東洋精機製作所 Official site

This is a testing machine that reproduces the state in which thin paper, fibers, and films bend under their own weight to calculate the Clark's breakage (stiffness).

■Reference Standards: JIS P 8143, L 1096 ■Grip Rotation Speed: 1.0 rpm ■Power Supply: Single-phase, AC 100V, 50/60Hz, 5A ■Dimensions: W270 × D420 × H470 mm ■Weight: 20 kg ■Options: Compact Printer 【Model PS-A1】 (RS-232C interface required) Interface for Compact Printer 【Model IF】 Windshield (500mm, 700mm) 【Model WS-500, WS-700】

It is a testing machine that evaluates the stiffness (rigidity) of materials such as cardboard.

■Bending length: 51.8±0.1 mm (Note: Bending length of 50 mm is a conversion value) ■Disc rotation speed: 170 to 210°/min ■Test specimen: Width 38 to 40 mm, length approximately 70 mm, thickness 3.2 mm or less ■Measurement range (bending angle 15°): 9.81 mN·m, 49.1 mN·m, 98.1 mN·m ■Reference standards: JIS P 8125-2, ISO 2493-2 For other specifications, please refer to the catalog.

The tear strength of materials such as paper, film, and fabric is measured by the loss of potential energy of a pendulum in a sector shape, and the calculation results are displayed digitally.

■Measurement: Digital display ■Test piece: 63mm × 76mm ■Power supply: Single-phase, AC100V, 50/60Hz, 1A ■Dimensions: W50 × D42 × H70cm ■Weight: Approximately 36kg ■Options: Needle clamp, small printer [Model PS-A1], data processing software [Model S], etc. ■Reference standards Paper: JIS P 8116 Plastic: JIS K 7128-2, ISO 6383-2 Textiles: JIS L 1096 (Please specify as the dimensions of the clamp may change)

It is a testing machine for evaluating the puncture impact strength of thin materials such as films.

■Capacity: 0 to 1.5J, 0 to 3J, dual scale ■Dimensions and Weight: W740×D300×H650mm, approximately 82kg ■Options: Air chuck [Model: AC] Safety cover (covers the entire main unit) [Model: FISC] *Does not come equipped with an interlock switch with the main unit The following are options for the digital type Safety cover (with auto release device) [Model: F-AREL] *Device that automatically releases the pendulum Comes with interlocked safety cover Pendulum angle adjustment mechanism included Common data acquisition software (for film impact tester) [Model: EX-2FI] Compact printer [Model: PS-A1]

This is a tabletop universal testing machine with a maximum load capacity of 1 kN. The E3-L can accommodate specimens with large elongation.

■Load capacity: max. 1kN ■Effective stroke*: E3-L: about 830mm, E3-S: about 330mm (when using J-3 chuck) ■Test speed: 0.05 to 1500mm/min ■Options: Dedicated data processing device [Model CON], contact-type standard line tracking device [DE-C], various chucks (grippers), jigs, compact printer [Model PS-A1] ■Power supply: Single-phase, AC100V~115V, 50/60Hz, 3A or single-phase, AC200V~240V, 50/60Hz, 2A (choose one) ■Dimensions: W435 × D460 × H1400mm (E3-L), W435 × D460 × H900mm (E3-S) ■Weight: about 62kg (E3-L), about 47kg (E3-S) For other specifications, please refer to the catalog.

It is a universal testing machine with a maximum load capacity of 50 kN and 20 kN.

■Load capacity: max. 50kN・20kN ■Stroke: 940mm ■Test speed: 0.0005–1000mm/min ■Power supply: Three-phase, AC200V, 50/60Hz, 10A *Options Various constant temperature chambers, data processing device [Model CON], compact printer [Model PS-A1], dedicated stand (S) [Model BED-S], etc. For other specifications, please refer to the catalog.

It is a universal material testing machine with a maximum load capacity of 20 kN.

■Maximum load capacity: 20kN ■Test speed: 0.0005 to 1000 mm/min. (Note: Model VG20F is up to 500 mm/min.) ■Stroke: 1100 mm *Options Data processing software [Model WD], various constant temperature baths, optional crosshead for constant temperature baths [Model OC], dedicated stand (for VG) [Model BED-VG], small printer [Model PS-A1], splash prevention cover (for Strolograph VG), and others. For other specifications, please refer to the catalog.

-Measurement method: Load cell -Measuring load range: 0.0 to 30.0N -Sticking load: 2 to 5N (standard) max. 20N (optional) -Number of times to perform measurement: 1, 3, 5 (selectable) -Sticking time: 0.0 to 99.9sec. -Specimen mounting wheel down speed: 60mm/min., 1000mm/min. (to be selected) -Specimen mounting wheel separating speed (Select one from the options (1) to (3) below) (1) 5, 7.5, 10, 15, 20, 25, 30, 50 mm/min (2) 100, 500, 700, 1000, 1250, 1500, 2000, 3000 mm/min (3) 5, 10, 50, 100, 500, 1000, 1500, 3000 mm/min -Power Supply: Single-phase, AC100 to 240V, 50/60Hz, 0.5kVA -Dimensions: W300 x D330 x H510mm -Weight (approx.): 18kg

Mooney viscometer with a rotorless mechanism.

■Sample chamber design: Rotor-less type, non-friction sealed type ■Test temperature: Room temperature +20℃ to 200℃ ■Rotational speed: Variable speed from 0.1 to 8 rpm ■Mooney viscosity: 0 to 200M ■Scorch time: 0 to 99.9M (5 points) ■Options: Data processing device [Model CON-L], air filter set [Model DC-RM4], small printer [Model PS-BS1], stress relaxation software [Model R-SR2], etc. For other specifications, please refer to the catalog.

This is a testing machine for measuring the viscosity of unvulcanized rubber and the scorch time of the rubber.

■Die shape: V-shaped groove die (Option: square groove die) ■Test temperature: Room temperature +20°C to 200°C ■Rotational speed: 2 rpm ■Mooney viscosity: 0 to 200 M ■Scorch time: 0 to 99.9 M (2 points) ■Options: Dedicated data processing device [Model CON-L], rotor preheating tank [Model M-RPH], stress relaxation measurement [M-SR2], small printer [Model PS-BS1], etc. ■Reference standards: JIS K 6300-1, ISO 289-1 to 4, ASTM D1646 For other specifications, please refer to the catalog.

This is a vulcanization testing machine (rotorless rheometer/MDR) for evaluating the vulcanization characteristics of rubber. Fully automated testing is also possible with the optional sample automatic loading and unloading device.

■Die shape: Rotor-less type non-friction sealed type Flat die (standard) Conical die (optional) ■Amplitude angle: ±0.10° to ±2.00° (variable in 0.01° increments) ■Frequency: 0.83 to 2.5Hz (50 to 150cpm) ■Temperature range: Room temperature +20°C to 230°C ■Torque range: 100 dN·m auto range (maximum 200 dN·m) ■Sample loading/unloading: Manual (standard) Fully automatic (optional) ■Options: Automatic sample loading/unloading device (pin type, film type), data processing device (PC, dedicated software included), foam pressure measurement device, programmed heating device, phase angle measurement device, viscoelasticity measurement device, etc. ■Reference standards: JIS K 6296-1, -3, JIS K 6297 (ISO 13145) (for viscoelasticity measurement option), ISO 6502-1, -3, ASTM D5289 For other specifications, please refer to the catalog.

Related standards: ISO 812, ISO 974, ASTM D746

-Cooling method: Refrigerator -Heat transfer medium: Ethanol, approx. 10L -Temperature range: -70℃ to +40°C -Power supply: Single-phase, AC100V, 50/60Hz, 3kVA (or specify) -Dimensions: W650 × D700 × H1250mm -Weight (approx.): 190kg

This is a testing machine that applies impact to a plastic specimen and determines the impact value from the energy of the pendulum required for destruction.

■Reference Standards: Charpy Impact Test: JIS K 7111-1, ISO 179-1, 179-2, ASTM D6110 Izod Impact Test: JIS K 7110, ISO 180, ASTM D256 Tensile Impact Test: JIS K 7160, ISO 8256, ASTM D1822 Other Impact Peel Test ■Hammer Measurement Range: 0.5 to 25J ■Display Language: Japanese and English (switchable) ■Options: Compact Printer [PS-B1], Hammer Release Device [Model H-REL], Instrumentation System, Data Processing Device [Model CON], Hammer Brake [Model ITBK], Safety Cover [Model ITSC], Charpy Test Specimen Positioning Support [Model ACBAST] (allows precise specimen setup by placing the tip needle on the notch area), etc.

It is a testing machine for evaluating the bending resilience of materials such as textiles, paper, and films.

For other features and characteristics, please refer to the catalog or contact us.