Continuously adjustable for a comfortable temperature - Comes with a clean pocket - Heats up quickly and excels in rapid heating. Emits orange light centered around near-infrared rays.

High-spec model of the Edge series with the new DPQ (Depth Acquisition) feature. A microscope with significantly improved image quality and functionality. It is equipped with new features such as 4K ultra-high definition, depth of three-dimensional objects (DPQ), enhanced LED controller (eFLC), and positioning pointer (APL).

This device is a portable torque measuring instrument specifically designed for static measurements, such as measuring the torque for tightening or loosening screws, or measuring the breaking torque due to twisting. It features a large, easy-to-read display, simultaneous reading of torque values for both right and left turns, a judgment function, and a battery level indicator, making it a multifunctional torque gauge. Depending on the measurement target, the tip bit or fixture can be replaced for use.

■Features ●Stainless steel cart with a perforated top panel

Highly active in various scenes from small to large areas. This 20-gallon (75.7ℓ) unit can operate for years. As a durable model for commercial use, you can rely on it for the collection of liquids and solids. The non-corrosive tank opens up to 31.75 cm at the top, making drainage easier.

Mesh pallet + square type FREC bag Perfectly fits the mesh pallet Size: (W1180×D910×H900) Quantity: 10 pieces per pack

● Uses a permanent electromagnet, unaffected by power supply after excitation. ● Does not require power during transport, so the workpiece being held will not fall even if the power is cut off. ● Remote control operation is possible for models over M3997EM-1500KG. ● Automatic mode allows for the attachment/detachment of workpieces, capable of handling one 6mm thick steel plate.

This is a non-adhesive tape that supports four languages: Japanese, English, Chinese, and Korean. It can be used anywhere, regardless of the location.

This is a flat pallet with a mesh top (wire diameter 6.0φ, mesh pitch 50×50). It is the base for the net pallet (M227NP-B5CAT/M227NP-B7CAT). It can also be used as a cart (M227NP-B5CAT/M227NP-B7CAT).

IP54 equivalent dustproof and waterproof performance, low center of gravity, high stability, high load capacity. Easy transportation with electric assist. Battery and controller can be placed within easy reach.

Say goodbye to messy cuts and difficulty in cutting! A double-sided corona treatment specification that anyone can easily use on-site.

For measuring the sugar content and concentration of fruits, vegetables, soy sauce, and sauces, it features waterproof performance (IP67) allowing the main unit to be washed, ensuring hygiene. It charges with a USB Type-C cable (included as standard) and can perform approximately 1700 measurements on a full charge. It takes about 1.5 hours to fully charge. With dimensions of 84mm in height, 23mm in width, and 14.5mm in thickness, it is compact enough to fit in your pocket for easy portability.

Can be used in hazardous locations (Zone 1) such as oil, gas, and chemical plants. It is easy to install and operate, making it easy to implement, and it can handle detailed data efficiently, which is highly regarded for its adaptability in daily "predictive and preventive maintenance" operations.

Stainless steel cart (600×450×830) with anti-static casters

Stainless steel cart Standard casters = 100φ nylon urethane, SUS fittings, fixed caster on the handle side, swivel caster at the front

Autoclave compatible Heat resistant: High temperature: 150°C Low temperature: -40°C

■Features ●Mobile Loading Cart Ideal for loading and unloading at different levels within a building. Since it is a cart, it does not fall under the category of an elevator.

Height (for seated work) H740mm Height (for standing work) H830mm *The uniform load capacity indicated by the manufacturer for the workbench is based on a safety factor of 20%.

A cart for easily moving 50(75)L folding containers. Equipped with casters with a diameter of 60mm and stoppers.

The tightening of the band is performed manually using lever operation.

This one device is for vacuum cooking. It is a vacuum cooking thermometer set with a very fine needle sensor (φ1mm) and a mousse tape. It can quickly measure the center temperature of vacuum-packed ingredients while minimizing food leakage.

The UV integrated light quantity and illuminance meter MI1UVS-239M with data logger function is used for managing UV LED light sources. The MI1UVS-239M simultaneously measures UV illuminance/integrated light quantity and temperature, displaying the integrated light quantity, UV illuminance values, temperature, and measurement time in real-time. The MI1UVS-239M can graphically display changes in UV illuminance and temperature on the device's screen, and with dedicated PC software, it can read data and graphs, allowing for the printing of test reports.

■Features ●Uses Chemitec with high chemical resistance as the surface material. It is ideal as a substitute work surface for experiments using strong acids and strong alkalis.

Table cart

Table cart

●Environmentally friendly chrome-free products. ●Frames made with ZAM or KOBEMAG, excellent corrosion resistance. ●No paint, so there is no paint peeling.

A lightweight and durable hand truck has been newly introduced.

●Obtained measurement certification in China ●High performance-to-price ratio among similar products ●Language options in both Chinese and English ●High precision and stable performance

The ladder is loaded, but it's just a little, so I guess it's okay~ There are steps at the front, but recently I've been getting on and off from the back~ I'm busy with work and don't have time to send it out for installation and maintenance~ Since it's a rental vehicle, I can't modify the lifting device. It's just attached to the lashing rail, so it can be used immediately from the day it arrives, whether at the front or back. If you raise the tailgate, it's only 55mm, so it can be stored compactly.

■Features ●Able to test vibrations in any two of the three channels (CH1, CH2, REV) and three directions (X-axis, Y-axis, Z-axis) ●Five measurement modes: three parameter measurement (AVD mode), dynamic time, domain wave (TIME mode), dynamic spectrum (FFT mode), data sampling (sample mode), rotational speed measurement (REV mode)