Constant temperature chamber tensile testing machine Strograf T 4-channel type!

It is a tensile testing machine equipped with a 4-point suspension and a constant temperature chamber (temperature range 40°C to 150°C).

● Tensile tests can be conducted on materials with high elongation in temperature environments (40℃ to 150℃). ● Up to four test specimens can be tested simultaneously. ● Since the crosshead is installed inside the chamber, the stroke between the chucks can be larger within the constant temperature chamber compared to a combined machine that attaches a constant temperature chamber to a standard tensile testing machine or universal testing machine.

Product Inquiry

basic information

■Number of hangers: 4 ■Temperature range: 40℃ to 150℃ ■Load capacity: 500N × 4 hangers (maximum 2kN) ■Crosshead stroke: 1100mm ■Effective stroke: approximately 800mm (when using O-ring chuck) ■Test speed: 0.5 to 500mm/min. For other specifications, please refer to the catalog.

Price range

Please contact us for details

Delivery Time

Please contact us for details

Model number/Brand name

Catalog No. 120, Model T-4F

Applications/Examples of results

Tensile test of materials with high elongation under temperature conditions (40℃ to 150℃) (4 samples tested).

News about this product（1）

Introduction to the Universal Material Testing Machine "Strograph"
- Product news
The "Strograph" is a versatile testing machine that conducts characteristic evaluation tests for tensile, compression, and bending strength of various materials such as plastic and rubber. It can measure the mechanical properties of test specimens, including "tensile strength, elongation, yield point, endurance limit, stress, bending load, bending strength, and bending modulus." 【What is a Tensile Test?】 The purpose of a tensile test is to understand the characteristics in relation to tensile force. This test applies tension to the sample until it fractures, measuring the mechanical properties such as tensile strength, yield point, and elongation. From these measurements, the fracture state and yield state are calculated and used for material strength calculations. 【What is a Compression Test?】 A compression test involves placing test specimens, such as rectangular prisms, cylinders, or cylindrical shapes, between two parallel plates and applying a load to determine the relationship between stress and strain until failure occurs. 【Specifications of the Strograph】 You can choose from models with a capacity ranging from 500N to 50kN. Additionally, we offer a variety of grips (chucks) depending on the samples being measured. If standard products do not meet your needs, custom solutions are also available, so please feel free to consult with us. We have demo units available at our factory, so if you wish to measure samples, please do not hesitate to contact us.

Feb 08, 2022

Productnews list (19)

Distributors

東洋精機製作所

Official site

Phone number/address

Toyo Seiki Seisakusho Co., Ltd. is a comprehensive manufacturer of various material testing machines and environmental testing equipment targeting fields such as plastics, rubber, paints, paper, and textiles. Since its founding in 1934, we have been dedicated to "testing machines" and have supported our customers' research and development and quality control across various fields. We will continue to refine our technical capabilities and respond to our customers' needs. 【Product Development Timeline】 1955: Thermoplastic Resin Fluidity Tester 'Melt Indexer' 1960: Universal Material Testing Machine 'Strograph' 1963: Curing Tester 'Oscillating Disk Rheometer (ODR)' 1970: Mixing and Extrusion Testing Equipment 'Lab Plastmill' 1982: Capillary Rheometer 'Capillograph'

Product/Service List (188)