement injection material "New Funcoat 50"
Even at a mother material asphalt concrete temperature of 60 to 80°C, it reliably penetrates into the gaps! It maintains stable strength over a long period.
last updated
-
High fluidity non-separating mortar "Filcon 300W"
It is possible to carry out grouting work with uniform quality! It has excellent pumpability and self-leveling properties.
last updated
-
Crack-reducing fiber-reinforced non-shrink mortar 'Filcon R-F'
Achieves practical strength in a few days! Specially formulated non-shrink mortar with pre-mixed nylon fibers.
last updated
-
High-strength non-shrink mortar "Filcon H" for rapid curing.
Long-term strength is also stably exhibited! Suitable for emergency construction under time constraints or while traffic is open.
last updated
-
Non-shrink mortar for pads "Filcon Pad"
Excellent moldability! It demonstrates stable adhesion strength to liner plates, existing concrete, and more.
last updated