■Features ● It is a head-reversing type that can be used if there is space to swing the wrench more than 30°. ● This product incorporates a backlash-free worm, making it less likely for the opening dimensions to shift, thereby improving work efficiency. ● It is ideal for tightening bolts and nuts in areas with torque regulations in automobiles, motorcycles, machinery, and equipment, as well as for tightening pipes in air conditioners and coolers. ● Accuracy is guaranteed up to ±4%. ● The monkey head can be removed, and optional heads can be attached for use.

■Features ●This is a tension gauge that applies the force of springs to measure push force, pull force, and leaf springs, represented in a cylindrical shape with a scale, allowing for precise measurements. The scale is engraved, ensuring it remains clear for a long time. ●For measurements in a horizontal position, please refer to the table below for standard use. When using in a horizontal position, please add the error at horizontal position according to the dimension table to the actual measured value. ●There is also a type with a setting needle and zero point adjustment.

■Features ● Since it is a digital type that directly reads the torque value, the reading error is "zero." ● It uses a large, easy-to-read LED display. The display surface is inclined at a 50° angle for easy reading. ● Accuracy is guaranteed to be ±1% + 1 digit. ● You can switch the operating mode according to the type of torque wrench being inspected.

■Features ●Since it is a digital type that directly reads the torque value, the reading error is "zero." ●The angle of the display section can be adjusted within a range of 70° to the rear.

■Features ● Can be installed on-site, allowing for torque testing of large torque wrenches. ● Since it is a digital type that directly reads torque values, the reading error is "zero." ● The angle of the display section can be adjusted within a range of 70° backward and 90° to the left and right. ● By connecting the digital display to a computer, data management is possible. ● Accuracy is guaranteed to be ±1% + 1 digit. ● The operating mode can be switched according to the type of torque wrench being tested.

The only suction-type hand dryer that does not scatter water droplets or bacteria. ■Difference between this device and conventional hand dryers Conventional hand dryers scatter water droplets and bacteria into the air for blow-drying. This is the only suction-type hand dryer in the country that protects you from the threat of invisible water droplets and bacteria.

A highly visible dustbin that clearly shows the types of garbage.

This is a shoe cleaner that effectively removes snow and mud stuck to the surface and soles of shoes simply by moving your feet back and forth.

This is a shoe cleaner that effectively removes snow and mud from the surface and sole of shoes simply by moving your feet back and forth.

■Features ●Standard caliper in long size, with JIS mark.

Easy 30-second setup The interior is designed with aluminum coating, making it difficult for silhouettes to show.

Reclining possible Ideal for leisure and outdoor activities Weight capacity: 150kg, set up in 30 seconds, no tools required, compact

A versatile type of infrared thermometer that can accurately measure various temperatures.

Stable transport of vertically long cases with the side belt method.

Pests are attracted by the LED light and collected in a special insect-catching bag by a powerful suction fan. By increasing the number of LED bulbs from 6 to 12 compared to conventional products, the number of captured insects has increased.

For the transportation of soil, compost, wood, construction materials, civil engineering materials, agricultural materials, etc. Ample dump capacity Tough suspension and internal expansion brakes Stable driving with the same suspension mechanism as civil engineering carriers Maximum load capacity of 600 kg

For small to medium-sized houses with φ31.8mm rails installed. ■Features ● Compatible with φ31.8mm, 600mm (center to center) rails, workbench height is adjustable from 630 to 1,620mm. ● Movement is easily controlled with the foot pedal of the workbench. ● When moving the work row, operate the steering handle to move.

Reducing the burden of living in a garage during outdoor use. Acceptance of evacuation vehicles that cannot enter the shelter. Setup takes just a few minutes with a one-touch system.

Large flatbed no-puncture steel two-wheeled transport cart with cat (includes anti-collapse belt pass-through) Folding flatbed with cat legs and extended steel scoop plate.

●Reduction of compressed air consumption ●Wide-angle blow (full angle 15 degrees) ●Low noise ●Adjustable air consumption (M1342P-900G, M1342S-900G, M1342S-909AG)

Six-wheel stair transport vehicle with cat (large cargo platform) equipped with load collapse prevention belt loops ● Load capacity on flat ground: 100kg (however, this may vary depending on the worker's ability when using a steel plate platform for small jobs.) ● Weight: 18kg, made of steel ● Size: (H 1210 × W 580 × D 600–900mm) ● Effective cargo platform size: Pipe section 530 × 340mm, Steel plate section 420 × 220mm ● Expected kick-up height: 16–21cm ● Equipped with S-hooks for securing the cargo platform ● Belt loops and belts attached at four locations: up, down, left, and right

Each time you press the button, it dispenses 10 inches of tape. Weighing only 6 pounds, it's the perfect desktop size for small spaces. The refillable tank holds 8 ounces of water and efficiently activates 375 feet of tape.

●Compact with a capacity of 32kg ●Standard features ideal for precise measurement tasks ●Dustproof and waterproof with IP65 rating ●LCD display with a character height of 45mm ●SUS base cover is standard equipment

Ideal for food factories and meal centers ● For transaction certification (certified product) ● All stainless steel compliant with dustproof and waterproof grade IP65 ● Equipped with casters for easy mobility * When moving, please push the platform instead of the pole. ● Comes with a stopper for stable weighing

Wind speed of 2m, effective up to 24m, energy-saving Blade diameter: 150cm Air volume: stepless adjustment Output: 750W

The tabletop separate three-way L-type sealer shrink packaging machine (M166H-600LW) provides one-step sealing and shrinking. It can also be matched with a shrink tunnel for high-speed shrink wrap packaging. It comes with a work table and a film roller. The film roller includes a separator and a perforator. The sealer seals and cuts with a single L-type heating element of 0.32 millimeters width at once. It enhances the appearance and value of the product, protecting it from dirt, dust, moisture, and handling.

Adopts a collet chuck method to securely fix the bit. Demonstrates power in tightening tiny screws.

All-stainless steel body compliant with dustproof and waterproof grade IP65. This digital scale is packed with features that help improve work efficiency and prevent measurement loss in various industries, including food processing plants, beverage raw material manufacturing, fish markets, and production farms.

A flip-open type that makes it easy to change garbage bags.

Easy to carry and install. It strongly supports transportation work at construction sites, stores, and factories.