It can measure speeds from 0.1 to 25,000 rpm without range switching. It features an LED display that is clearly visible even in the dark. In addition to storing maximum, minimum, and last measurement values, as well as 10 other data points, it also has the capability to display conversions in a wide range of units such as rpm, cm/s, m/min, m, and km. The power supply consists of two AA alkaline batteries.

High-precision rotational speed measurement and motion analysis using stop motion are possible with the use of a flash. The measurement range is broad, from 30.0 to 35,000 fpm. It is equipped with a phase adjustment function that allows for image movement while maintaining synchronization. Additionally, it comes standard with an external signal connector, enabling synchronization and delayed flashing via external signals. The flash source is a xenon lamp, and the power supply is AC 100–115V.

It is easy to remove dirt, sand, grass, snow, salt, and mud in front of the door entrance.

Parts cleaner that performs air blowing and suction simultaneously ■Features ●No electricity required!! Operates solely on air By connecting to the existing air source in factory equipment, it can be used immediately. When you grip the air gun, the fan driven by the air motor rotates and performs suction. ●Compatible with a wide variety of liquids Electric dust collectors have many restrictions on the types of liquids that can be used (such as coolants and oils), but the M3470MT, being air motor-driven, can accommodate a wide range of liquids.

It can measure from a low speed of 0.1 to 25,000 rpm without range switching. It features an LCD type display that shows large numbers and units. In addition to storing maximum, minimum, and last measurement values, it also has the capability to convert and display a wide range of units such as rpm, cm/s, m/min, m, and km. The power supply consists of two AA alkaline batteries, allowing for approximately 60 hours of continuous measurement in an energy-saving design.

This is a standard type portable pH meter that can also measure temperature. By connecting a separately sold ORP electrode, it is also possible to measure ORP (oxidation-reduction potential).

Simultaneously measure pH and EC with simple operation. The MF2PET-981151H and MF2PET-981251H are portable types that can measure pH/EC/TDS/°C with a single electrode. Both pH and EC can be manually calibrated at one point, making them recommended as entry-level devices. They can be used for various applications such as environmental surveys, water quality testing, wastewater, and hydroponics. The difference between the MF2PET-981151H and MF2PET-981251H is the measurement range for EC/TDS.

■Features ● SUS304 stainless steel workbench for clean rooms ● BA finish resembling a semi-mirror surface ● Top surface with R bending processing

● Stainless steel workbench for clean rooms ● Weight capacity ● BA finish resembling a semi-mirror surface ● Welded type ● Top with R-bend processing

Medical chair made with antibacterial, alcohol-resistant leather.

Stainless steel cleaning equipment locker

● Compared to conventional products, it is ultra-lightweight, making the transportation and replacement of the balance easier. ● Its compact size makes it convenient to carry. ● With two types of lifting widths to choose from, it can be balanced and lifted safely and reliably according to the load and working environment. ● The maximum load is displayed prominently, allowing for easy confirmation and contributing to safe operations.

A backpack-style body cooling system with mobility that circulates cold water within the wear. Achieves heatstroke prevention and improved work efficiency. ● Cooling effect lasts for a long time ● Temperature adjustment between 7°C and 20°C is possible ● Effectively cools even in high-temperature environments above 40°C.

Adding mobility to a chiller-type body cooling system that circulates cold water within the wear. It demonstrates its effectiveness in harsh working environments where movement is frequent and air conditioning is ineffective. Being a carry type, it allows for light and free movement. Achieves heatstroke prevention and improved work efficiency. ● Cooling effect lasts for a long time ● Temperature adjustment possible between 7°C and 20°C ● Effectively cools even in high-temperature environments above 40°C.

Continuously monitor the ozone concentration and display it digitally on the main unit's screen. If the measured ozone concentration exceeds the specified level, an alarm will be displayed on the screen, and a relay can be activated.

The MI1PS-1500NM can quickly measure the thickness of varnishes, paints, and electroplated coatings on iron/steel or non-ferrous metals. The MI1PS-1500NM is a portable type of thickness gauge that provides reliable and accurate film thickness measurements.

A meeting desk suitable for small group discussions, with drawers.

A compact gas lift meeting desk that allows for casual meetings.

■Features ● Stainless steel workbench for clean rooms ● Elegant hairline finish ● Although designed for clean rooms, it is also well-received in various factories and research facilities.

■Features ●Foldable punching workbench for clean rooms ●Space-saving and can be brought in through narrow entrances

Lightweight stainless steel cart with folding handle (autoclave compatible)

This is a super compact oxygen concentration meter with a waterproof structure rated IP 65 (for heavy water jets) and shock-resistant design, capable of withstanding harsh working environments. It comes with a pre-set two-stage alarm system. When the gas concentration in the working environment reaches the alarm level, it alerts you with a loud alarm sound, flashing light, and vibration. We recommend its use to ensure the safety of workers from oxygen deficiency.

Industry-first, patented technology equipped Truck interior transport system High-performance loader made from a strong and flexible new stainless steel material Lightweight, unbendable, freeze-resistant, rust-resistant

It can quickly measure the thickness of varnish, paint, and electroplated coatings on iron/steel or non-ferrous metals. It is a portable type of thickness gauge that provides reliable and accurate film thickness measurements.

It can quickly measure the thickness of varnish, paint, and electroplated coatings on iron/steel or non-ferrous metals. It is a portable type of thickness gauge that allows for reliable and accurate film thickness measurements.

It is designed for use in the field and in laboratories. Manufactured under strict international quality standards, it guarantees reliable operation for many years. The measurement probe is equipped with a wear-resistant carbide tip. This means it has an almost unlimited lifespan. The plastic probe foot is designed with a V-groove, allowing for stable positioning on horizontal, cylindrical, or curved surfaces.

Shavings container / Ashtray Recycled wood / Hinoki Compliant with the Green Purchasing Law

● It comes with a turntable. (360-degree rotation with a stopper every 45 degrees) ● It comes with a roller conveyor. ● A spring-back mechanism has been added to the release handle. ● In case of an emergency, simply releasing your hand will stop the descent.

Using a press cart's loading platform on the table, it can prevent scratches on the workpiece due to the PVC mat. A spring-back mechanism has been added to the release handle (table lowering device). In case of an emergency, simply releasing your hand will stop the descent. Equipped with a highly durable pump and a robust cylinder, it ensures safe and comfortable lifting and lowering.

Circulate cold water within the wear Chiller-type body cooling system ● Cooling effect lasts indefinitely ● Temperature adjustment possible from 7°C to 20°C ● Effectively cools even in high-temperature environments above 40°C