It is possible to handle large amplitude signals of ±10V with a band elimination filter that only attenuates unwanted signals.

This is a DC stabilized power supply with a voltage of ±15V and a maximum load current of 1A. It uses a series regulator method, resulting in low noise and bipolar output. It is effective for applications in analog devices that are sensitive to noise.

Typically, learning about PID control requires a lot of effort, such as circuit design, component selection, and PCB fabrication. By using this board, you won't be burdened by such processes, making it suitable for learning purposes. It is equipped with potentiometers for setting each PID level, monitoring outputs for each PID level, and phase forward and reverse outputs.

By using it in combination with our TUSB-K16DIOZ, you can efficiently learn about digital input and output. Additionally, it is possible to visually and easily learn the input and output operations of the I/O ports through the lighting of LEDs and the ON/OFF of switches.

Turtle Industries Co., Ltd. (located in Tsuchiura City, Ibaraki Prefecture) is pleased to announce the launch of a new DC amplifier (amplifier) with a maximum output of 200Vpp. This high-speed, high-voltage output amplifier is designed for experimental and measurement purposes, achieving high performance and functionality at a low price. It is ideal for driving piezoelectric elements and more.

This is an ideal 8-channel isolation amplifier (amplifier) for testing and research purposes. It has a wide bandwidth and low noise, making it suitable for a wide range of applications. With the optional bracket, it can also be mounted in a rack.

It can be connected to a widely used LAN, allowing for output of voltage-free contacts through remote control via a computer. It demonstrates its effectiveness in system control for production factories, power facilities, large buildings, etc., where a LAN has already been established.

This is a flow meter calibration system that achieves compactness, lightweight design, and low cost through double chronometry utilizing research results from the National Institute of Advanced Industrial Science and Technology (AIST) in Japan. It allows for pulse measurement to the decimal point, enabling precise and rapid calibration of flow meters. This flow meter calibration system consists of a counter unit (TS-02FLCN01) and application software (TS-FLCNS01).

Turtle Industrial Co., Ltd. has started handling magnetic detectors and pipe & cable detectors manufactured by Schonstedt Instrument Company (USA). These products feature low prices, high sensitivity, and portability, and can detect iron, steel, television lines, power lines, optical fibers, gas pipes, water supply and drainage pipes, and more underground.

It is a band elimination filter that only attenuates unwanted signals. Its applications are extensive, including the removal of noise that adversely affects measurements and controls. - Case-mounted power supply internal type T-01BEF01C - Embedded board type T-01BEF01

This is a bandpass filter that allows only the necessary signals to pass through. Its applications are wide-ranging, including noise removal that adversely affects measurements and control. - Case-mounted power supply internal type T-01BPF01C - Embedded board type T-01BPF01

It has 8 channels of input, and the voltage range can be set for each channel. By connecting to a LAN, voltage measurements can be performed from a remote location. For AC voltage measurements, it employs a true RMS conversion method that is less affected by waveform variations compared to other methods, allowing for highly accurate measurements.

- High-speed DC amplifier with an output voltage of 600Vpp - Excellent large amplitude response with a slew rate of 400V/μs - Maximum output current is 100mA - Offset adjustment function with fine-tuning dial available

This is a Butterworth-type low-pass and high-pass filter with a slope of 18 dB/oct at 1 channel. It comes in a case with built-in power supply. By fully customizing it to meet the customer's required specifications, we can achieve the perfect cutoff frequency characteristics for the intended use. Although it is made to order, it can be delivered in about one week.

This is a wideband isolation amplifier with a passband width from DC to 1 MHz. By using this amplifier, you can completely isolate analog signals without being troubled by noise. The signal input and output use BNC connectors, making it more user-friendly.

This is a Butterworth-type low-pass and high-pass filter with a slope of 18 dB/oct at 1 channel. By fully customizing it to meet the customer's required characteristics, we can provide the perfect cutoff frequency characteristics for your purpose. It is a very versatile tool with a wide range of applications, such as noise removal and global limitations during AD conversion. Although it is made to order, it can be delivered in about one week.

We have placed two isolated bipolar output power supplies on a single circuit board. This is a stabilized DC power supply using a series regulator method, ideal for analog circuits that are sensitive to noise.

We have released an insulated parallel I/O unit with LAN connectivity that is widely available. It demonstrates its effectiveness in production factories and large buildings where LAN is already installed. It also supports power supply from PoE (Power over Ethernet). It complies with the RoHS directive.