ツジカワ Official site

It is mainly used for foil stamping processes (foil printing) on packages and seal labels.

【Lineup】 ■ Copper Plate It has good durability, making it suitable for large lots. Its sharp edges are characterized by excellent foil cutting. Thickness options: 1.0mm, 1.5mm, 3.0mm, 7.0mm *1.5mm, 3mm, and 7mm are compatible with deep engraving. ■ Magnesium Plate (Etching/Corrosion Plate) Compared to hard copper plates, it has lower durability and is prone to oxidation, making it suitable for small lots. It is characterized by its ability to express fine patterns. Thickness options: 1.0mm, 1.6mm, 3.0mm, 7.0mm *3mm and 7mm are compatible with deep engraving. Maximum size: 600mm × 900mm ■ Engraving Plate It meets additional requests that cannot be achieved with corrosion plates (high durability, improved foil cutting, and a desire for plates with even deeper depths than deep engraving specifications). Materials: Iron, Brass, Copper, Magnesium *For more details, please refer to the PDF document or feel free to contact us.

If it's Tsujikawa, it's one-stop! We offer a set of rubber and metal plates for hot stamping along with high-precision jigs.

▶ Rubber Plate Base Material: Iron, Brass, Aluminum Rubber Hardness: 50°, 60°, 70°, 80°, 90° Submission Method: For flat surfaces, AI (Adobe Illustrator). For curved surfaces, 3D model data (IGS/STP format recommended), or molded products. ▶ Engraving Plate Material: Iron, Brass Submission Method: For flat surfaces, AI (Adobe Illustrator). For curved surfaces, 3D model data (IGS/STP format recommended), or molded products. ▶ Jig Material: Bakelite, POM, Devcon, Iron, Brass, Aluminum, Psycho Wood, Stainless Steel, Acrylic, and other solid resins in general Submission Method: 3D model data (IGS/STP format recommended), or molded products. *For more details, please refer to the PDF document or feel free to contact us.

It is mainly used for foil stamping, embossing, and debossing processes on packages and seal labels.

■Copper Plate (Etching/Corrosion Plate) Thickness Types 1.0mm 1.5mm 3.0mm 7.0mm *1.5mm, 3mm, and 7mm are compatible with deep engraving Maximum Size 1.0mm: 365mm × 650mm 1.5mm~: 455mm × 650mm Side Specifications for 7mm Plate GTP, Geets, Bobst, KAMA Others Drilling, step-down, edge cutting, sarai processing, inspection film output ■Magnesium Plate (Etching/Corrosion Plate) Thickness Types 1.0mm 1.6mm 3.0mm 7.0mm *3mm and 7mm are compatible with deep engraving Maximum Size 600mm × 900mm Side Specifications for 7mm Plate Normal, GTP, Geets, Bobst, KAMA Others Drilling, step-down, edge cutting, sarai processing, inspection film output ■Engraving Plate Material Iron, Brass, Copper, Magnesium

This is a special specification for metal plates for hot stamping. When additional value and differentiation are needed.

The combination of a resin relief plate and a metal intaglio plate creates a three-dimensional effect on the paper.

We provide high-precision receiving jigs tailored to molded products using data digitization with 3D scanners and 3D modeling technology!

■Material Bakelite, POM, Devcon, iron, brass, aluminum, psycho wood, stainless steel, acrylic, and other solid resins in general. ■Submission Method 3D model data (IGS/STP format recommended) or molded products. Submission method

It contributes to product differentiation! Hot stamping (foil stamping) that gives plastic products a sense of luxury with a metallic shine.

**[Mechanism of Hot Stamping Processing]** Hot stamping processing requires: ▶ Hot stamping machine ▶ Foil film ▶ Hot stamping plate (plus jig) The mechanism involves applying pressure and heat to the foil with the plate to transfer the foil onto the molded product. **[Hot Stamping Plates for Plastic Molded Products]** There are two main types of plates used for hot stamping processing on plastic molded products: - Rubber plates - Metal engraved plates In many cases, a rubber plate made by attaching a special heat-resistant rubber to a metal such as aluminum is used.

Complex surfaces and 3D shapes can also sparkle!

There are two main types of plates used for hot stamping processing on plastic molded products: Rubber plates Metal engraved plates **Features of engraved plates** ▶ High hardness (made from materials like brass and iron) ▶ High reproducibility of designs ▶ Ability to create a pressed-in appearance of designs ▶ Good thermal conductivity **Features of rubber plates** ▶ High adhesion to molded products, making decoration defects less likely ▶ (Does not require strong pressure) Printing surface does not get dented ▶ Does not damage molded products ▶ Can be reused by replacing the worn rubber **Features of Tsujikawa's jigs** ▶ Even without molded product data, the shape of the product can be digitized using a 3D scanner, allowing for the creation of plates and jigs from modeling data. ▶ Since they are produced in conjunction with hot stamping plates, accurate alignment and high precision can be achieved. ▶ With a diverse range of equipment and skilled technicians with extensive knowledge and experience, flexible design is possible, providing all processing in a one-stop solution.