The video animation for the Lechler manufactured nozzle tip retractable rotary tank cleaning nozzle (commonly known as POP UP Whirly) has been released.

ティックコーポレーション本社

The POP-UP nozzle (rotating type) is an extremely optimal product for cleaning the entire tank and the inside of its piping. It can be mounted on the walls of tanks and pipes, and only extends from the nozzle tip under water pressure during operation, making it a revolutionary product. Seeing is believing. Please be sure to check out this animation. ≪Basic Information≫ It is used installed horizontally within the wall. The rotating nozzle pops out from the housing at a certain water pressure. The PopUp Whirly is ideal for cleaning pipes and foam spraying. The material used is mainly SUS316L. The recommended maximum tank diameter is up to 2m. The recommended pressure is 0.5MPa (normally 0.2MPa). ≪Approval Standards≫ FDA (U.S. Food and Drug Administration) Compliant with EC Regulation No. 1935/2004 Custom products with ATEX (explosion-proof type) are also available. ≪Main Industries of Use≫ Food and beverage industry Pharmaceutical industry Chemical industry

Date and time
Capital
Entry fee

Related product information

Rehilar Corporation tank cleaning nozzle PopUp Whirly ATEX
Lechler's tank cleaning spray nozzle PopUp Whirly now available in ATEX version (explosion-proof type).

It is installed horizontally within the wall and used. The rotating nozzle pops out from the housing at a certain water pressure. The PopUp Whirly is ideal for pipe cleaning and foam spraying. It is particularly used in the food and beverage industry, pharmaceutical industry, and chemical industry. The material used is mainly SUS316L. The recommended maximum tank diameter is up to 2m. The recommended pressure is 0.5MPa (typically 0.2MPa).
[Part 2] High cleaning power even at low pressure! 'Rehilar's tank cleaning nozzle'
Recommended for water-saving and energy-saving measures! Complies with hygiene and explosion-proof standards. Materials featuring installation examples available. For the food, beverage, and medical fields.

In industries that require tank cleaning, there are nozzles that cannot be used unless they meet various strict conditions. - 3A Sanitary Standards - EHEDG (European Hygienic Engineering and Design Group) - FDA (U.S. Food and Drug Administration) - regulation (EC) no. 1935/2004 - ATEX directive (explosion-proof specifications) As such, regulations are very strict in Europe and the United States. The German manufacturer Lechler provides nozzles that comply with these standards. Please make use of our spray nozzles for tank cleaning. We have prepared an LP that shows the cleaning effectiveness and efficiency by class. https://ticjapan.com/news/news-1282/ *Accessible from our company blog. For case studies, please refer to the URL below. https://tic-spray-solution.com/case-study/ *For more details, please refer to the materials. Feel free to contact us with any inquiries.
Rehilar Corporation rotary tank cleaning nozzle (Model number: 500.234)
Lechler: The world's smallest nozzle! Its compact design allows for cleaning in tight spaces.

【Specifications】 Rotary tank cleaning nozzle Series: 500.234 Maximum tank diameter: within 1m Angle: 300° Connection size: M6 3/8 BSPF Material: Stainless steel / SUS316L Maximum temperature: 200°C Recommended operating pressure: 3bar [l/min] at p=3bar / 9.8 Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified
Rehilar company's rotary tank cleaning nozzle (Model number: 500.186)
Entry model nozzle for rotary tank cleaning!

【Specifications】 Rotary tank cleaning nozzle Series: 500.186 Recommended tank diameter: around 1m Angle: 300° Recommended operating pressure: 2bar [l/min] at p=2bar / 18 Connection size: 1/2 BSPF Material: POM, stainless steel / 316SS Maximum temperature: 50℃ Installation direction: downward
Rehilar Corporation rotary tank cleaning nozzle (Model: 569 series)
Lechler long-selling nozzle! It can accommodate a wide range of spray angles, flow rates, and connection options.

【Specifications】 Series: 569 Angle: 270°, 360° Maximum tank diameter: 3m Material: Stainless steel / SUS316L SS PEEK material Rulon 641 Maximum temperature: 140°C (ATEX version: 90°C) Recommended operating pressure: 2 bar Installation direction: All directions (ATEX version: vertical only) Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehiler rotary tank cleaning nozzle (Model: 573/583)
The ≪Lechler≫ slip-on connection has obtained the 3-A standard. It is suitable for use in harsh corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 573/583 Maximum tank diameter: Approximately 3m Angles: 180°, 270°, 360° Maximum operating temperature: 95°C (a version up to 130°C can be produced upon request) Recommended pressure: 0.2MPa [l/min] at p=0.2MPa / 41 ? 225 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and 3-A
Rehira mini500 (tank cleaning nozzle)
The ≪Lechler≫ is a minimum tank cleaning nozzle with a length of approximately 30mm and an outer diameter of just φ9mm.

-
Rehiler rotary tank cleaning nozzle (Model: 5TM series)
Gear-type tank cleaning nozzle! Capable of cleaning tanks up to 24m at low pressure!

Series: 5TM Angle: 360° Maximum tank diameter: 24m Material: SUS316L SS, PTFE, Carbon fiber Maximum temperature: 60°C (can be adapted up to 90°C upon request.) Recommended operating pressure: 0.5MPa Installation direction: All directions
Rehila rotary tank cleaning nozzle (Model: 5P2/5P3)
"Lechler" unique pop-up nozzle! Installed at the same level as the wall surface. The nozzle in the rotating part pops out under pressure to perform cleaning.

【Specifications】 Series: 5P2/5P3 [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: Approximately 2.2m Material: Stainless steel / 316 SS Stainless steel / 316Ti SS (spring) Stainless steel / 316SS (snap ring) PEEK material / slide bearing FKM / (O-ring) Maximum temperature: 140℃ Recommended pressure: 2 bar 5P2 Opening pressure: Approximately 0.1MPa / Closing pressure: 0.5MPa 5P3 Opening pressure: Approximately 0.09MPa / Closing pressure: Approximately 0.05MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified
Rehiler manufactured rotary tank cleaning nozzle (Model: 5S2 / 5S3)
"Lechler" cleans with high impact and uniformity. It enables very effective cleaning through rotational control.

【Specifications】 Series: 5S2/5S3 Angle: 180°, 270°, 360° Maximum tank diameter: 8m Material: Stainless steel / 316L SS Stainless steel / 316 SS Stainless steel / 632 SS PEEK, PTFE, Zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant
Rehila rotary tank cleaning nozzle (Model: 594/595)
"Lechler" enables effective foam cleaning at low pressure!

【Specifications】 Series: 594/595 Series Angle: 360° Maximum tank diameter: Approximately 2.5m Material: Stainless steel / 316L SS PEEK material EPDM O-ring (EHEDG version) Maximum temperature: 100°C (short term: up to 140°C) Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and EHEDG
Rehiler rotary tank cleaning nozzle (Model number: 577)
Powerful cleaning with a special shape nozzle from Lechler! This shape is unique to Lechler!

【Specifications】 Series: 577 Angles: 180°, 270°, 360° Maximum tank diameter: 5.5m Material: Stainless steel / 316L SS, PTFE Maximum temperature: 90°C Recommended operating pressure: 3bar Installation direction: Vertical Standards: Compliant with FDA and Regulation (EC) No. 1935/2004
Rehiler manufactured rotary tank cleaning nozzle (Model: 5TA series)
The ≪Lechler≫ powerful straight spray cleans stubborn dirt stuck inside the tank!

【Specifications】 Series: 5TA Angle: 360° Maximum tank diameter: 12.3m Material: Stainless steel / 316L SS Stainless steel / 632 SS PEEK, PTFE, zirconia, EPDM Maximum temperature: 95℃ Recommended operating pressure: 0.5MPa Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Reihler rotary tank cleaning nozzle (Model: 5TB series)
The high-performance solid jet spray with Lechler gear control effectively removes stubborn dirt!

【Specifications】 Series: 5TB Maximum tank diameter: 15m Material: Stainless steel / 316L SS Stainless steel / 632 SS PTFE / PEEK material / Zirconium oxide / EPDM Maximum temperature: 95℃ Recommended pressure: 0.5MPa Installation direction: All directions Recommended filter: 80 mesh Weight: 4kg Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehilar's rotary tank cleaning nozzle (Model: 5MC Series)
Efficiently clean the tank with Lechler's innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MC Maximum Tank Diameter: Approximately 1.8m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehilar manufactured rotary tank cleaning nozzle (Model: 5MI series)
Lecher: Efficiently cleans the tank with an innovative slot design!

Rotary Tank Cleaning Nozzle Series: 5MI Maximum Tank Diameter: 2.6m Angles: 60°, 180°, 360° Material: SUS316L / SUS440C [Hastelloy Specification: Hastelloy C22 / C276] Environmental Temperature: Up to 140°C Recommended Pressure: 0.2MPa Installation Direction: Any direction Recommended Filter: 170 mesh Obtained Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehilar manufactured rotary tank cleaning nozzle (Model: 5NA series)
"Lechler" is perfect for cleaning in limited spaces with its compact design!

Material: SUS-316L / SUS-440C 【Hastelloy Specification: Hastelloy C22 / C276】 Maximum Tank Diameter: Approximately 1.6m Ambient Temperature: Up to 140℃ Recommended Pressure: 0.2MPa Installation Direction: All Directions Recommended Filter: 170 Mesh Acquired Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehilar's rotary tank cleaning nozzle (Model: 566 series)
Cleaning with effective flat jet nozzles. Explosion-proof specifications are also available.

【Specifications】 Rotary tank cleaning nozzle Series: 566 Angle: 180°, 360° Maximum tank diameter: 1.7m Material: Stainless steel / SUS316L, PEEK material Maximum temperature: 130°C (ATEX version: 90°C) Recommended operating pressure: 2bar [l/min] at p=2bar / 15 ? 21 Installation direction: All directions Standards: FDA, Regulation (EC) No. 1935/2004 and ATEX
Rehilar's rotary tank cleaning nozzle (Model number: 500.191)
Lechler foam spray is possible! It can be used in corrosive environments.

【Specifications】 Rotary tank cleaning nozzle Series: 500.191 Angle: 180°, 270°, 360° Maximum tank diameter: approximately 1m Material: PVDF Maximum temperature: 90°C Recommended operating pressure: 2 bar [l/min] at p=2 bar / 13 ? 20 Installation direction: all directions Standards: FDA, Regulation (EC) No. 1935/2004
Rehiler Company Tank Cleaning Spray Nozzle (General)
In addition to the ≪Lechler≫ rotary tank cleaning nozzle, we also offer fixed spray balls! A comprehensive lineup is available!

【Lineup】 ○ Miniature nozzles for barrels and drums made of stainless steel → Precision rotating nozzle 500.234 series (smallest size) → Ultra-small rotating nozzle 566 series ○ Miniature nozzles for barrels and drums → Mini Whirly (rotating type) 500.186 series → Ultra-small rotating nozzle 500.191 series ○ MicroSpinner/MiniSpinner 5MC/5MI series ○ FoamWhirly 594/595 series ○ Rotating nozzle 569 series ○ Teflon rotating nozzle, especially for CIP 573/583 series ○ ACCU Clean made of stainless steel 515 series ○ High Impact Tank Cleaning Machine 5TM series ○ Static spray balls 527/540/541/591 series ○ Pop-up nozzle 5P2/5P3 series ○ Gyro nozzle 577/579 series ○ Hygienic Whirly 594/595 series ○ XactClean 5W2/5W3 ○ IntenseClean Hygienic 5TA/5TB/5TM series
Fixed-type spray ball (Model number: 540/541 series)
Sturdy and compact design! Usable with steam and air!

【Specifications】 Fixed Spray Ball Series: 540/541 Angle: 240° [l/min] at p=2bar / 18 ? 118 Connection Size: 1/2 BSPF Maximum Tank Diameter: 9.5m Material: Stainless Steel / SUS303 Maximum Temperature: 200℃ Recommended Operating Pressure: 3bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but they are essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.
Fixed-type spray ball (Model number: 591 series)
Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball Series: 591 Angle: 180°, 360° [l/min] at p=2bar / 14 ? 460 [l/min] at p=3bar / 17 ~ 563 Maximum tank diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316Ti Pin - Stainless Steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 3bar Installation direction: All directions Standards: FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.
Fixed-type spray ball (Model number: 527 series)
Certified with 3-A! Suitable for high hygiene environment conditions.

【Specifications】 Fixed Spray Ball Series: 527 Angle: 360° [l/min] at p=2bar / 60 ? 420 [l/min] at p=3bar / 73 ~ 514 Maximum tank diameter: 8.2m Material: Stainless steel / SUS316L Maximum temperature: 200℃ Recommended operating pressure: 1.5bar Installation direction: All directions Standards: 3-A, FDA and Regulation (EC) No. 1935/2004 certified About the Fixed Spray Ball: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.
Fixed-type spray ball RinseClean (Model number: 5B2/5B3)
Adaptable to a wide range of applications due to design and product specifications! Can be used even under high hygiene requirements and high-temperature environments.

【Specifications】 Fixed Spray Ball RinseClean Series: 5B2/5B3 Angle: 180°, 360° Flow Rate: 15lit/min ? 670lit/min @ 0.2MPa Maximum Tank Diameter: 5.5m Material: Nozzle - Stainless Steel / SUS316L Pin - Stainless Steel / SUS316L Maximum Temperature: 200℃ Recommended Operating Pressure: 2bar Installation Direction: All Directions Standards: FDA and Regulation (EC) No. 1935/2004 compliant About Fixed Spray Balls: The cleaning method differs from that of rotating nozzles, but it is essential for specific applications. - No moving parts - Self-draining - Easy installation and maintenance - Suitable for sanitary applications Compared to rotating nozzles, fixed spray balls typically require 2 to 3 times the flow rate.