The MF2PTM-7741H is a portable digital spectrophotometer that can measure ultra-low concentrations of total hardness and low concentrations of iron with just this one device. The reagents used for measurement can be selected according to the frequency of measurement. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

Excellent visibility with a large LCD ■Features ● The large digital display is convenient for stationary use due to the depth of the main unit. ● Measures relative humidity over a wide range (10-90% RH). ● Battery level can be easily checked at a glance.

■Features ●This is a sturdy welded cart made of SUS304 with a plate thickness of 1.5t, reinforced firmly on the cargo area. ●The casters are also made of SUS materials, making it suitable for use in food factories and clean rooms.

A dedicated ramp that allows for smooth loading of items onto an electric stair cart. ■Features ● Heavy items such as copiers can be smoothly loaded onto the cart. The ramp connects the cart and the ground, eliminating the need to lift the load. It can also be used as a stopper to prevent items from falling during stair climbing.

The MF2PTM-7732H is a portable digital spectrophotometer that measures dissolved oxygen (0.0 to 10.0 mg/L). The dedicated reagents used for measurement can be selected according to the frequency of measurements. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

The MF2PTM-7733H is a portable digital spectrophotometer that measures high concentrations of ammonium ions (0.0 to 100.0 mg/L). You can choose the dedicated reagents for measurement according to the frequency of use. Additionally, this device allows for numerical verification and calibration of the main unit using a validator (standard solution set). This ensures high accuracy and reliability, providing peace of mind.

This is a lighted stand magnifier that can be used for detailed work. The 72 LED lights can be adjusted to 10 levels of brightness and can be changed to three different colors. The stand, which has casters for easy movement, can change height by altering the number of poles, allowing it to be used while standing. The arm section features a stable spring arm that can be securely fixed in place.

This heater is resistant to rust, ideal for outdoor work, and can boil water as long as there is a power outlet. The M26NH-1000TCS comes with temperature control and a timer function (the other two models do not have temperature control or a timer function).

This is a dust collector equipped with a workbench for blowing away cutting chips and other debris attached to workpieces processed by machine tools.

By using conductive vinyl leather and casters with excellent conductivity, we have achieved a conductivity performance of less than 10^8Ω. Assembly, cleaning, and packaging are carried out in a clean room, allowing for easy cleaning during transport into the clean room. Electrical performance is below 10^8Ω. Class 100 compliant.

The areas where the PP band contacts during packaging operations and the corners of the packages are protected with evenly spaced perforations, allowing for easy cutting by hand.

■Features ●High Image Quality High-sensitivity detector (NETD < 40mK) Provides clear thermal images of the target.

Front and rear recording with GPS functionality. A high-quality dashcam that allows you to view high-definition videos without special software.

The MI1G-80TM is a temperature and humidity logger with a massive memory capacity of 250,000 per channel, featuring a digital display for each of the temperature and humidity channels. The humidity sensor probe comes with a 2 m cable, allowing for temperature and humidity recording in locations distant from the logger body or in tight spaces.

■Features ● It has one digit higher accuracy than general platform scales. ● It has a built-in rechargeable battery, allowing it to be used in places without a power supply.

To prevent scaling in cooling towers and heat pipes, we monitor the corrosion of pipes caused by concentrated residual chlorine and calcium carbonate. This single unit measures the increase in concentrated chlorine levels using conductivity, the rise in calcium carbonate water hardness using TDS, and the timing for membrane replacement using cumulative flow, all of which are reported via a buzzer alarm.

● High-precision data logger with a measurement accuracy of ±0.1℃. ● Compatible with 4-wire platinum resistance temperature sensors. ● Recorded data can be managed directly in Excel. ● Designed to be easy to hold even with small hands.

■Features ● A highly breathable mesh-structured backpack for disinfectant spraying. ● Easy operation by simply placing a tank filled with solvent in the center pocket and pressing a button. ● Enables quick and efficient spraying from wide areas to narrow spaces. ● Spray reach distance is approximately 90cm. ● Can create a fine mist of around 50μm that dries quickly, allowing for balanced and uniform spraying. ● Comes with a wireless remote control with 8-speed adjustment functions. ● Concentration of disinfectant can also be controlled. ● Rechargeable via MicroUSB port (operates for 5 to 16 hours).

Easy visibility from the rear, simple and safe design. Frame installation is easy—just place it down. Made with high-durability tarpaulin sheet. *Please check the dimensions of the cargo bed as they may vary depending on the model year and type of the light truck.

●Standard type with excellent cost performance ●Equipped with a hand valve as standard ●Achieves a discharge capacity of 80 l/min

Wood Transport Long-Length Cart No. 1 (800kg) Model Number: M1657Y-800kg-1T Please see below for the price.

Search for moisture. Detect moisture with sound and light. ■Features Simply slide the sensor surface over the item you want to measure, and it will detect moisture with a "beep" sound and LED light, making it very easy to use.

Usable in high humidity harsh environments ● Compliant with IP68 standards, it can be used in high humidity and dusty environments (when using rechargeable batteries) ● It has a built-in rechargeable battery, so it can be used in places without a power source. ● Excellent responsiveness. ● IP68 compliant.

Can be used in high humidity environments ● Compliant with IP68 standards, making it usable in high humidity and dusty environments (when using rechargeable batteries) ● Equipped with a built-in rechargeable battery, allowing use in locations without a power source. ● Excellent responsiveness. ● IP68 compliant.

The scraper and the cut with a central indentation make it easy to remove dirt attached to the boots.

● The easy-to-grip backrest is made of resin and gently supports the lower back. ● The seat uses molded urethane, providing a firm and high-quality seating experience. ● The height adjustment lever can be operated from all directions. ● The seat and backrest can be wiped clean with alcohol or sodium hypochlorite. ● The backrest that fits the lower back has a structure that minimizes dust accumulation and is equipped with a handle for easy pulling. ● It is resistant to dust accumulation and easy to maintain.

Simply by pushing it with your hand, cleaning inside and outside the facility can be done easily and effectively. Its compact and lightweight design allows it to perform excellently in tight or crowded spaces. By pushing the machine forward, the gear system rotates the broom, reducing cleaning costs without the need for a motor.

Warm and comfortable baths in winter: 'bath heaters' that can be installed in existing bathrooms.

● All stainless steel mesh cart (double door type) ■ All stainless steel mesh cart (double door type) ● The main body and caster fittings are all made of SUS304, making it resistant to rust and suitable for use in clean rooms. ● Finished product ● Material: Stainless steel (SUS304) ● Country of manufacture: Japan

- This is a two-tier cart made of welded stainless steel. - Since both the main body and the caster fittings are made of SUS304, it can be used in food factories and clean rooms. - Finished product - 2 swivel casters and 2 fixed casters - Material: Stainless steel (SUS304), wheels: nylon urethane, caster fittings: stainless steel (SUS304)