news list
1591~1620 item / All 3391 items
-

Aluminum bridge ramp / Model number M2572ALM-1825SL released.
It is convenient for loading agricultural machinery and motorcycles onto a transport vehicle.
-

Hand Clip Sealer W200mm / Model Number M367SR-200W Released
Easy sealing with just a push - Handheld impulse sealer. Perfectly seals plastic bags in about 1 second at work or at home!! (Can be extended to about 2 seconds with a timer)
-

Palette Strap Feeder PP Band Threading (1550mm) / Product Number M3441P-1550F Released
Palette strap feeder PP band threading (1550mm)
-

Waterproof illuminance sensor, no power supply required (0 to 150,000 lux) / Model number M761APG-PHM100SS now available for sale.
This sensor is used to measure the brightness of light as perceived by the human eye and is mainly used in places where lighting is important, such as sports venues, offices, art galleries, museums, and hospitals. It provides accurate measurements of lux illumination under various environmental conditions.
-

Height-adjustable step ramp board (1000kg) / Item number M2984HAS-45125T Released
It eliminates the obstacles on site and is effective in terms of safety measures. When high-altitude work vehicles or carts safely ascend and descend the steps at construction and civil engineering sites... For ramps in barrier-free environments... Using dedicated frames to bypass piping and create temporary walkways... and more. The load capacity is 1000 kg per unit. It can be used according to the needs of the site.
-

Dry fine dust HEPA filter vacuum cleaner (with collection bag) Model number M2727FH-20HEPA released.
●HEPA filter: 99.995% particle collection efficiency for 0.3 micron particles (tested) with a two-layer structure ●Complies with NEFA (National Fire Protection Association) standard 652 ●Dust-proof housing structure ●Uses industrial bypass motor ●Built-in suction power reduction indicator light
-

Submersible Heater S for Poly Tanks (900W) Model Number M26NH-P900S Released
This is a model compatible with resin containers for immersion heaters. By attaching a protective cover on the outside, it can be used with resin containers without the heater coming into direct contact with them (Note: the set temperature for resin containers is up to 50°C). It is equipped with a dry-burning prevention feature, ensuring safe use. The slim body makes it easy to fit into a jerry can, with an outer diameter of the protective rubber at 36mm, allowing it to easily fit into the opening of a jerry can.
-

Electric drum pump for kerosene and light oil (with auto shut-off nozzle) / Model number M58EPA-ATN now available.
Measuring and stopping are standard! Cost reduction through usage management! Pursuing reasonable prices The long-awaited flow meter integrated drum pump.
-

Self-propelled stretch wrapping machine / Model number ME4LE-AT now available for sale.
It is a lightweight and excellent self-propelled stretch wrapping machine. With a compact design, it doesn't require much storage space. It's easy to operate, allowing anyone to start wrapping with the push of a button. It can wrap approximately 100 times on a single charge. *Work size W1100×L1100×H1100 may vary depending on conditions.
-

Label peeling machine / Model number M2512P-110W now on sale.
Compact body for smooth peeling ● The backing width of the used labels can accommodate multi-row labels up to 110mm ● Compatible with high-quality paper, mirror coat, art paper, transparent labels, Tetronema, and synthetic paper (There may be restrictions depending on the material, so please consult us) ● Compact design that takes up little space
-

Wide Label Peeler (Backing Width 150mm) / Model Number M2512P-150W Released
●Compatible with backing paper widths of 50 to 150mm ●Wide type, compatible with various labels ●Options such as cumulative counters can be added ●Compatible with backing paper widths of 100 to 210mm ●Wide type, compatible with various labels ●Options such as cumulative counters can be added
-

Compact Label Peeler (Backing Width 160mm) / Model Number M2512H-160W Released
Label Peeling Machine ■Compact Type Label Peeling Machine (Backing Width 160mm) / Model Number M2512H-160W Short body model compatible with backing widths up to 160mm.
-

Shrink Tunnel (Energy-Saving Compact Type) / Model Number M852T-2514E Released
"Power saving" "Improved quietness" "Space saving" Realization of shrink tunnel
-

Hand Impulse Sealer W300mm / Model Number M367ST-300W Released
Hand Impulse Sealer W300/500mm ■Hand Impulse Sealer W300mm / Model Number M367ST-300W
-

Forklift construction machinery air conditioner Model number M3072ST-2200S now available for sale.
Battery-connected air conditioner Great for working in extreme heat! Compatible with 12V, 24V, 48V, and 72V batteries Can be installed in vehicles with a battery power source
-

Small Energy-Saving 1/2 Pulse Intermittent Air Source Generator Model Number M2067AR-10TKN Released
Small Energy-Saving 1/2 Pulse Intermittent Air Source Generator ■Features ● Reduces air consumption for air blow by 1/2 The opening and closing times of the valve are the same. If the working time is the same as that of conventional continuous blowing, air consumption can be reduced to 1/2. * Depending on the usage method, there may be cases where air consumption cannot be reduced to 1/2 or exceeds 1/2.
-

Aluminum bag compatible conveyor-type micro metal detector (standard transport width 150mm × passing height 40mm) / Model number M998T2R-J6BN-W150H40 released.
The micro metal detector is a new type of metal detection device that employs a detection principle completely different from conventional methods. This method allows for the detection of small SUS wires, chips, burrs, and wear particles, which were difficult to detect with metal detectors and X-ray foreign object inspection devices, even at sizes smaller than the test piece.
-

Forklift construction machinery air conditioner Model number M3072ST-2200S now available for sale.
Battery-powered air conditioner Great for working in extreme heat! Compatible with 12V, 24V, 48V, and 72V batteries Can be installed in vehicles with a battery power source
-

Latch lock hook with stop pin / Model number M502FB-09N released
Latch lock hook ★ With safety stop Basic working load: 0.9, 1.6, 2.6, 4.3, 6.5, 10.2, 12.6 tons
-

Digital UV Intensity Meter (High-Intensity UVB Only) / Model Number MI1UVR-60M Released
The MI1UVR-60M ultraviolet intensity meter is a compact, lightweight, pocket-sized digital ultraviolet measuring device that measures only medium ultraviolet UVB waves (280–315nm), which are said to have an impact on the skin that is 100 to 1,000 times greater than that of ultraviolet UVA waves.
-

Spot air conditioner cool fan (single-phase 100V specification) Model number M3469SAF-1180N released.
In the peak of summer, we are your strongest ally on site. Reduce electricity costs and improve the working environment!! A new concept with high airflow! Cool fan + spot cooler. Overwhelming!! Spacious and cool, and ECO-friendly! No need to worry about waste heat!
-

Portable Mixer (Medium Speed, Gear Reduction Type) / Model Number M3658HG-065AM Released
Medium speed use - gear reduction type The operating noise is very quiet due to the high-precision gear installation. ■Motor capacity 0.065kW to 0.75kW
-

Agricultural Seedling Soil Electric Mixer / Model Number M1825EA-2BCM4T Released
From concrete and mortar mixing to agricultural seedling soil preparation - Speedy and uniform powerful mixing - Lightweight design for easy mobility - A variety of models to choose from according to the scale of work
-

Digital Residual Chlorine Meter (Ultra High Concentration Total Chlorine) Model Number MF2RC-771H Released.
The MF2RC-771H total chlorine checker (UHR), ideal for swimming pools and spas, is a simple, accurate, and cost-effective way to measure a wide range of total chlorine. It comes with reagents for six tests.
-

Recycled rubber mat 15×1000×2000mm / Product number M1475RBM-151020S released.
● A thick general-purpose rubber mat. It can be used for various applications. ● A general-purpose rubber mat measuring 1m x 2m. Available in two thicknesses: 15mm and 20mm.
-

Water-oil solvent liquid floor penetration prevention grip suction mat / Model number M3650L2002AS-25N released.
Quickly absorbs oil stains and water Oil leak prevention Comes with a sticky PE sheet on the back Prevents slipping and stops absorbed water and oil from penetrating the floor surface. A versatile type that can absorb various liquids, including not only oil but also water, acids, and alkalis.
-

Tuning fork type analytical electronic balance (80g) / Model number MC52TG-84RS released.
World's first! Tuning fork type analytical balance Tuning fork type sensor comes with a reassuring 5-year warranty Wind shield with excellent usability and chemical resistance Optimal responsiveness and stability for trace weighing
-

Microscope with coaxial illumination function (HDMI output available) / Model number M511CX-Z311XMLTS released.
● High-definition microscope with coaxial lighting, ideal for observing reflective metals ● Comes with a dedicated remote control ● "Smooth movement" and "high resolution," further evolved high-definition microscope ● Equipped with automatic exposure ● The camera body has functions for saving and playing back still images, videos, and still images
-

Illuminance meter (0 to 150 klux) mV output / Model number MC8PHOT-13NS released.
High sensitivity mV, DC 4-20mA, 0-1V output, with level gauge and shielding plate. It measures illuminance (lux), defined as the ratio of luminous flux (lumens) incident on a surface to the unit area (m²). The spectral response curve of the photometric measurement probe approximates the standard photopic response curve V(λ), which is known as the response curve of the human eye. The difference in the spectral response from the standard photopic response curve V(λ) is calculated as error f'1. It has a robust structure, designed for long-term outdoor use, and is primarily used for meteorological measurements in daylight.
-

All-day solar radiation meter (Class A) μV output / Model number MC8PYRA-21NS released.
Standard all-weather pyranometer compliant with ISO9060:2018 Compact and robust case design with excellent heat dissipation and temperature characteristics Accuracy and reliability backed by ISO17025 accredited lab (equivalent to JCSS) High immunity to interference in the set environment