ティックコーポレーション 本社 Official site

World's One, Air Nozzle with Orifice Cover - An air nozzle that achieves strong impact force with laminar flow - One of the best-selling products.

Material: POM Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Cost reduction! A lineup of "low noise + energy-saving + high-performance" air nozzles approved by OSHA, FDA, and EC No. 1935/2004.

Many places still use open pipes for water drainage, blowing, transfer, and drying applications with compressors. By changing the blowing process to an air nozzle, noise generated can be significantly reduced, while also controlling air consumption and air pressure, allowing for the application of impact force. Leading with the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, performing blowing with powerful impact force from that orifice. Due to the strong injection force and the laminar flow of air, it reduces waste of air consumption and lowers noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, thanks to the manufacturer's unique design, air diffusion is prevented. The air nozzle FL-600E comes standard with an orifice cover (the world's first), allowing the injection port to be closed. This helps to minimize unnecessary air blowing in undesired areas. Please take a look. *Lechler GmbH is a German spray nozzle manufacturer.

Improving coating quality. Air nozzles that achieve efficient dust removal and energy saving with laminar airflow.

【Features】 - Achieves high impact force and low noise through laminar flow (organized air flow) - Adjustable air volume with orifice cover (discharge hole adjustment plug) - Energy-saving design that reduces air consumption by approximately 30% compared to conventional models - Complies with standards such as OSHA (noise) and FDA (materials) - High straightness blow pattern (47mm width) 【Our Strengths】 Tick Corporation collects products that contribute to improving production efficiency and environmental conservation from around the world, supporting solutions to on-site challenges. Utilizing our expertise in spray nozzles and air nozzles, we propose optimal solutions for our customers' processes.

Efficiently removes chips with laminar air. An air nozzle that balances noise reduction and energy saving.

【Features】 - The air emitted is laminar, maintaining high impact force while reducing noise. - The orifice cover (discharge hole adjustment plug) allows for adjustment of the necessary air volume. - Reduces air consumption, contributing to energy savings. - Complies with OSHA (Occupational Safety and Health Administration) noise standards. - High straightness blow pattern (47mm width). 【Our Strengths】 Tick Corporation collects excellent technologies from around the world and provides products that contribute to improved production efficiency and environmental conservation. We offer optimal solutions for on-site challenges, from liquid spraying to drying and blowing off.

Streamlining the drying process of the food manufacturing line. An air nozzle that achieves both energy savings and noise reduction.

【Features】 - Achieves high impact force and noise reduction through laminar flow (organized air flow) - Allows adjustment of the necessary air volume with an orifice cover (discharge hole adjustment plug) - Utilizes materials (POM) suitable for use in the food and pharmaceutical industries - Complies with standards such as FDA, (EC) No. 1935/2004, and (EU) 10/2011 - Designed with consideration for OSHA noise standards 【Our Strengths】 Tick Corporation collects products that contribute to improving production efficiency and environmental conservation from around the world, providing solutions to address customer site challenges. With a wide range of products including spray nozzles and air nozzles, along with our expertise, we support improvements at your site.

Sister product of the best-selling Rehiller company's air nozzle FL-600E, offered in POM without pigments.

Material: Pure POM (without pigments) Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Sister product of the best-selling Rehiller air nozzle FL-600E, made of PP material.

Material: PP Impact Force: 2N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 17Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 plastics

Sister product of the bestselling Rehiller air nozzle FL-600E, a type with half the spray width.

Material: POM Impact force: 0.8N @ 0.2MPa Noise level: 65 dB (A) @ 0.2MPa Flow rate: 8.5Nm3/h @ 0.2MPa Maximum operating pressure: 0.6MPa Heat resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in aluminum material.

Material: Aluminum Impact Force: 2.4N @ 0.2MPa Noise Level: 76 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 200℃ *Please be cautious of humidity *Refer to the catalog for mounting screws, dimensions, and spray width = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the bestselling Rehiller air nozzle FL-600E, offered in stainless steel 316L.

Material: SUS 316L Impact Force: 2N @ 0.2MPa Noise Level: 70 db (A) @ 0.2MPa Flow Rate: 13Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Sister product of the best-selling Rehiller air nozzle FL-600E, offered in stainless steel 316L, wide type FL-600ST.

Material: SUS 316L Impact Force: 4.2N @ 0.2MPa Noise Level: 78 db (A) @ 0.2MPa Flow Rate: 32Nm3/h @ 0.2MPa Maximum Operating Pressure: 3MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed version)): approximately 12 db (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Steel/PVC Impact Force: 3.7N @ 0.2MPa Noise Level: 83.5 db (A) @ 0.2MPa Flow Rate: 27N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approved Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Company Air Nozzle Multi-Channel Jet Series Flat Type

Material: Brass/PVC Impact Force: 2.3N @ 0.2MPa Noise Level: 77.5 dB (A) @ 0.2MPa Flow Rate: 15N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *For mounting screws, dimensions, and spray width, please refer to the catalog. = Features = - Quiet operation (compared to semi-circular single-port nozzle (copper pipe and crushed version)): approximately 12 dB (A) reduction - Low air consumption (up to approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle Multi-channel jet series flat type outlet two-phase type (FL-600FK sister product)

Material: Iron/PVC Impact Force: 4.3N @ 0.2MPa Noise Level: 86 dB (A) @ 0.2MPa Flow Rate: 31N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle, multi-channel jet series, flat type extra large.

Material: Iron/PVC Impact Force: 11.5N @ 0.2MPa Noise Level: 91.5 db (A) @ 0.2MPa Flow Rate: 100N?/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to semi-circular single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Sister product of the bestselling Rehiller air nozzle FL-600E, round type.

Material: ABS Impact Force: 2.2N @ 0.2MPa Noise Level: 74 db (A) @ 0.2MPa Flow Rate: 16Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed): approximately 12 db (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehira air nozzle FL-600E's sister product, round type, made of zinc material.

Material: Zinc Impact Force: 2.1N @ 0.2MPa Noise Level: 79 dB (A) @ 0.2MPa Flow Rate: 18Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 90℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 12 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller Co. air nozzle FL-600E's sister product, round type, offered in brass.

Material: Brass Weight: 52g Total Length: 50.5mm Width: 19mm Heat Resistance: 200℃ Screw Diameter: 1/4" PF (Male)

Best-selling Rehiller air nozzle FL-600E's sister product, small round type.

Material: Brass/POM Impact Force: 1.1N @ 0.2MPa Noise Level: 77 dB (A) @ 0.2MPa Flow Rate: 9Nm3/h @ 0.2MPa Maximum Operating Pressure: 1MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single-port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (5mm type).

Material: SUS316L Impact Force: 0.7N @ 0.2MPa Noise Level: 70 dB (A) @ 0.2MPa Flow Rate: 4.2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller air nozzle FL-600E's sister product, ultra-compact round type, made of stainless steel SUS316L (4mm type).

Material: SUS316L Impact Force: 0.4N @ 0.2MPa Noise Level: 63 dB (A) @ 0.2MPa Flow Rate: 2Nm3/h @ 0.2MPa Maximum Operating Pressure: 0.5MPa Heat Resistance: 550℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed): approximately 122 dB (A) reduction) - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages)

Best-selling Rehiller Company air nozzle FL-600E's sister product, super large round type.

Material: Brass/PVC Impact Force: 12.8N @ 0.2MPa Noise Level: 93 dB (A) @ 0.2MPa Flow Rate: 157N?/h @ 0.2MPa Maximum Operating Pressure: 0.6MPa Heat Resistance: 50℃ *Please refer to the catalog for mounting screws, dimensions, and spray width. = Features = - Quiet operation (compared to half-moon single port nozzle (copper pipe and crushed version)): approximately 122 dB (A) reduction - Low air consumption (approximately 30% reduction possible for the intended purpose) - Pressure loss within the air nozzle (approximately 6%) = Approval Standards = - OSHA (Occupational Safety and Health Administration [Noise])

The noise level has decreased by about 60%! This air nozzle can be used not only in general industries but also in food service and healthcare.

【Features】 ○ Noise level reduced by approximately 60% ○ Air consumption reduced by approximately 33% ○ Material made of SUS316L ○ Recommended maximum operating temperature is 180℃ ○ Suitable for a wide range of applications including food and medical use ○ Ideal for use in high-temperature environments ○ Angle-type structure allows for use in tight spaces ● For more details, please download the catalog or contact us.

Achieve cost reduction and quality improvement in the painting process! Low noise, energy-saving, high-performance air nozzle.

【Features】 - Low noise design - Energy saving - Powerful impact force - Uniform air flow - Approved by OSHA, FDA, and (EC) No. 1935/2004 【Our Strengths】 Tick Corporation is committed to providing optimal products to improve production efficiency, enhance cost efficiency, improve quality, and contribute to environmental conservation. We offer extensive knowledge of Rehiller air nozzles and provide the best solutions tailored to our customers' needs.

Low noise, energy-saving, high functionality! Contributing to the cleanliness of electronic devices.

【Features】 - Low noise design - Energy-saving design - Powerful impact force - Two types of blow patterns (flat type, round type) - Nozzle opening and closing possible with orifice cover 【Our Strengths】 Tick Corporation is committed to providing products that meet our customers' needs. We will respond carefully to inquiries and questions regarding Rehiller air nozzles.

Streamlining the drying process of textile products! Low noise and energy-saving air nozzle.

【Features】 - Low noise design - Energy saving - Uniform air blow - Various blow patterns - Approved by OSHA, FDA, (EC) no. 1935/2004 【Our Strengths】 Tick Corporation focuses on providing optimal products tailored to our customers' needs. Leveraging our extensive knowledge and experience with Lechler air nozzles, we support our customers in improving production efficiency.

Cost reduction! Improve dust removal efficiency in the steel industry with low noise, energy-saving, high-performance air nozzles!

【Features】 - Low noise design: Reduces the noise level in the work environment - Energy-saving: Limits air consumption, contributing to cost reduction - High functionality: Achieves efficient dust removal with powerful impact force - Two types of blow patterns: Choose between flat and round types according to application - Orifice cover: Closes the nozzle to suppress unnecessary air blowing 【Our Strengths】 Tick Corporation selects the optimal air nozzle tailored to customer needs and supports from introduction to operation. Based on years of experience and achievements, we contribute to solving customer challenges.

Low noise, energy-saving, high functionality! Reducing the cost of glass cleaning.

【Features】 - Low noise design: Reduces noise levels and improves the working environment. - Energy-saving design: Minimizes air consumption and reduces running costs. - High functionality: Achieves efficient water removal and drying with powerful impact force. - Two types of blow patterns: Available in flat and round types, allowing selection based on application. - Orifice cover: Can close the nozzle to suppress unnecessary air blow. 【Our Strengths】 Tick Corporation provides optimal products tailored to customer needs. With expertise and a wide range of offerings, we support customers in solving their challenges.

Optimize the cooling process in metal processing! Low noise, energy-saving, high-performance air nozzle.

【Features】 - Low noise design - Energy saving - Powerful impact force - Reduction of air consumption through laminar flow - Two types of blow patterns (flat type, round type) 【Our Strengths】 Tick Corporation focuses on providing products that contribute to solving customer challenges. We leverage our extensive knowledge and experience with Rehiller air nozzles to support optimal product selection and implementation.

Powerful impact force with laminar flow! Contributes to the efficiency of deburring operations and noise reduction measures.

【Features】 - Powerful impact force due to laminar flow - Optimization of air consumption with orifice cover - Noise level suppression - Materials suitable for use in food, medical, and pharmaceutical fields - Straight blow pattern (47mm width) 【Our Strengths】 Tick Corporation offers products that contribute to energy saving, high efficiency, and noise problem solutions. We provide optimal product selection tailored to customer needs and technical support.

Promotes blow drying after cleaning with laminar air. Achieves energy savings and quiet operation.

【Features】 - Uniform drying with laminar air - Noise level suppression - Energy-saving effect - Air adjustment with orifice cover - Materials suitable for food, medical, and pharmaceutical use 【Our Strengths】 Tick Corporation provides products that contribute to energy savings and productivity improvement. We offer optimal product selection tailored to customer needs and provide technical support.

Reduce the risk of foreign matter contamination in food manufacturing. Achieve energy savings and quiet operation.

【Features】 - Removal with powerful impact force through laminar flow - Noise level suppression - Energy-saving design - Material suitable for food, medical, and pharmaceutical use (POM) - Reduction of air waste with orifice cover 【Our Strengths】 Tick Corporation supports customers in solving their challenges through the provision of energy-saving products. Leveraging years of experience and expertise, we assist in the selection and implementation of optimal products.

What is "one stone, three birds"? It refers to an air nozzle that, while being low noise (quiet) and reducing air consumption (energy-saving), also has a strong impact force (high functionality).

It can reduce generated noise more effectively while providing impact force while suppressing air consumption and air pressure. Leading the best-selling FL-600E, compressed air is supplied from the air supply side to the nozzle opening, allowing for a powerful blow with strong impact force from that opening. Due to the air flow being laminar along with the powerful injection force, it reduces waste of air consumption and noise levels caused by turbulent injection, making it an environmentally friendly product that is gentle on people. The blow patterns are available in two types: flat and round. Additionally, due to the manufacturer's unique design, there is no air diffusion. The air nozzle FL-600E comes standard with an orifice cover (the world's first), which allows for the closing of the injection port. This helps to minimize unnecessary air blowing to unwanted areas. Approval Standards: - OSHA (Occupational Safety and Health Administration [Noise]) - FDA (U.S. Food and Drug Administration) - (EC) No. 1935/2004 (Approval for materials in contact with food and beverages) - Compliant with (EU) 10/2011 for plastics - TSCA5 compliant

Achieve powerful blowing with low noise and energy saving!

【Features】 - Low noise - Energy-saving - Powerful impact force - Uniform drying - Two types of blow patterns (flat type, round type) 【Our Strengths】 Tick Corporation offers a variety of products to contribute to improving our customers' production efficiency. We can propose various solutions related to drying, not just air nozzles.

Air nozzle that achieves both efficient paint drying and energy saving.

【Features】 - Reduces noise levels while achieving powerful impact force - Controls air consumption and air pressure, contributing to energy savings - Reduces waste of air consumption with laminar airflow - Offers two types of blow patterns: flat and round - Suppresses unnecessary air blowing with an orifice cover (world's first) 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. Based on years of experience and achievements, we propose the most suitable products for our customers' needs. We handle a wide range of industrial equipment, starting with the sale of air nozzles for compressed air.

An air nozzle that achieves both noise reduction and energy efficiency while maintaining high impact force for foreign object removal.

【Features】 - Reduces noise levels while achieving powerful impact force - Controls air consumption and air pressure, contributing to energy savings - Reduces waste of air consumption with laminar airflow - Allows selection between flat and round blow patterns - The orifice cover suppresses air blowing to unnecessary areas 【Our Strengths】 Tick Corporation provides products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. We handle a variety of products that meet the needs of different industrial sectors, including air nozzles from Lechler. Please feel free to contact us.

Air nozzle that achieves both efficiency in degreasing and drying and cost reduction.

【Features】 - Reduces noise levels while achieving powerful impact force - Controls air consumption and air pressure, contributing to energy savings - Reduces waste of air consumption through laminar airflow - Reduces noise levels through turbulent jetting - Controls air blow points with orifice cover (standard equipment on FL-600E) 【Our Strengths】 Tick Corporation provides products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. We have collected and provided products from around the world that meet the needs of various industrial sectors, including air nozzles from Rehiller. We will continue to strive for the development and provision of products that contribute to rationalization and environmental conservation.

Achieving energy savings and high impact strength in cooling and sterilization for food processing.

【Features】 - Reduces noise levels and minimizes impact on the work environment. - Achieves high impact force while controlling air consumption and air pressure. - Reduces waste of air consumption through laminar airflow. - Offers a choice between flat and round blow patterns. - Prevents unnecessary air blowing with an orifice cover. 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. We have collected and provided products from around the world that meet the needs of various industrial sectors, including air nozzles from Rehiller. We will continue to strive for the development and provision of products that contribute to rationalization and environmental conservation.

Achieving both efficiency in the cleaning and drying processes and reduction of environmental impact.

【Features】 - Reduces noise levels while achieving powerful impact force - Controls air consumption, contributing to energy savings - Reduces waste of air consumption through efficient blowing with laminar flow - Offers two types of blow patterns: flat and round - Unique manufacturer design suppresses air diffusion 【Our Strengths】 Tick Corporation is committed to providing products that contribute to solving various issues faced by companies, such as improving production efficiency, enhancing cost efficiency, improving quality, and considering environmental conservation. For many years, we have provided products that meet market needs based on product information collected from around the world. In particular, we support improvements in our customers' production sites through the sale of Rehila products in the field of compressed air nozzles.

Freely and precisely fixed to the blow area.

Total length 235mm Pipe side thread diameter 1/4" PT (male) Nozzle connection side thread diameter 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length: 195mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Fixed precisely at the blow area freely and effortlessly.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

Freely and precisely fixed to the blow area.

Total length: 120mm Pipe side thread diameter: 1/4" PT (male) Nozzle connection side thread diameter: 1/4" PF (female)

The air nozzle manufactured by Lechler, affectionately known as the Multi-Channel Jet (combining low noise, energy efficiency, and high functionality).

【Product Lineup】 ○ Flat Type: 600.130/600.484/600.283/600.493/600.562 Series * These products are referred to as "Multi-Channel Jet." → Powerful air jets across the entire target, low noise level, low air consumption. ○ Flat Nozzle for Air or Saturated Steam: 679 Series → Particularly wide-angle and powerful air jets. → Comes with a retaining nut for easy nozzle replacement, simple jet alignment. ○ Tangential Nozzle for Saturated Steam: 686 Series → Wide-angle, powerful air jets. ○ Round Type: 600.326/600.388 Series → Powerful air jets that create a linear impact pattern. → Low noise level, low air consumption. ○ Straight Type Nozzle for Air and Saturated Steam: 544 Series → Powerful air jets that create a linear impact pattern. ○ Cluster (Porous) Straight Type Nozzle for Air and Saturated Steam: 540/541 Series → Powerful air jets blowing from 40 individual holes. ● For more details, please contact us or refer to the catalog. ● You can download the English version of the catalog.