All products and services
1～30 item / All 102 items
-
"LED display that is easy for anyone to see" *We accept product development using LEDs!
With highly visible LED technology, it is possible to design and manufacture LED products that are easy to see regardless of individual differences in color perception. We provide consistent support from prototyping to mass production.
last updated
-
Level Crossing Electronic Sound and Light Device 'SI61373A-01'
The maximum load capacity is 7.0A (non-inductive resistive load), and the mass is 3.0kg or less!
last updated
-
Special Signal Light (Double-Sided Flashing Type) 'SD112814-01'
Using easily workable aluminum! The current consumption is 1.2A ± 0.3A, and the mass of the light-emitting device is approximately 4.5kg.
last updated
-
Special Light Signal Device (LED Type) 'SD42871A-01'
Signal device using LED! Rated voltage DC24.0V, dimensions 530×530×350mm.
last updated
-
Special Signal Light (Rotating Type) 'SD112813-01'
The current consumption is 700mA or less, and the dimensions (Φ×D) are Φ700×317mm (excluding protrusions)!
last updated
-
Level Crossing Signal Display Light (LED Type) 'SD4064※-01'
Using a stainless steel casing! Products with rated voltages of AC110V and DC24V are available.
last updated
-
Level Crossing Warning Prevention Unit (Type C) 'SB52931-01'
The current consumption is 130mA or less (at rated voltage), and the dimensions are 62×39×133.5mm!
last updated
-
Damping and Release Unit 'SB51732-01/1-01/-01'
The current consumption is 100mA or less (at rated voltage), and the dimensions are 62×38×130mm!
last updated
-
Damping Unit "SB5144D-02"
The rated voltage is DC 24V with a ripple content of 5% or less, and the dimensions are 62×36×120mm!
last updated
-
Power converter "SD41951-01"
The efficiency at maximum output power is 84%, and the dimensions are 75×150×200mm (excluding protrusions)!
last updated
-
Timer Automatic Correction Unit 'SD42142B-01/C-01'
It can also be used with RS-232C interface devices such as electronic level crossings and electronic interlocking from other manufacturers!
last updated
-
Level Crossing Alarm Sound Generator (TA3A-VR Type) 'SI614918A-01'
The structure has been enhanced for improved lightning resistance, which can reduce equipment failures caused by lightning damage!
last updated
-
Level Crossing Alarm Sound Generator (TA3A Type) 'SI614910A-01'
Suppress the inrush current flowing during operation to 2A or less! Usable even with relays that are not heavy load contacts.
last updated
-
Intermittent Relay (FF-AIII) 'SG4083A-01'
The intermittent frequency is 50±5 times/min! The F-shaped relay design allows for space-saving and easy installation.
last updated
-
Sound Generator (B) 'SB5249B-01'
The current consumption is 150mA or less, and the dimensions are 58×134×213mm! It comes with 2 speakers and speaker mounting brackets.
last updated
-
Level Crossing Information Display Device 'SD5057※-01'
The maximum number of characters that can be registered, including decorations, is 2048 bytes, and the dimensions are 830×195×130mm!
last updated
-
Level Crossing Signal Failure Detector (Automatic Reset Type II)
Detection of continuous disconnection due to failure and poor disconnection drop based on alarm conditions (R relay) and disconnector drop conditions.
last updated
-
Inconsistency Detector II
Detects issues such as one-sided train non-detection and equipment failures! Enhances the safety of level crossings.
last updated
-
Low Voltage Detector (VLCII)
One device, three functions! Capable of low voltage detection for DC power and AC power in level crossing equipment boxes and signal equipment rooms.
last updated
-
VAM sensor
A VAM with an integrated AGT modem connected directly to the steady-state monitoring system.
last updated
-
Information transmission device (step type)
The Communication Management Department (CMU-2) can connect 5 lines, with a maximum of 100 transmission units (CCU-2) per line.
last updated
-
VAM Analysis Device <iOS Compatible Version>
In addition to reading VAM data, settings and monitoring are possible! The read data can be sent via email and analyzed on a PC.
last updated
-
VAM analysis device
The loaded data can be analyzed using analysis software for conditional searches and trigger searches, which helps reduce analysis time.
last updated
-
Non-contact type level crossing memory
The relay operation conditions are read by the current clamp sensor, making installation easy.
last updated
-
Information Memory VAM32 Network-Compatible General Type
The input condition number is 32 conditions, and it can store data for 100,000 variations.
last updated
-
Information Memory VAM32III
Output contact when a malfunction occurs and display an error on the display unit. There are two types: built-in GPS for time correction and non-built-in type.
last updated
-
Information Memory VAM32II
No dedicated reader is required, and it can be easily analyzed using a computer or similar device.
last updated
-
Information Memory VAM32
It is possible to store, read, and analyze the operating status of relay-type level crossing equipment.
last updated
-
Information Memory (VAM) Memory Unit with Clock Correction Support
By connecting the timer automatic correction unit, the clock can be automatically corrected.
last updated
-
Earth Checker (with fault detection function)
Capable of storing insulation resistance values during normal monitoring, earth detection, and earth recovery.
last updated