March 16 (Wednesday) to March 18 (Friday), 2022: Invitation to exhibit at the 'Secondary Battery Expo - Battery Japan'

テクネ計測

★As the event date approaches, we would like to remind you again★ Techne Measurement Co., Ltd. will be exhibiting at the "Smart Energy Week 13th Secondary Battery Exhibition" held from March 16 (Wednesday) to March 18 (Friday), 2022. This time, we will showcase our products in two main categories: batteries and smart energy. 【Smart Energy】 We will display hydrogen sulfide-based instruments, dew point meters, and oil moisture meters that can be useful for biomass, thermal power generation, smart grids, and wind power generation. 【Batteries】 We will exhibit dew point meters and moisture meters for solid-state batteries and lithium-ion batteries, hydrogen sulfide meters, dew point meters and moisture meters ideal for trace moisture management in glove boxes and hydrogen batteries, oxygen concentration meters (oxygen analyzers) for oxygen quantity management, polymer dew point meters for dew point measurement in dry rooms, and dew point meters and temperature-humidity meters optimal for managing moisture content in supply gases for fuel cells. Please be sure to visit the Techne Measurement booth.

Date and time Wednesday, Mar 16, 2022 ～ Friday, Mar 18, 2022
10:00 AM ～ 06:00 PM
The last day is until 17:00.
Capital ■Venue: Tokyo Big Sight, East Exhibition Hall ■Address: 3-11-1 Ariake, Koto-ku, Tokyo 135-0063 ■Booth Number: E41-34
Entry fee Free

Related product information

Explosion-proof trace hydrogen sulfide analyzer Model 3010BX
A fixed-type hydrogen sulfide analyzer capable of measuring 0 to 2,000 ppm! It is certified for overseas intrinsic safety and explosion protection!

Model: 3010BX Measurement Range: 0-200/0-2000 ppm Measurement Accuracy: FS±1 % Power Supply: 117 VAC±10 % Power Consumption: 10 W or less Output: 1-5 V, 4-20 mA Flow Rate: 0.5–1.0 L/min Operating Pressure: Primary Side (upstream of the oxygen analyzer): 3.0 kPaG to 0.1 MPaG Secondary Side (downstream of the oxygen analyzer): Atmospheric vent or exhaust line 〇 Explosion-proof specifications International Standards (IECEx): Ex ia/db IIB+H2 T4 Ga/Gb -32°C ≤ Tamb ≤ +46°C
Capacitive Dew Point Meter TK-100 Online Dew Point Meter
★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

【Transmitter Section】 Model: TK-100TR Measurement Range: -100 to +20 ℃dp Dew Point Accuracy: ±2 ℃dp Power Supply: 12~28 VDC (Power Current 40 mA or more) Power Consumption: 1 W or less Output: 4-20 mA (Maximum Load Resistance 500 Ω) Flow Rate: 0.5 to 10 m/s (when directly inserted) 1 to 20 L/min (when using sensor block) Operating Pressure: 10-4 Pa to 30 MPa Cable: Twisted Pair, Shielded Cable Cable Length 2 m (Option: 1 to 1,000 m) Connection Diameter: 5/8 UNF (Option: 3/4 UNF, 1/4 VCR, 1/2 G) 【Monitor Section】 Model: TK-100MS Display: 5-digit LED Power Supply: 100 to 240 VAC ±10 % Output: 4-20 mA (Maximum Load Resistance 500 Ω) Alarm Output: 3 points, Relay Contact 1a, Capacity 3 A, 250 VAC Power Consumption: Approximately 8 W
Mirror cooling dew point meter for high dew points (up to 95 °C dp) - MBW573
DP3 successor model. A high-precision mirror-type dew point meter capable of measuring high dew points (up to +95°C) with a built-in heater.

Dew point measurement range: -50 to +95 ℃ (varies by model) Humidity measurement range: 0.1 to 100 % (varies by model) Temperature measurement range: -50 to +100 ℃ Accuracy (dew point, frost point): ±0.1 ℃ Reproducibility (dew point, frost point): ±0.05 ℃ Output: Analog output 2 points, digital output 0-1 V, 1-5 V, 0-10 V, 0-20 mA, 4-20 mA, RS-232 Connection diameter: 1/4 or 6 mm Swagelok Sample gas pressure: 0.3 to 2.5 bar, optional 10 or 20 bar Sample gas flow rate: 0 to 1 ℓ/min (pump and flow meter built-in) Operating temperature and humidity: -10 to +40 ℃ / maximum 98 %RH (no condensation) Storage temperature: -20 to +50 ℃ Power supply: 100 to 120 VAC or 200 to 240 VAC, 50/60 Hz Power consumption: 200 W or 300 W (varies by model)
Mirror-cooled dew point and purity meter MBW973-SF6 for insulating gas SF6
A portable mirror-type dew point meter capable of measuring the dew point and purity of SF6 gas, which does not release the gas into the atmosphere after measurement.

Model: MBW973-SF6 Dew Point Measurement Range: -50 to +20 ℃dp, 40 to 20,000 ppmV, 5 to 2,500 ppmW SF6 Purity Measurement Range: 80 to 100 % SO2 Concentration Measurement Range: 0 to 100 ppm or 0 to 500 ppm (Electrochemical type) *Optional Pressure Measurement Range: 0.12 MPa to 1 MPa (Absolute pressure) Dew Point Measurement Accuracy: ±0.5 ℃dp, ppm: ±1 ppm + 6% of reading SF6 Purity Measurement Accuracy: ±0.5 % SO2 Concentration Measurement Accuracy: ±2 % of full scale Pressure Measurement Accuracy: ±3 kPa Digital Output: RS-232, built-in logging function Operating Environment (Temperature/Humidity): -10 to +40 ℃ / Max 98 %RH (No condensation) Operating Pressure: 20 kPa ~ 900 kPa G Operating Altitude: Up to 2000 m Storage Temperature: -20 to +50 ℃ Power Supply: 100 to 120 VAC or 200 to 240 VAC, 50/60 Hz Power Consumption: 200W