トーコー Official site

A paint drying machine that finishes without unevenness, uniformly, and beautifully. It has a quick startup, achieving 100% heating immediately after switching on! *Widely adopted in the automotive industry.

Near-infrared halogen lamps, unlike far-infrared halogen lamps used for drying and heat curing, promote drying and curing from the inside of the target object, thereby reducing the occurrence of defects such as incomplete drying or curing. Additionally, they reach the required temperature instantly when powered on, allowing for efficient processing in a short time. This leads to cost savings through energy efficiency and contributes to environmental sustainability. *For more details, please download the catalog or feel free to contact us.*

Efficient use of painting equipment: Rail system for suspended heaters. Proposal for ceiling-mounted heaters to optimize factory space and improve work efficiency.

The near-infrared paint dryer promotional model SIR-9810W uses a panel section to create a ceiling-mounted paint dryer. It efficiently dries roofs, side panels, hoods, etc., and since the heater is ceiling-mounted, it takes up little space, allowing for effective use of the factory. By equipping it with an optional radiation temperature sensor, temperature management is also possible.

Using halogen lamps, achieve shorter delivery times, increased efficiency, and improved quality with high-speed drying of printed materials! It is also ideal for drying non-PVC films.

■PD-5102 <Product Specifications> ● Power Supply: AC 100V 50/60Hz ● Electrical Capacity: 1kW (500W x 2 units) ● Power Cord Length: Approximately 4m ● Weight: Approximately 29kg ● Control Method: Controller Timer Control Method: Continuous Automatic Output Timer Setting Range: 1 minute to 12 hours Timer Setting Error: ±10% (percentage relative to maximum scale) Heater Output Method: LOW, MID, HIGH - 3-stage output

Designed a high-efficiency dryer using near-infrared halogen lamps! By promoting drying and effects from the inside, it reduces un-dried and un-cured areas! Energy-saving and long-lasting!

■Details of Use - Drying and curing of paints - Preheating and heating of films, paper, fabric, etc. - Drying and curing of food products - Drying of plywood - Spot heating - Freeze prevention for conveyor belts - Prevention of icicles in tunnels - Melting snow on roofs and pedestrian bridges - Melting snow on railway tracks - Drying and curing of printers such as FAX machines and copiers, etc.

For high-speed drying of printed materials! Near-infrared dryer with settings adjustable to printing and transport speeds.

For more details, please refer to the PDF document or feel free to contact us.

Paint drying heater using near-infrared halogen lamp, equipped with a standard radiation temperature sensor. Features putty drying mode.

■SIR-3458S <Product Specifications> ● Power Supply: AC 3-phase 200V 50/60Hz ● Electrical Capacity: 4.5kW (1.5kW x 3 units) ● Power Cord Length: Approximately 8m ● Weight: Approximately 42kg ● Control Method: Controller Preheat, Full Heat 2-stage continuous automatic output Temperature Control Method: Infrared Temperature Sensor Preheat Timer Setting Range: 0 minutes to 60 minutes Preheat Timer Setting Error: ±1% (relative to maximum scale) Full Heat Timer Setting Range: 0 minutes to 60 minutes Full Heat Timer Setting Error: ±1% (relative to maximum scale) Unlike far-infrared halogen lamps used for drying and heat curing, near-infrared halogen lamps promote drying and curing from the inside of the target object, reducing the occurrence of issues such as incomplete drying or curing. Additionally, they reach the required temperature instantly upon power-on, allowing for efficient processing in a short time. This leads to cost savings through energy efficiency and contributes to environmental sustainability. *For more details, please refer to the PDF document or feel free to contact us.