news list
1471~1500 item / All 3378 items
-

Large caster container case / Model number M1628D-715131T released.
A fully customizable trunk case made with high-strength, ultra-lightweight resin honeycomb core material.
-

Wireless Wind Speed Temperature Humidity Meter / Model Number MC41A-222S Released
●Graduated I/L type telescopic probe This graduated probe, with a maximum outer diameter of 10mm, can be fixed in both straight (I type) and 90° right angle (L type) positions, making it convenient for measurements inside ducts and allowing for precise verification of the insertion position of the wind speed sensor in millimeter units. It can also be inserted into duct measurement ports of international standards (3/8 inch).
-

Ball roller conveyor table 600×600mm (with waste discharge hole) Model number M2234VT-06A50H now available for sale.
■Features ●This is a ball conveyor table used for changing the direction of heavy objects and for mold racks, etc.
-

Air-driven ball roller conveyor table 600×600mm Model number M2234VLT-6A now available for sale.
■Features ●Usable in 360° directions A ball bearing unit that allows heavy objects to be moved in any direction with minimal effort. It helps to reduce labor in the transportation and storage of heavy items.
-

Large display transport caster container case / Model number M1628E-224681T released.
Fully customizable trunk case suitable for transporting and storing large display panels and similar items.
-

Vehicle-mounted low-temperature freezer -80℃ to -40℃ (15L) Model number M3083W-80WZ15B Released.
This is a compact deep freezer (ultra-low temperature freezer) that can be used with a vehicle power supply (DC 24V). It is suitable for transporting vaccines, pharmaceuticals, and samples that require ultra-low temperatures to be maintained precisely for long periods, which dry ice alone cannot achieve. - Compact deep freezer that can be mounted in a vehicle - Energy-saving model with a high-efficiency HC (non-fluorocarbon) compressor - Accurate temperature control within ±3℃
-

Vehicle-mounted freezer and cooler -20℃ to +22℃ (33L) Model number M3083ZY-40ZB now available for sale.
This is a cooler that can be used with a vehicle power supply (DC 12V). - A cooler that can be mounted in a car and is also portable - Maintains a temperature of 2 to 10°C for over 1 hour after power is cut off - Adopts a semiconductor cooling system that does not use refrigerants - Equipped with various alarm functions
-

High brightness LED coaxial spot lighting (blue) / Model number M228MGW-PC8M-BL0703 released.
By adopting the latest high-power components and utilizing the manufacturer's unique heat dissipation technology to improve luminous efficiency, we have achieved three times the illuminance*.
-

Ultrasonic Wind Direction and Speed Meter / Model Number M1145S-22NS Released
It is possible to perform high-response and highly linear measurements from a gentle breeze (0 m/s) to a strong wind area (90 m/s).
-

High-precision stainless steel platform scale 15kg (305×355mm) / Model number M1450CR-71M15RJPH released.
This scale is suitable for shipping packages from manufacturing, distribution, and offices. This series is characterized by its integration with PC-based shipping software, allowing for accurate and efficient data management at all times.
-

Economy platform scale 35kg embossed type (329×319mm) / Model number M1450CR-31M35RJPH released.
Thin scale for general weighing and animal weighing applications. It features a bright display with an intuitive and user-friendly interface. The thin steel construction ensures durability and reliability for various weighing tasks, from the office to the warehouse and even in veterinary clinics. It is also effective for weighing small animals. This scale is versatile and highly convenient.
-

Compact fume dust collector (AC100V with caster) / Model number M2621KR-911SK released.
It is easy to secure power with a 100V power supply. "Welding fumes" have become a specified chemical substance. Due to the potential carcinogenic effects and risks of neurological disorders for welding workers, it has been newly added as a specified chemical substance through the revision of the Industrial Safety and Health Act's specified chemical substance prevention regulations.
-

Acid and alkali resistant solvent apron / Model number M3682F-4511F released.
Strong against acids, alkalis, and other chemicals! Ideal for environments like factories that use chemicals.
-

Manual Stretch Film Packaging Turntable (Φ25cm×50cm) / Model Number M3441HSF25-50T Released
Manual packaging turntable for stretch film (Φ25cm × 50cm)
-

Digital Torque Driver (2.0 to 500.0 mN·m) / Model Number M428ID-05-J1S Released
Tightening of screws and bolts and final check Lightweight and compact with integrated display!
-

Digital torque driver upper and lower limit torque setting (0.020 - 1.500 N·m) / Model number M428ID-150S released.
Tightening of screws and bolts and final check Digital torque screwdriver with free rotation type
-

Lightweight Ball Roller Conveyor 600mm (with waste discharge hole) Model No. M2234UFH-06A Released
This is a product that has been unitized from press-molded plain bearings. With flexible combinations, it helps to reduce labor in the transportation and storage of heavy items. The basic lineup includes a waste discharge unit using M2234UFH, and we have also standardized a medium-duty unit that enhances load-bearing capacity by attaching reinforcement parts to the lightweight unit, as well as a one-touch waste discharge unit for heavy loads using M2234UFH.
-

Large floor-standing fan with variable wind speed for gymnasium, fine mesh guard, model number M1357HDC-100ETFG-CBSGS, now available for sale.
■Features ●Adopts fine pitch guards at the front and rear.
-

Handy manual water adhesive tape cutter / Model number M1211WA-2T released.
●No power required ●Easy operation ●Compact and lightweight
-

Small aluminum two-wheeled vehicle (for engine pump) / Model number M3067T-30153M released.
By placing it on this cart and spraying, you can work easily without carrying a heavy backpack sprayer. Instead of a "backpack sprayer," it is also possible to load and transport heavy luggage during outings.
-

HEPA filter air purifier negative pressure dust collector / Model number M3677HF-52311S released.
Remove harmful dust and particles, and the work environment will be enveloped in clean air.
-

Folding Mesh Pallet Box 1TON (W1500×D1150×H1130mm) / Model Number M611MSPA-1TON Released
A steel pallet that combines a pallet box and a post pallet. It can accommodate various types of cargo and is easy to knock down.
-

Liquid tank type explosion-proof vacuum cleaner Model number M2727ATEX-113116V released.
Wet Mix Immersion Separator. Used with water (oil-free). Designed to collect combustible dust in a liquid immersion tank and to inert it. Static electricity dissipation and conductivity. Meets the requirements for liquid sediment collectors for metal dust as outlined in NFPA 484.
-

High-performance HEPA filter cyclone vacuum cleaner Model No. M2452HE-221S Released
A high-performance dust collector equipped with a HEPA filter, jet pulse dust removal, and a long pack, all in one. It captures dust without letting any escape, ensuring a clean environment. Its lightweight design allows for smooth movement on-site.
-

Assembled cold storage foam pallet / Item number M3476EPS-8810T released.
●Easy to assemble and disassemble by one person ●Lightweight yet sturdy low-foam EPS material ●Excellent insulation performance with thick walls and a secure fit ●Insulated cold storage container with a pallet that can be used with a forklift ●Light-blocking and outside air-blocking with the included plastic pallet cover
-

Magnetic Stretch Film Holder for Hand Pallets (for 2 to 3-inch paper cores) / Model Number M3581FP-P23RPH Released
Can be used as a holder for loading wrap onto a hand pallet.
-

Shrink Tunnel (Bottle Label Shrink) / Product Number M337KSH-1000T Released
- Custom designs are possible to match the product. - Supports various product sizes through furnace connection. - Can be used with the furnace alone. - Can also be used on existing conveyors.
-

Digital Torque Driver (0.020 to 4 N·m) / Model Number M428ID-4-J1S Released
Tightening screws and bolts and final checks Lightweight and compact with an integrated display! Cordless for enhanced operability. Stable measurements can be taken even during long hours of work. Screw tightening counter function is also standard. Up to 5 channels can store pass/fail criteria, and even if tightening conditions change, settings can be easily adjusted by switching channels.
-

Net basket container with four wheels / Item number M778L-20RA released.
Container for 20kg (width 520mm) Can easily carry up to 5 containers. Due to its four wheels, it stands upright even when tilted, reducing the strain on your arms.
-

Drum can leak prevention round container Model number M38LPR-246L now available for sale.
It is ideal for the safe storage and transportation of containers containing waste liquids and hazardous liquids.