news list
1~30 item / All 52 items
-
[Webinar Series on Medical Device Safety Standards from the Basics 2025] Session 2: Electromagnetic Interference/EMC Testing for Medical Electrical Equipment (IEC 60601-1-2)
The technical standards targeting medical devices are complex and varied, including the IEC 60601-1 series and individual standards from the IEC 60601-2 series. Additionally, in recent years, revisions have been made to the EMC standards. In this webinar, as part of the introductory series on safety standards for medical devices in 2025, we will provide an overview of IEC 60601-1-2, explain electromagnetic interference testing, and discuss the changes from the 4th edition to the 4.1 edition. We will also introduce some testing methods for basic standards that were requested in last year's survey.
-
[Webinar Series on Medical Device Safety Standards from the Basics 2025] Session 1: Medical Device Regulations and Safety Standards
We will be holding our popular webinar series on the introduction to safety standards for medical devices again this year, enhancing the content as always. In its third year, this time we will add new themes and incorporate the latest information, providing clear explanations of the overview of standards related to medical devices, as well as safety testing and evaluation points. We encourage you to use this as internal training for those involved in development, regulatory affairs, and quality control at medical device manufacturers. This webinar serves as an introduction to the "Webinar Series on Understanding Safety Standards for Medical Devices from the Basics," where we will introduce the regulations and standards for testing and evaluation related to safety for medical devices in major countries. We will also delve into the standards concerning usability and cybersecurity that will be applicable in Japan in 2024. We hope this will help you understand and prepare the necessary items for testing and evaluation in advance, thereby reducing the burden of applications as much as possible.
-
[Online Seminar] Key Points and Latest Trends in Radio Law Applications for Asian Countries in 2024, along with Updates on Major Regulatory Changes in Other Countries.
When shipping wireless-equipped products to countries in the Asia region, it is necessary to meet the regulatory requirements for each destination. These requirements vary significantly due to the radio wave regulations of each country and region, and in recent years, there have been changes to regulations and revisions to the application processes. This seminar will serve as a revised version of the radio wave regulation seminar conducted in 2022 for countries in the Asia region, following up on the previous content while also providing information on the latest trends and regulatory updates. This seminar is intended for those planning to expand their products to various Asian countries, as well as for those who are already operating in the region, providing an opportunity to organize information. Additionally, the second part of the seminar will include the latest trends from major countries outside of Asia. It will also be useful for obtaining the latest information. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
Technical consultation meeting on medical device safety standards (60601/61010)
We will hold an online free technical consultation session regarding medical device safety standards (60601/61010). - "I want to confirm whether the design of the medical device under development complies with the applicable standards." - "I want to check the applicable standards for the medical device under development before requesting an evaluation." - "I want to know the latest status of the 61010-1 standard and individual standards (e.g., EN IEC 61010-2-101:2022/A11:2022, etc.)." - "I want to confirm the available services, estimated costs, required time, necessary documents/samples, and key points for component selection." - "I would like to take this opportunity to ask questions about the requirements of the 61010-1/60601-1 standards." This is recommended for medical device manufacturers who have such questions or challenges. The application deadline is until July 31, so please take advantage of this opportunity. You can check the details of the seminar by clicking the "Details & Application" button below.
-
[Medical Device Safety Standards Introductory Seminar Series 2024] Session 3: Biocompatibility Evaluation of Respiratory Gas Pathways (ISO 18562)
ISO 18562 requires testing and evaluation of particulate matter, volatile organic solvents, and condensation that occurs in medical devices with respiratory gas pathways, playing a crucial role in ensuring safe use. This seminar will provide a simple introduction to the testing and evaluation content of ISO 18562. It will be beneficial not only for manufacturers of medical devices that already have respiratory gas pathways but also for those planning to develop such devices in the future. Additionally, there was a revision of the ISO 18562 standard in March of this year, and we will also introduce the key points of that revision. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
[Medical Device Safety Standards Introductory Seminar 2024] Session 2: Electromagnetic Interference/EMC Testing of Medical Electrical Equipment (IEC 60601-1-2)
The technical standards targeting medical devices are complex and varied, including the IEC 60601-1 series and individual standards from the IEC 60601-2 series. In recent years, revisions have been made to EMC standards, and the transition period to the JIS standard JIS T 0601-1-2:2023, issued in February 2023, is approaching in mid-February 2026. In this seminar, as part of the introductory series on safety standards for medical devices in 2024, we will not only provide an overview of IEC 60601-1-2 and an explanation of electromagnetic interference testing but also discuss the changes from the 4th edition to the 4.1 edition of IEC 60601-1-2 in line with JIS T 0601-1-2:2023. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
[Medical Device Safety Standards Introductory Series Seminar 2024] Session 1: Medical Device Regulations and Safety Standards
An introductory seminar on safety standards for medical devices that will be useful to know! This is the 2024 revised edition of last year's highly acclaimed introductory series seminar. We will incorporate the latest information and clearly explain the overview of standards related to medical devices, as well as safety testing and evaluation points in a total of five online seminars. In this seminar, we will introduce the regulatory overview for medical devices in the United States, Europe, and Japan, as well as the standards for non-clinical trials and evaluations required for drug applications. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
[Event] Technical Consultation Meeting on Safety Evaluation of Laser Light Emission
In recent years, the planned abolition of FDA Laser Notice 50 has been announced in the United States, and in Europe, regulations such as EN 60825-1+A11 and EN 50689 have been issued, leading to significant changes in regulations regarding laser products. Do you have any concerns about compliance with safety standards for laser products being shipped to the U.S. or Europe in relation to these regulations and standards? To address such customer inquiries and concerns, we will hold a free individual consultation session regarding compliance with safety standards for laser products. Our experienced specialists from UL Solutions, which has a 130-year history and leads safety science through a global network, will carefully answer your questions and concerns. You can check the details of the technical consultation session by clicking the "Details & Application" button below.
-
[Face-to-Face Seminar] Comparison and Key Points of IEC 62368-1 Edition 3 and Edition 4
IEC 62368-1:2023 (4th edition) was published on May 26, 2023. At this time, the 2nd and 3rd editions are still in circulation, and their adoption varies by country and region. However, standards based on the 4th edition are expected to be gradually adopted in the United States (UL) and Europe, so it is necessary to prepare for the evaluation of the 4th edition. To facilitate a smooth start to the evaluation of the 4th edition, this seminar will explain the main differences between the IEC 62368-1 3rd and 4th editions, based on the guideline document Impact Analysis, by experienced Japanese experts from UL Solutions. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
UL Solutions Seminar 2023
We will be holding the "UL Solutions Seminar," which has received great acclaim every year, again this year. This time, we are pleased to welcome Professor Yuji Ikegaya, a brain researcher from the University of Tokyo's Faculty of Pharmaceutical Sciences, as our keynote speaker, who will talk on the theme of "The Future of the Brain and AI." Additionally, we have prepared 15 live seminars that will provide the latest information on standards, regulations, and technologies that are of particular interest across a wide range of fields. Viewing the keynote speech and participating in all live seminars is free of charge. We encourage you to take this opportunity to join us. For details on the 15 live seminars, please check "Details & Registration" or refer to the related materials flyer.
-
[Complete 6 Sessions Introductory Seminar] Session 6: Introduction to Testing and Evaluation Standards for Medical Devices – Biological Evaluation in the Respiratory Gas Pathway of Medical Devices (ISO 18562)
Medical devices with "respiratory gas pathways," such as anesthesia machines and ventilators, significantly contribute to our lives in the field of treatment. However, they also carry the risk of introducing harmful particles and chemicals from the outside along with oxygen into the body. ISO 18562 requires testing and evaluation of particles, volatile organic solvents, and condensation that occurs in the pathways of medical devices with respiratory gas pathways, playing a crucial role in ensuring safe use. This seminar will provide a simple introductory overview of the testing and evaluation requirements outlined in ISO 18562. It will also explain the relationship with ISO 10993, which is often considered difficult to understand, and discuss the factors that lead to the generation of particles and chemicals from medical devices. Additionally, we will present the latest trends regarding the ongoing revisions of the standards. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
[Event] Technical Consultation on Compliance with Light Radiation Safety Standards for Laser and LED Products
In recent years, we have received many inquiries from manufacturers considering the incorporation of lasers and LEDs into their products regarding the safety of light radiation for the human body and compliance with regulations in the countries where they sell their products. We will hold a consultation meeting as an opportunity to address various concerns and questions that manufacturers may have regarding regulations and standards. You can check the details of the seminar by clicking the "Details & Registration" button below.
-
[Series Seminar] Latest Regulatory Information on Wi-Fi 6E Compatible Products in Major Countries of Asia, the Middle East, and Latin America
On September 2, 2022, the Ministry of Internal Affairs and Communications partially revised the Radio Law Enforcement Regulations, finally allowing the 6GHz band to be opened in Japan, enabling the use of approved Wi-Fi 6E compatible products within the country. Additionally, as regulatory frameworks in various countries advance, inquiries from manufacturers considering future overseas expansion are increasing. This seminar will provide the latest regulatory information from major countries in Asia, the Middle East, and Latin America as a second installment following the first installment, "Latest Regulatory Information on Wi-Fi 6E Compatible Products in Japan, North America, and Europe." By obtaining the latest information from each country, participants can utilize it for future expansion plans and development reviews. <Content> - Asia regulatory information (South Korea, Thailand, Malaysia) - Middle East regulatory information (Qatar, Kuwait, UAE, Saudi Arabia) - Latin America regulatory information (Mexico, Argentina, Brazil), etc. - Information provision service Details of the seminar can be confirmed by clicking the "Details & Registration" button below.
-
[Complete 6 Sessions Introductory Series Seminar] Session 4: Introduction to Testing and Evaluation Standards for Medical Devices – Electrical Safety Testing (IEC 60601-1 Edition 3.2)
An overview of medical device regulations and key points of safety testing and evaluation! This is the fourth installment of a six-part online seminar that explains the overview of standards related to medical devices, as well as safety testing and evaluation points. In modern medicine, many medical devices are powered by electricity. These devices come into contact with patients during diagnosis and treatment processes. The contact occurs on the body surface or inside the body, exposing patients to potential dangerous situations such as electric shock or burns. IEC 60601-1 specifies the "basic safety" and "essential performance" necessary for medical devices (medical electrical equipment) to be used safely and effectively on patients. This seminar will explain the definitions of terms used in the standards, the regulatory framework including related subordinate regulations, risk management, usability engineering, programmable electrical medical systems, as well as requirements regarding protection against electric shock and burns for operators and patients, and testing requirements. We aim for participants to understand the key points of IEC 60601-1 and to visualize its overall framework. You can check the details and agenda of the seminar by clicking the "Details & Registration" button below.
-
[Complete 6 Sessions Introductory Series Seminar] Session 3: Introduction to Testing and Evaluation Standards for Medical Devices – Cybersecurity
Overview of Medical Device Regulations and Key Points of Safety Testing and Evaluation! This is the third installment of a six-part online seminar that explains the overview of standards related to medical devices and key points of safety testing and evaluation. ---- Session 3: Introduction to Testing and Evaluation Standards for Medical Devices – Cybersecurity In 2021, IEC 81001-5-1, a lifecycle standard for ensuring the safety, effectiveness, and security of healthcare and health IT systems, including medical devices, was issued. Major regulatory authorities, including the International Medical Device Regulators Forum (IMDRF), began issuing guidance for addressing cybersecurity in medical devices. In this seminar, we will explain the overview and noteworthy requirements related to cybersecurity, focusing on IEC 81001-5-1, which medical device manufacturers should consider when addressing cybersecurity. This is an opportunity to deepen your understanding of cybersecurity, which is also gaining attention in regulatory frameworks in Japan, the United States, and Europe, through a comprehensive approach across the product lifecycle.
-
[Series Seminar] Latest Regulatory Information on Wi-Fi 6E Compatible Products in Japan, North America, and Europe
On September 2, 2022, the Ministry of Internal Affairs and Communications partially revised the Radio Law Enforcement Regulations, finally opening the 6GHz band in Japan, allowing the use of approved Wi-Fi 6E compatible products within the country. However, the use of Wi-Fi 6E must meet the regulatory requirements of each country and region. This seminar will serve as the first installment explaining the latest regulatory information for Wi-Fi 6E compatible products, providing updates on Japan, North America, and Europe, as well as basic knowledge about Wi-Fi 6E and differences in testing content compared to previous standards. We hope this will be useful for your future development and testing preparations, as well as cost estimations. Additionally, the second installment of the seminar is planned to cover the latest regulatory information from countries outside of Japan, North America, and Europe, so please look forward to that as well. Those who register for this seminar will receive further information. You can check the details and agenda of the seminar by clicking the "Details & Registration" button below.
-
[Complete 6 Sessions Introductory Series Seminar] Session 2: Introduction to Testing and Evaluation Standards for Medical Devices - EMC Testing
Overview of Medical Device Regulations and Key Points of Safety Testing and Evaluation! This is the second installment of a six-part online seminar that explains the overview of standards related to medical devices and key points of safety testing and evaluation. ---- Session 2: Introduction to Testing and Evaluation Standards for Medical Devices - EMC Testing Technical standards for medical devices include individual standards from the IEC 60601-1 series and the IEC 60601-2 series, which are diverse and complex. In recent years, revisions to EMC standards have also been made. In this second session of the introductory series on safety standards for medical devices, we will explain the positioning of IEC 60601-1-2 and provide a basic overview of the test plan and risk assessment required by this standard. We will also discuss the changes made in Ed 4.1, which was announced in 2020. You can check the details and agenda of the seminar by clicking the "Details & Registration" button below.
-
[6-Part Introductory Seminar Series] Session 1: Introduction to Regulatory Compliance for Medical Devices - Overview of Domestic and International Regulations and Introduction to Related Testing Standards
Overview of Medical Device Regulations and Key Points of Safety Testing and Evaluation! This is the first installment of a six-part online seminar that explains the overview of standards related to medical devices and key points of safety testing and evaluation. ---- Session 1: Introduction to Medical Device Regulatory Compliance - Overview of Domestic and International Regulations and Introduction to Related Testing Standards In the regulatory submission for medical devices, it is required to demonstrate safety in use through multiple tests and evaluations applicable as non-clinical trials. However, conducting tests and evaluations in each field necessitates a deep understanding of the related standards, which can be time-consuming in preparing the submission. Additionally, standards are constantly updated with new versions and releases, requiring medical device manufacturers to invest effort in compliance. This seminar will explain the regulatory overview of medical device submissions in the United States, Europe, and Japan, and introduce the relevant testing and evaluation standards associated with medical device regulatory submissions. You can check the details and agenda of the seminar by clicking the "Details & Registration" button below.
-
UL Solutions Seminar 2022
We will hold the "UL Solutions Seminar," which has received great acclaim every year, again this year. This time, in addition to a keynote speech titled "Reverse Time Machine Management Theory" by Ken Kusunoki, the author of "Competitive Strategy as Story," you can also view 13 latest topic seminars on the latest standards and regulations presented by our experts for free. For more details, please check the PDF or "Details & Application." 【Introduction to Live Seminars (Partial)】 ■ November 15, 2022 (Tuesday) 14:00 - 14:45 Overview of IEC 60601-1 Third Edition Amendment 2 ■ November 24, 2022 (Thursday) 14:00 - 14:50 Trends in battery standards, testing, and regulatory information from various countries ■ November 29, 2022 (Tuesday) 14:00 - 15:00 Acceptance trends of IEC 62368-1 in various countries and recent key topics, trends of IEC 62368-1 Fourth Edition ■ November 30, 2022 (Wednesday) 14:00 - 16:00 Latest trends in radio laws in various countries, focusing on Europe (EU/UK), North America, and Japan
-
Automotive Technology Center Expansion! Online Tour Information
We will hold an online tour to introduce the Reverberation Chamber (RVC), which will start operations in October 2022. Even for customers who find it difficult to visit the site in person, you can view the expanded Automotive Technology Center online. In addition to the RVC, we will also introduce the EHV Chamber, which is a fixed-dynamo equipped anechoic chamber. In the automotive industry, there is a demand for quick responses to changes in the environment and regulations surrounding vehicles. The UN ECE Regulation has introduced the RVC method, which is closer to real-world conditions compared to the traditional ALSE method (Antenna Radiation Method). The RVC can generate a uniform electric field in the anechoic chamber, allowing for tests that simulate the electromagnetic environment of urban areas where vehicles are actually used. We hope you take this opportunity to view our new facility.
-
Automotive Technology Center Expansion! Invitation to the RVC Open House (Viewing Event)
As many automotive parts are now electronically controlled, the automotive industry has begun to emphasize the implementation of EMC tests that simulate actual usage environments from the perspective of quality assurance. In accordance with UN ECE Regulation, the RVC method, which is closer to real-world conditions compared to the traditional ALSE method (Antenna Coupling Method), has been introduced. To quickly respond to changes in standards, UL Solutions has expanded its Automotive Technology Center and introduced a Reverberation Chamber (RVC), which will be operational starting in October. To commemorate the operation of the RVC, we will hold an open house, and we encourage you to apply for this opportunity. For details about the open house and how to apply, please check "Details & Application."
-
Q&A about SABS certification
Since 2017, certification by the South African Bureau of Standards (SABS) has begun, and submission of test reports issued by SABS accredited laboratories and obtaining certification are required. This document answers frequently asked questions from customers in a Q&A format based on confirmations with the SABS authorities. We hope this will be helpful for a smooth product introduction into the South African market.
-
[On-Demand Seminar] Biocompatibility Series of Medical Devices Biological Evaluation of Breathing Gas Pathways (ISO18562 / ISO10993)
In the biological evaluation of medical devices, compliance with the ISO 10993 (Biological evaluation of medical devices) standard is required. Additionally, for medical devices with breathing gas pathways, the application of the ISO 18562 (Biocompatibility evaluation of breathing gas pathways in healthcare applications) standard is also necessary. This seminar will explain the relationship between the ISO 10993 and ISO 18562 standards, and will provide examples of specific medical devices to illustrate the application of these standards.
-
[Online Seminar] Overview of Power Variation Test Standards for On-Board Equipment Installed in Electric Vehicles (ISO 21780:2020, ISO 21498-2:2021)
In recent years, automobile manufacturers have been promoting hybrid and electrification, increasing the voltage necessary for electrification to high voltage. Consequently, the importance of resistance to voltage fluctuations in onboard devices operating at high voltage has grown. The requirement standard for electrical and electronic components in vehicles equipped with an electric system (mild hybrid system) operating at 48 V DC, ISO 21780: 2020, was issued in August 2020, and the requirement standard for electrical and electronic components in vehicles equipped with an electric system (full hybrid system, electric system only) operating at 60 V DC or higher (voltage class B), ISO 21498-2: 2021, was issued in March 2021. This seminar will explain the power fluctuation standards for onboard devices necessary for hybrid and electrification in automobiles, specifically the outlines and testing methods of the standards "ISO 21780" and "ISO 21498-2." Please use this opportunity to gather information on the standards.
-
[Online Seminar] Key Points and Latest Trends in Radio Law Applications in the Asia Region + Latest Information on Major Regulatory Changes in Other Countries
When shipping wireless-equipped products to Asian countries and regions, it is necessary to meet the regulatory requirements of each country. These requirements vary significantly due to the different radio wave regulations in each country, and in recent years, there have been changes in regulations and revisions to the application processes. In this seminar, we will focus on the major Asian countries and regions of high interest to you, based on our application and research achievements across 200 countries/regions. We will explain the application procedures for radio wave laws, points to note during the application, the latest trends based on recent research results, and regulatory information. We hope this will be helpful for organizing information. Please check the detailed agenda and registration through the related materials (PDF) or the registration URL.
-
[Online Seminar] Explanation and Latest Information on SABS EMC Certification by the South African Bureau of Standards (SABS)
In the SABS (South African Bureau of Standards) certification system that began implementation in 2017, the submission of EMC test reports issued by SABS-accredited laboratories and the acquisition of certification are required. In this seminar, we will invite Mr. Lawrence Sibeko from SABS to explain the overview of SABS certification, which is essential for exporting not only general electrical and electronic products but also construction machinery, agricultural machinery, etc., to the Republic of South Africa. He will cover the target products, the validity period of the certification, points to note during the application process, penalties, and more. For detailed content, agenda, and registration, please refer to the link below.
-
[Free Technical Consultation] Technical Consultation on Compliance with Light Radiation Safety Standards for Laser and LED Products
In recent years, products using lasers and LEDs have been on the rise. Various products such as laser projectors, laser lighting, LiDAR/Time-of-Flight (TOF) sensors, head-up displays (HUD), 3D printers, and UV-C related products for Covid-19 measures have been adopted, and we have received many inquiries from our customers regarding evaluations. UL is pleased to announce that we will hold an online technical consultation session regarding compliance with light radiation safety standards for laser and LED-equipped products in response to customer requests. Experienced evaluation engineers from UL, a globally recognized third-party safety science organization, will be available to answer inquiries and questions from manufacturers developing related products. Typically, technical consultations are charged, but during this campaign period, they will be available for free, so we encourage you to take advantage of this opportunity. For examples of consultations and details about the free technical consultation session, please check the "Details & Application" link below.
-
【Limited to the first 15 companies】Free technical consultation on safety standards (60601, 61010) for medical devices, in vitro diagnostic devices, laboratory equipment, and testing/measurement instruments.
We will hold a free technical consultation session regarding the application and evaluation of safety standards for medical devices, in vitro diagnostic devices, laboratory equipment, and testing and measurement instruments. If you would like to confirm the applicable standards for your product under development before making a request for evaluation, check whether your product design complies with the applicable standards, or seek advice on necessary safety standards for new development, or request the latest trends and explanations of standards such as 61010-1/60601-1, please feel free to consult with us. We encourage you to take advantage of this opportunity. For examples of consultations, applicable standards, and details of the free technical consultation session, please check the "Details and Application" below.
-
[On-Demand Seminar] The Electromagnetic Wave/EMC Environment Surrounding Cars
Free, Limited Time Only In the United States and Europe, emissions regulations and fuel efficiency regulations have begun, and the electrification of vehicles continues to accelerate. In the near future, it is expected that the share of new electric vehicle (xEV) sales worldwide will surpass that of gasoline vehicles. As "electrification" and "connectivity" advance, automobiles, often referred to as moving computers, may experience significant accidents if electromagnetic noise emitted by onboard components causes electromagnetic interference between them. The importance of EMC (Electromagnetic Compatibility) testing is increasing to prevent accidents caused by electromagnetic noise and interference. Furthermore, electric vehicles are equipped with many wireless technologies similar to smartphones, such as Bluetooth, Wireless LAN, 4G, and 5G, necessitating compliance with radio laws in various countries. The requirements of these radio laws and the documentation needed for regulatory applications vary by country, and violations may result in penalties. This seminar will explain the regulations and requirements regarding the radio/EMC environment surrounding vehicles.
-
[Online Seminar] Biological Evaluation Process of Medical Devices for Breathing Gas Pathways (ISO 18562)
In the biological evaluation of medical devices, compliance with ISO 10993 is required, and among them, medical devices with a respiratory gas pathway are subject to ISO 18562. With the revision of ISO 10993-1 in 2018, the importance of biological evaluation based on biocompatibility risk has increased not only in Europe and the United States but also in Japan. For medical devices with a respiratory gas pathway, the 2020 version of ISO 18562 has been issued, and inquiries regarding the relationship with ISO 10993 have also been increasing. In this seminar, we will explain the relationship between ISO 10993 and ISO 18562, as well as an overview of the tests required by the structure of ISO 18562. Additionally, we will introduce related services provided by UL. --------- Target Audience: - Regulatory affairs personnel from manufacturers of medical devices with a respiratory gas pathway - Individuals considering conducting biocompatibility evaluations for medical devices - Those interested in ISO 18562