ティックコーポレーション 本社 Official site

Air pressure-operated protruding and rotating sanitary design cleaning nozzle! After cleaning, it is stored in a sealed manner, making it ideal for the food, pharmaceutical, and chemical industries.

Technical Specifications: • Maximum operating temperature: 95°C • Maximum ambient temperature: 65°C • Recommended operating pressure: 2.5 bar • Flow rate: approximately 54 L/min at 2.5 bar • Installation orientation: all directions supported (horizontal and vertical) • Bearings: free-spinning rotor structure • Materials: 316L stainless steel, PEEK, EPDM or FKM • Additional features: air flush compatible, additional parts (nuts and nipples) available

Pneumatic control type protruding rotating nozzle specialized for automatic cleaning of ducts and cyclones: 'SIP compatible', 'usable under vacuum', 'compatible with horizontal and vertical structures'

Technical Specifications: Maximum operating temperature: 150°C (same for ambient temperature) Recommended operating pressure: 2 bar Starting pressure: approximately 1.6 bar / stopping pressure approximately 0.3 bar Material: 316L/316Ti stainless steel, PTFE, FKM or EPDM Bearing: slide bearing Surface roughness: external Ra ≤ 0.8μm / internal Ra ≤ 1.6μm Weight: approximately 2.2kg Installation direction: can be installed in any direction Others: self-draining design, compatible with drying air blow, sensor mountable

"Lechler" unique pop-up nozzle! Installed at the same level as the wall surface. The nozzle in the rotating part pops out under pressure to perform cleaning.

【Specifications】 Series: 5P2/5P3 [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: Approximately 2.2m Material: Stainless steel / 316 SS Stainless steel / 316Ti SS (spring) Stainless steel / 316SS (snap ring) PEEK material / slide bearing FKM / (O-ring) Maximum temperature: 140℃ Recommended pressure: 2 bar 5P2 Opening pressure: Approximately 0.1MPa / Closing pressure: 0.5MPa 5P3 Opening pressure: Approximately 0.09MPa / Closing pressure: Approximately 0.05MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

Gear-type tank cleaning nozzle! Capable of cleaning tanks up to 24m at low pressure!

Series: 5TM Angle: 360° Maximum tank diameter: 24m Material: SUS316L SS, PTFE, Carbon fiber Maximum temperature: 60°C (can be adapted up to 90°C upon request.) Recommended operating pressure: 0.5MPa Installation direction: All directions

The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

【Specifications】 Series: 5TB Maximum tank diameter: 15m Material: Stainless steel / 316L SS Stainless steel / 632 SS PTFE / PEEK material / Zirconium oxide / EPDM Maximum temperature: 95℃ Recommended pressure: 0.5MPa Installation direction: All directions Recommended filter: 80 mesh Weight: 4kg Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

【Specifications】 Series: 5S2/5S3 Angle: 180°, 270°, 360° Maximum tank diameter: 8m Material: Stainless steel / 316L SS Stainless steel / 316 SS Stainless steel / 632 SS PEEK, PTFE, Zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant

The ≪Lechler≫ powerful straight spray cleans stubborn dirt stuck inside the tank!

【Specifications】 Series: 5TA Angle: 360° Maximum tank diameter: 12.3m Material: Stainless steel / 316L SS Stainless steel / 632 SS PEEK, PTFE, zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

High-impact, high-reliability control rotary cleaning nozzle! "Supports up to 9.6m," "High flow rate, high cleaning power," "Compatible with rotation monitoring sensors."

Technical Specifications: • Cleaning target diameter: 0.25 to 9.6m • Maximum operating temperature: 95°C • Recommended operating pressure: 3 bar • Filter specification: 0.3mm / 50 mesh • Installation orientation: All directions compatible • Bearing structure: Double ball bearing • Connection diameter: 1 BSPP, 1 1/4 BSPP, 1 1/2 BSPP (HygienicFit compatible) • Material: 316L stainless steel, PEEK, EPDM

Powerful cleaning with a special shape nozzle from Lechler! This shape is unique to Lechler!

【Specifications】 Series: 577 Angles: 180°, 270°, 360° Maximum tank diameter: 5.5m Material: Stainless steel / 316L SS, PTFE Maximum temperature: 90°C Recommended operating pressure: 3bar Installation direction: Vertical Standards: Compliant with FDA and Regulation (EC) No. 1935/2004

Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

【Specifications】 Rotary tank cleaning nozzle Series: 566 Angle: 180°, 360° Maximum tank diameter: 1.7m Material: Stainless steel / SUS316L, PEEK material Maximum temperature: 130°C (ATEX version: 90°C) Recommended operating pressure: 2bar [l/min] at p=2bar / 15 ? 21 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lechler long-selling nozzle! It can accommodate a wide range of spray angles, flow rates, and connection options.

【Specifications】 Series: 569 Angle: 270°, 360° Maximum tank diameter: 3m Material: Stainless steel / SUS316L SS PEEK material Rulon 641 Maximum temperature: 140°C (ATEX version: 90°C) Recommended operating pressure: 2 bar Installation direction: All directions (ATEX version: vertical only) Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

"Lechler" enables effective foam cleaning at low pressure!

【Specifications】 Series: 594/595 Series Angle: 360° Maximum tank diameter: Approximately 2.5m Material: Stainless steel / 316L SS PEEK material EPDM O-ring (EHEDG version) Maximum temperature: 100°C (short term: up to 140°C) Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and EHEDG

The ≪Lechler≫ slip-on connection has obtained the 3-A standard. It is suitable for use in harsh corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 573/583 Maximum tank diameter: Approximately 3m Angles: 180°, 270°, 360° Maximum operating temperature: 95°C (a version up to 130°C can be produced upon request) Recommended pressure: 0.2MPa [l/min] at p=0.2MPa / 41 ? 225 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and 3-A

Efficiently clean the tank with Lechler's innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MC Maximum Tank Diameter: Approximately 1.8m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

The ≪Lechler≫ Spinner series (5Mx series) is the ultimate masterpiece! With its innovative slot design, it efficiently cleans the inside of the tank!

Main Features: • Made of 316L stainless steel, suitable for high-temperature environments (up to 250°C) • Stable rotation performance due to double ball bearing structure • Various flow rates and spray angle variations available • Suitable for explosive atmospheres (ATEX certified) • Compliant with food and pharmaceutical standards (EC No. 1935/2004 and FDA compliant) Technical Specifications: • Cleaning target diameter: 0.25 to 2.6m • Maximum operating temperature: 250°C • Recommended operating pressure: 2 bar • Filter specification: 0.1mm / 170 mesh • Installation orientation: Can be installed in any direction • Connection diameter: 1/2 BSPP and 3/4 BSPP (HygienicFit compatible)

Lecher: Efficiently cleans the tank with an innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MI Maximum Tank Diameter: 2.6m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Obtained Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

"Lechler" is perfect for cleaning in limited spaces with its compact design!

Material: SUS-316L / SUS-440C 【Hastelloy Specification: Hastelloy C22 / C276】 Maximum Tank Diameter: Approximately 1.6m Ambient Temperature: Up to 140℃ Recommended Pressure: 0.2MPa Installation Direction: All Directions Recommended Filter: 170 Mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX

Lechler foam spray is possible! It can be used in corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 500.191 Angle: 180°, 270°, 360° Maximum tank diameter: approximately 1m Material: PVDF Maximum temperature: 90°C Recommended operating pressure: 2 bar [l/min] at p=2 bar / 13 ? 20 Installation direction: all directions Standards: FDA, Regulation (EC) No. 1935/2004

Entry model nozzle for rotary tank cleaning!

【Specifications】 Rotary tank cleaning nozzle Series: 500.186 Recommended tank diameter: around 1m Angle: 300° Recommended operating pressure: 2bar [l/min] at p=2bar / 18 Connection size: 1/2 BSPF Material: POM, stainless steel / 316SS Maximum temperature: 50℃ Installation direction: downward

Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

【Specifications】 Rotary tank cleaning nozzle Series: 500.234 Maximum tank diameter: within 1m Angle: 300° Connection size: M6 3/8 BSPF Material: Stainless steel / SUS316L Maximum temperature: 200°C Recommended operating pressure: 3bar [l/min] at p=3bar / 9.8 Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified

Would you like to save energy by conserving water through tank cleaning?

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, there is very strict management in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of them for tank cleaning spray nozzles. *For more details, please refer to the materials. Feel free to contact us as well.

In addition to the ≪Lechler≫ rotary tank cleaning nozzle, we also offer fixed spray balls! A comprehensive lineup is available!

【Lineup】 ○ Miniature nozzles for barrels and drums made of stainless steel → Precision rotating nozzle 500.234 series (smallest size) → Ultra-small rotating nozzle 566 series ○ Miniature nozzles for barrels and drums → Mini Whirly (rotating type) 500.186 series → Ultra-small rotating nozzle 500.191 series ○ MicroSpinner/MiniSpinner 5MC/5MI series ○ FoamWhirly 594/595 series ○ Rotating nozzle 569 series ○ Teflon rotating nozzle, especially for CIP 573/583 series ○ ACCU Clean made of stainless steel 515 series ○ High Impact Tank Cleaning Machine 5TM series ○ Static spray balls 527/540/541/591 series ○ Pop-up nozzle 5P2/5P3 series ○ Gyro nozzle 577/579 series ○ Hygienic Whirly 594/595 series ○ XactClean 5W2/5W3 ○ IntenseClean Hygienic 5TA/5TB/5TM series

Certified with 3-A! Suitable for high hygiene environment conditions.

【Specifications】 Fixed Spray Ball Series: 527 Angle: 360° [l/min] at p=2bar / 60 ? 420 [l/min] at p=3bar / 73 ~ 514 Maximum tank diameter: 8.2m Material: Stainless steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 1.5bar Installation direction: All directions Standards: 3-A, FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball RinseClean Series: 5B2/5B3 Angle: 180°, 360° Flow Rate: 15lit/min ? 670lit/min @ 0.2MPa Maximum Tank Diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316L Pin - Stainless Steel / SUS316L Maximum Temperature: 200℃ Recommended Operating Pressure: 2bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball Series: 591 Angle: 180°, 360° [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316Ti Pin - Stainless Steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.

Sturdy and compact design! Usable with steam and air!

【Specifications】 Fixed Spray Ball Series: 540/541 Angle: 240° [l/min] at p=2bar / 18 ? 118 Connection Size: 1/2 BSPF Maximum Tank Diameter: 9.5m Material: Stainless Steel / SUS303 Maximum Temperature: 200℃ Recommended Operating Pressure: 3bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but they are essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.